Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MC33816AER2

NXP Semicon · Power Management Specialized - PMIC · LQFP-64(10x10)

MC33816AER2 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CLK input External clock pin with an internal weak pull-up of typically 480 kΩ to VCCIO.
2 DRVEN input Driver enable pin with an internal weak pull-down of typically 480 kΩ to AGND.
3 RESETB input Device reset pin with an internal weak pull-up of typically 480 kΩ to VCCIO.
4 START1 bidirectional Trigger pin actuator 1 and Flag_bus(3) with an internal configurable pull-up or pull-down of typically 120 kΩ.
5 START2 bidirectional Trigger pin actuator 2 and Flag_bus(4) with an internal configurable pull-up or pull-down of typically 120 kΩ.
6 START3 bidirectional Trigger pin actuator 3 and Flag_bus(5) with an internal configurable pull-up or pull-down of typically 120 kΩ.
7 START4 bidirectional Trigger pin actuator 4 and Flag_bus(6) with an internal configurable pull-up or pull-down of typically 120 kΩ.
8 START5 bidirectional Trigger pin actuator 5 and Flag_bus(7) with an internal configurable pull-up or pull-down of typically 120 kΩ.
9 START6 bidirectional Trigger pin actuator 6 and Flag_bus(8) with an internal configurable pull-up or pull-down of typically 120 kΩ.
10 FLAG0 bidirectional General purpose I/O and Flag_bus(0) with an internal weak pull-down of typically 480 kΩ to AGND.
11 FLAG1 bidirectional General purpose I/O and Flag_bus(1) with an internal weak pull-down of typically 480 kΩ to AGND.
12 FLAG2 bidirectional General purpose I/O and Flag_bus(2) with an internal weak pull-down of typically 480 kΩ to AGND.
13 CSB input SPI chip select with an internal pull-up of typically 120 kΩ to VCCIO.
14 MOSI input SPI slave data input with an internal weak pull-up of typically 480 kΩ to VCCIO.
15 MISO output SPI slave data output.
16 SCLK input SPI clock input with an internal weak pull-up of typically 480 kΩ to VCCIO.
17 VCCIO power_in Digital I/O buffer supply rated for 3.3 V or 5.0 V, with a filtering capacitor required.
18 DBG bidirectional Debug pin and Flag_bus(12) with an internal weak pull-up of typically 480 kΩ to VCCIO.
19 DGND power_in Digital ground that must be connected to ground.
20 VCC2P5 power_out Internal 2.5 V digital power supply output that requires a decoupling capacitor.
21 VCC5 power_in Power supply input pin rated at 5.0 V with a filtering capacitor required; the battery voltage range is 5.0 V < VBATT < 32 V.
22 OA_1 output Current sense analog output and Flag_bus(10) with an internal weak pull-down of typically 480 kΩ to AGND.
23 OA_2 output Current sense analog output and Flag_bus(11) with an internal weak pull-down of typically 480 kΩ to AGND.
24 AGND power_in Analog ground that must be connected to ground.
