Generated by kicad-footprint-generator · KiCad file format 20260206
MC33816AER2
NXP Semicon · Power Management Specialized - PMIC · LQFP-64(10x10)
MC33816AER2 from NXP Semicon, in a LQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CLK | input | External clock pin with an internal weak pull-up of typically 480 kΩ to VCCIO. |
| 2 | DRVEN | input | Driver enable pin with an internal weak pull-down of typically 480 kΩ to AGND. |
| 3 | RESETB | input | Device reset pin with an internal weak pull-up of typically 480 kΩ to VCCIO. |
| 4 | START1 | bidirectional | Trigger pin actuator 1 and Flag_bus(3) with an internal configurable pull-up or pull-down of typically 120 kΩ. |
| 5 | START2 | bidirectional | Trigger pin actuator 2 and Flag_bus(4) with an internal configurable pull-up or pull-down of typically 120 kΩ. |
| 6 | START3 | bidirectional | Trigger pin actuator 3 and Flag_bus(5) with an internal configurable pull-up or pull-down of typically 120 kΩ. |
| 7 | START4 | bidirectional | Trigger pin actuator 4 and Flag_bus(6) with an internal configurable pull-up or pull-down of typically 120 kΩ. |
| 8 | START5 | bidirectional | Trigger pin actuator 5 and Flag_bus(7) with an internal configurable pull-up or pull-down of typically 120 kΩ. |
| 9 | START6 | bidirectional | Trigger pin actuator 6 and Flag_bus(8) with an internal configurable pull-up or pull-down of typically 120 kΩ. |
| 10 | FLAG0 | bidirectional | General purpose I/O and Flag_bus(0) with an internal weak pull-down of typically 480 kΩ to AGND. |
| 11 | FLAG1 | bidirectional | General purpose I/O and Flag_bus(1) with an internal weak pull-down of typically 480 kΩ to AGND. |
| 12 | FLAG2 | bidirectional | General purpose I/O and Flag_bus(2) with an internal weak pull-down of typically 480 kΩ to AGND. |
| 13 | CSB | input | SPI chip select with an internal pull-up of typically 120 kΩ to VCCIO. |
| 14 | MOSI | input | SPI slave data input with an internal weak pull-up of typically 480 kΩ to VCCIO. |
| 15 | MISO | output | SPI slave data output. |
| 16 | SCLK | input | SPI clock input with an internal weak pull-up of typically 480 kΩ to VCCIO. |
| 17 | VCCIO | power_in | Digital I/O buffer supply rated for 3.3 V or 5.0 V, with a filtering capacitor required. |
| 18 | DBG | bidirectional | Debug pin and Flag_bus(12) with an internal weak pull-up of typically 480 kΩ to VCCIO. |
| 19 | DGND | power_in | Digital ground that must be connected to ground. |
| 20 | VCC2P5 | power_out | Internal 2.5 V digital power supply output that requires a decoupling capacitor. |
| 21 | VCC5 | power_in | Power supply input pin rated at 5.0 V with a filtering capacitor required; the battery voltage range is 5.0 V < VBATT < 32 V. |
| 22 | OA_1 | output | Current sense analog output and Flag_bus(10) with an internal weak pull-down of typically 480 kΩ to AGND. |
| 23 | OA_2 | output | Current sense analog output and Flag_bus(11) with an internal weak pull-down of typically 480 kΩ to AGND. |
| 24 | AGND | power_in | Analog ground that must be connected to ground. |
| 25 | VSENSEN1 | input | Current sense input comparator negative input for channel 1. |
| 26 | VSENSEP1 | input | Current sense input comparator positive input for channel 1. |
| 27 | VSENSEN2 | input | Current sense input comparator negative input for channel 2. |
| 28 | VSENSEP2 | input | Current sense input comparator positive input for channel 2. |
| 29 | VSENSEN3 | input | Current sense input comparator negative input for channel 3. |
| 30 | VSENSEP3 | input | Current sense input comparator positive input for channel 3. |
| 31 | VSENSEN4 | input | DC-DC current sense input comparator negative input. |
| 32 | VSENSEP4 | input | DC-DC current sense input comparator positive input. |
| 33 | D_LS6 | input | Low-side MOSFET drain pin monitor 6, rated -3.0 V to 75 V nominal. |
| 34 | D_LS5 | input | Low-side MOSFET drain pin monitor 5, rated -3.0 V to 75 V nominal. |
| 35 | D_LS4 | input | Low-side MOSFET drain pin monitor 4, rated -3.0 V to 75 V nominal. |
| 36 | D_LS3 | input | Low-side MOSFET drain pin monitor 3, rated -3.0 V to 75 V nominal. |
| 37 | D_LS2 | input | Low-side MOSFET drain pin monitor 2, rated -3.0 V to 75 V nominal. |
| 38 | D_LS1 | input | Low-side MOSFET drain pin monitor 1, rated -3.0 V to 75 V nominal. |
| 39 | VBATT | power_in | Battery input voltage rated -0.3 V to 72 V, with the operating range 5.0 V < VBATT < 32 V. |
| 40 | VCCP | power_in | Internal 7.0 V power supply output or external 7.0 V power supply input, with a filtering capacitor required. |
| 41 | G_LS7 | output | DC-DC low-side MOSFET gate pin actuator 7. |
| 42 | G_LS6 | output | Low-side MOSFET gate pin actuator 6. |
| 43 | G_LS5 | output | Low-side MOSFET gate pin actuator 5. |
| 44 | G_LS4 | output | Low-side MOSFET gate pin actuator 4. |
| 45 | G_LS3 | output | Low-side MOSFET gate pin actuator 3. |
| 46 | G_LS2 | output | Low-side MOSFET gate pin actuator 2. |
| 47 | G_LS1 | output | Low-side MOSFET gate pin actuator 1. |
| 48 | VBOOST | input | DC-DC feedback pin and boost voltage monitor pin, rated 0.0 V to 72 V steady-state. |
| 49 | B_HS5 | passive | High-side MOSFET bootstrap pin 5. |
| 50 | G_HS5 | output | High-side MOSFET gate pin actuator 5. |
| 51 | S_HS5 | input | High-side MOSFET source pin monitor 5. |
| 52 | B_HS4 | passive | High-side MOSFET bootstrap pin 4. |
| 53 | G_HS4 | output | High-side MOSFET gate pin actuator 4. |
| 54 | S_HS4 | input | High-side MOSFET source pin monitor 4. |
| 55 | B_HS3 | passive | High-side MOSFET bootstrap pin 3. |
| 56 | G_HS3 | output | High-side MOSFET gate pin actuator 3. |
| 57 | S_HS3 | input | High-side MOSFET source pin monitor 3. |
| 58 | B_HS2 | passive | High-side MOSFET bootstrap pin 2. |
| 59 | G_HS2 | output | High-side MOSFET gate pin actuator 2. |
| 60 | S_HS2 | input | High-side MOSFET source pin monitor 2. |
| 61 | B_HS1 | passive | High-side MOSFET bootstrap pin 1. |
| 62 | G_HS1 | output | High-side MOSFET gate pin actuator 1. |
| 63 | S_HS1 | input | High-side MOSFET source pin monitor 1. |
| 64 | IRQB | bidirectional | Interrupt output and Flag_bus(9) with an internal weak pull-down of typically 480 kΩ to AGND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | LQFP-64(10x10) |
| Category | Power Supply Chip |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Battery voltage range | VBATT | -0.3 | 72 | V | 9 | ||
| VCC5 input pin | VCC5 | -0.3 | 18 | V | 9 | ||
| VCCIO input pin | VCCIO | -0.3 | 18 | V | 9 | ||
| VCCP input/output pin | VCCP | -0.3 | 9 | V | 9 | ||
| VCC2P5 output pin | VCC2P5 | -0.3 | 3 | V | 9 | ||
| SPI interface and logic input and output voltage | VMAX_LOGIC | -0.3 | 18 | V | 9 | ||
| VBOOST pin voltage range | VBOOSTMAX | 0 | 72 | V | Steady-state | 9 | |
| Drain low-side MOSFET pin | VD_LSX | -3 | 75 | V | Nominal | 9 | |
| Drain low-side MOSFET pin | VD_LSX | -8 | 75 | V | Transients t < 400 ns | 9 | |
| Current measurement positive input pin voltage (VSENSEP1, VSENSEP2, VSENSEP3) | VSENSEP | -2.5 | 2.5 | V | Static at VCC5 < 10 V | 10 | |
| Current measurement negative input pin voltage (VSENSEN1, VSENSEN2, VSENSEN3) | VSENSEN | -1 | 1 | V | Static at VCC5 < 10 V | 10 | |
| Current measurement four positive input pin voltage | VSENSEP4 | -4.2 | 2.5 | V | Static at VCC5 < 10 V | 10 | |
| Current measurement four negative input pin voltage | VSENSEN4 | -3 | 1 | V | Static at VCC5 < 10 V | 10 | |
| Ambient operating temperature | TA | -40 | 125 | °C | Ambient | 11 | |
| Junction operating temperature | TJ | -40 | 150 | °C | Junction | 11 | |
| Storage temperature | TSTG | -40 | 150 | °C | 11 | ||
| Thermal resistance junction-to-ambient | RJA | 24.3 | 27 | 29.7 | °C/W | Junction-to-Ambient | 11 |
| VCC5 supply input voltage | VCC5 | 4.75 | 5 | 5.25 | V | 12 | |
| VCC5 supply input voltage for digital part | VCC5_DIGITAL | 4 | 5 | 5.25 | V | functional only | 12 |