25 VSENSEN1 input Current sense input comparator negative input for channel 1.
26 VSENSEP1 input Current sense input comparator positive input for channel 1.
27 VSENSEN2 input Current sense input comparator negative input for channel 2.
28 VSENSEP2 input Current sense input comparator positive input for channel 2.
29 VSENSEN3 input Current sense input comparator negative input for channel 3.
30 VSENSEP3 input Current sense input comparator positive input for channel 3.
31 VSENSEN4 input DC-DC current sense input comparator negative input.
32 VSENSEP4 input DC-DC current sense input comparator positive input.
33 D_LS6 input Low-side MOSFET drain pin monitor 6, rated -3.0 V to 75 V nominal.
34 D_LS5 input Low-side MOSFET drain pin monitor 5, rated -3.0 V to 75 V nominal.
35 D_LS4 input Low-side MOSFET drain pin monitor 4, rated -3.0 V to 75 V nominal.
36 D_LS3 input Low-side MOSFET drain pin monitor 3, rated -3.0 V to 75 V nominal.
37 D_LS2 input Low-side MOSFET drain pin monitor 2, rated -3.0 V to 75 V nominal.
38 D_LS1 input Low-side MOSFET drain pin monitor 1, rated -3.0 V to 75 V nominal.
39 VBATT power_in Battery input voltage rated -0.3 V to 72 V, with the operating range 5.0 V < VBATT < 32 V.
40 VCCP power_in Internal 7.0 V power supply output or external 7.0 V power supply input, with a filtering capacitor required.
41 G_LS7 output DC-DC low-side MOSFET gate pin actuator 7.
42 G_LS6 output Low-side MOSFET gate pin actuator 6.
43 G_LS5 output Low-side MOSFET gate pin actuator 5.
44 G_LS4 output Low-side MOSFET gate pin actuator 4.
45 G_LS3 output Low-side MOSFET gate pin actuator 3.
46 G_LS2 output Low-side MOSFET gate pin actuator 2.
47 G_LS1 output Low-side MOSFET gate pin actuator 1.
48 VBOOST input DC-DC feedback pin and boost voltage monitor pin, rated 0.0 V to 72 V steady-state.
49 B_HS5 passive High-side MOSFET bootstrap pin 5.
50 G_HS5 output High-side MOSFET gate pin actuator 5.
51 S_HS5 input High-side MOSFET source pin monitor 5.
52 B_HS4 passive High-side MOSFET bootstrap pin 4.
53 G_HS4 output High-side MOSFET gate pin actuator 4.
54 S_HS4 input High-side MOSFET source pin monitor 4.
55 B_HS3 passive High-side MOSFET bootstrap pin 3.
56 G_HS3 output High-side MOSFET gate pin actuator 3.
57 S_HS3 input High-side MOSFET source pin monitor 3.
58 B_HS2 passive High-side MOSFET bootstrap pin 2.
59 G_HS2 output High-side MOSFET gate pin actuator 2.
60 S_HS2 input High-side MOSFET source pin monitor 2.
61 B_HS1 passive High-side MOSFET bootstrap pin 1.
62 G_HS1 output High-side MOSFET gate pin actuator 1.
63 S_HS1 input High-side MOSFET source pin monitor 1.
64 IRQB bidirectional Interrupt output and Flag_bus(9) with an internal weak pull-down of typically 480 kΩ to AGND.