| VCCIO supply input voltage | VCCIO | 3 | 5.25 | V | 12 | ||
| VBATT power supply input voltage, normal operation | VBATT | 9 | 13.5 | 16 | V | Internal VCCP regulator, Normal operation | 12 |
| VBATT power supply input voltage, broken alternator regulator condition | VBATT_BR | 16 | 18 | V | Internal VCCP regulator; Duration < 1.0 hour | 12 | |
| VBATT power supply input voltage, cranking condition | VBATT_CRANK | 5 | 9 | V | Internal or external VCCP regulator, Cranking condition | 12 | |
| VBATT power supply input voltage, load dump | VBATT_LOADDUMP | 18 | 40 | V | Internal VCCP regulator; Duration < 500 ms | 12 | |
| VBATT power supply input voltage, external VCCP normal operation | VBATT_EXT | 9 | 32 | V | External VCCP regulator, Normal operation | 12 | |
| Boost output voltage | VBOOST | 5 | V | 12 | |||
| VCC5 supply current | IVCC5 | 46 | 51 | mA | fSYS = 24 MHz, no microcore running | 13 | |
| VCC5 supply current | IVCC5 | 51 | 56 | mA | fSYS = 24 MHz, all microcores running | 13 | |
| VCCIO supply current | IVCCIO | 45 | 70 | µA | fSYS = 24 MHz, no microcore running | 13 | |
| VBATT quiescent current in reset state | IVBATT_QUIESC | 180 | µA | VCC5 = VCCIO = 0.0 V; VBATT = 13.5 V | 13 | ||
| VBATT quiescent current in reset state | IVBATT_QUIESC | 800 | µA | VCC5 = VCCIO = 0.0 V; VBATT = 40 V | 13 | ||
| VBATT current in normal operation | IVBATT_OPER | 1.7 | 2.5 | mA | VBATT = 16 V; DRVEN low, internal VCCP reg. off | 13 | |
| VBATT current in normal operation | IVBATT_OPER | 4.4 | 6 | mA | VBATT = 16 V; DRVEN low, internal VCCP reg. on | 13 | |
| VBATT current in normal operation | IVBATT_OPER | 69.7 | 71 | mA | VBATT = 16 V; DRVEN high, VCCP max load 65 mA | 13 | |
| Boost supply current in reset state | IVBOOST_QUIESC | 40 | 65 | µA | VCC5 = VCCIO = 0 V; VBOOST = 13.5 V | 13 | |
| Boost supply current in reset state | IVBOOST_QUIESC | 150 | 280 | µA | VCC5 = VCCIO = 0 V; VBOOST = 40 V | 13 | |
| Boost supply current in reset state | IVBOOST_QUIESC | 250 | 450 | µA | VCC5 = VCCIO = 0 V; VBOOST = 65 V | 13 | |
| Boost supply current in normal operation | IVBOOST_OPER | 4.2 | 4.85 | mA | VBOOST = 16 V | 13 | |
| Boost supply current in normal operation | IVBOOST_OPER | 4.55 | 5.35 | mA | VBOOST = 48 V | 13 | |
| Boost supply current in normal operation | IVBOOST_OPER | 4.9 | 5.75 | mA | VBOOST = 65 V | 13 | |
| 2.5 V reference voltage for DACs | VREF2.5 | 2.475 | 2.5 | 2.525 | V | 18 | |
| Minimum VCC5 voltage for bandgap operating | VCC5_BGMIN | 3.8 | V | 18 | |||
| VCC2P5 supply output voltage | VCC2P5 | 2.375 | 2.5 | 2.625 | V | 20 | |
| VCC2P5 supply output current | IVCC2P5 | -15 | -25 | mA | fSYS = 24 MHz, all microcores running | 20 | |
| VCC2P5 supply output current limit | IVCC2P5_LIM | -50 | -70 | -90 | mA | 20 | |
| VCC5 - VCC2P5 voltage dropout | VVCC5 | 1.7 | V | VCC5 = 4.0 V and IVCC2P5 = -25 mA | 20 | ||
| VCC2P5 voltage threshold for asserting POResetB | VPORESETB- | 2 | 2.11 | 2.21 | V | 20 | |
| VCC2P5 voltage threshold for deasserting PORsetB | VPORESETB+ | 2.07 | 2.19 | 2.3 | V | 20 | |
| VCC5 overvoltage threshold | VOVVCC5 | 7.5 | 8.5 | 10 | V | 21 | |
| VCC5 overvoltage threshold for VCCP shutdown | VOVVCC5_VCCP | 6.2 | 6.9 | 7.5 | V | 21 | |
| VCC5 undervoltage low-voltage threshold | VUVVCC5- | 4.3 | 4.45 | 4.7 | V | 21 | |
| VCC5 undervoltage high-voltage threshold | VUVVCC5+ | 4.35 | 4.5 | 4.75 | V | 21 | |
| VCCP output voltage | VCCP | 6.5 | 7 | 7.5 | V | 0.0 mA < IVCCP < 65 mA | 23 |
| VCCP output current limitation | IVCCP_MAX | -100 | -150 | -200 | mA | 23 |
CAD (KiCad official)
- Symbol:
MC33816AER2 - Footprint:
Package_QFP:LQFP-64_10x10mm_P0.5mm - 3D model: LQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
mc33816aer2-etched.step/mc33816aer2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mc33816aer2.step/mc33816aer2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (314 pp, sha256
90f4549277c23649, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).