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package LQFP-64(10x10)
Category Power Supply Chip
Pins 64

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Battery voltage range VBATT -0.3 72 V 9
VCC5 input pin VCC5 -0.3 18 V 9
VCCIO input pin VCCIO -0.3 18 V 9
VCCP input/output pin VCCP -0.3 9 V 9
VCC2P5 output pin VCC2P5 -0.3 3 V 9
SPI interface and logic input and output voltage VMAX_LOGIC -0.3 18 V 9
VBOOST pin voltage range VBOOSTMAX 0 72 V Steady-state 9
Drain low-side MOSFET pin VD_LSX -3 75 V Nominal 9
Drain low-side MOSFET pin VD_LSX -8 75 V Transients t < 400 ns 9
Current measurement positive input pin voltage (VSENSEP1, VSENSEP2, VSENSEP3) VSENSEP -2.5 2.5 V Static at VCC5 < 10 V 10
Current measurement negative input pin voltage (VSENSEN1, VSENSEN2, VSENSEN3) VSENSEN -1 1 V Static at VCC5 < 10 V 10
Current measurement four positive input pin voltage VSENSEP4 -4.2 2.5 V Static at VCC5 < 10 V 10
Current measurement four negative input pin voltage VSENSEN4 -3 1 V Static at VCC5 < 10 V 10
Ambient operating temperature TA -40 125 °C Ambient 11
Junction operating temperature TJ -40 150 °C Junction 11
Storage temperature TSTG -40 150 °C 11
Thermal resistance junction-to-ambient RJA 24.3 27 29.7 °C/W Junction-to-Ambient 11
VCC5 supply input voltage VCC5 4.75 5 5.25 V 12
VCC5 supply input voltage for digital part VCC5_DIGITAL 4 5 5.25 V functional only 12
VCCIO supply input voltage VCCIO 3 5.25 V 12
VBATT power supply input voltage, normal operation VBATT 9 13.5 16 V Internal VCCP regulator, Normal operation 12
VBATT power supply input voltage, broken alternator regulator condition VBATT_BR 16 18 V Internal VCCP regulator; Duration < 1.0 hour 12
VBATT power supply input voltage, cranking condition VBATT_CRANK 5 9 V Internal or external VCCP regulator, Cranking condition 12
VBATT power supply input voltage, load dump VBATT_LOADDUMP 18 40 V Internal VCCP regulator; Duration < 500 ms 12
VBATT power supply input voltage, external VCCP normal operation VBATT_EXT 9 32 V External VCCP regulator, Normal operation 12
Boost output voltage VBOOST 5 V 12
VCC5 supply current IVCC5 46 51 mA fSYS = 24 MHz, no microcore running 13
VCC5 supply current IVCC5 51 56 mA fSYS = 24 MHz, all microcores running 13
VCCIO supply current IVCCIO 45 70 µA fSYS = 24 MHz, no microcore running 13
VBATT quiescent current in reset state IVBATT_QUIESC 180 µA VCC5 = VCCIO = 0.0 V; VBATT = 13.5 V 13
VBATT quiescent current in reset state IVBATT_QUIESC 800 µA VCC5 = VCCIO = 0.0 V; VBATT = 40 V 13
VBATT current in normal operation IVBATT_OPER 1.7 2.5 mA VBATT = 16 V; DRVEN low, internal VCCP reg. off 13
VBATT current in normal operation IVBATT_OPER 4.4 6 mA VBATT = 16 V; DRVEN low, internal VCCP reg. on 13
VBATT current in normal operation IVBATT_OPER 69.7 71 mA VBATT = 16 V; DRVEN high, VCCP max load 65 mA 13
Boost supply current in reset state IVBOOST_QUIESC 40 65 µA VCC5 = VCCIO = 0 V; VBOOST = 13.5 V 13
Boost supply current in reset state IVBOOST_QUIESC 150 280 µA VCC5 = VCCIO = 0 V; VBOOST = 40 V 13
Boost supply current in reset state IVBOOST_QUIESC 250 450 µA VCC5 = VCCIO = 0 V; VBOOST = 65 V 13
Boost supply current in normal operation IVBOOST_OPER 4.2 4.85 mA VBOOST = 16 V 13
Boost supply current in normal operation IVBOOST_OPER 4.55 5.35 mA VBOOST = 48 V 13
Boost supply current in normal operation IVBOOST_OPER 4.9 5.75 mA VBOOST = 65 V 13
2.5 V reference voltage for DACs VREF2.5 2.475 2.5 2.525 V 18
Minimum VCC5 voltage for bandgap operating VCC5_BGMIN 3.8 V 18
VCC2P5 supply output voltage VCC2P5 2.375 2.5 2.625 V 20
VCC2P5 supply output current IVCC2P5 -15 -25 mA fSYS = 24 MHz, all microcores running 20
VCC2P5 supply output current limit IVCC2P5_LIM -50 -70 -90 mA 20
VCC5 - VCC2P5 voltage dropout VVCC5 1.7 V VCC5 = 4.0 V and IVCC2P5 = -25 mA 20
VCC2P5 voltage threshold for asserting POResetB VPORESETB- 2 2.11 2.21 V 20
VCC2P5 voltage threshold for deasserting PORsetB VPORESETB+ 2.07 2.19 2.3 V 20
VCC5 overvoltage threshold VOVVCC5 7.5 8.5 10 V 21
VCC5 overvoltage threshold for VCCP shutdown VOVVCC5_VCCP 6.2 6.9 7.5 V 21
VCC5 undervoltage low-voltage threshold VUVVCC5- 4.3 4.45 4.7 V 21
VCC5 undervoltage high-voltage threshold VUVVCC5+ 4.35 4.5 4.75 V 21
VCCP output voltage VCCP 6.5 7 7.5 V 0.0 mA < IVCCP < 65 mA 23
VCCP output current limitation IVCCP_MAX -100 -150 -200 mA 23

CAD (KiCad official)

  • Symbol: MC33816AER2
  • Footprint: Package_QFP:LQFP-64_10x10mm_P0.5mm
  • 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
  • 3D model files: mc33816aer2-etched.step / mc33816aer2-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mc33816aer2.step / mc33816aer2.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (314 pp, sha256 90f4549277c23649, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF