3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSTM32L072KBU3
STMicroelectronics · ST Microelectronics · UFQFPN-32(5x5)
STM32L072KBU3 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PC14-OSC32_IN | bidirectional | 5 V tolerant (FT) I/O that is also the OSC32_IN input of the 32.768 kHz low-speed oscillator; floating input during and after reset unless otherwise noted. |
| 2 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V (TC) I/O that is also the OSC32_OUT output of the 32.768 kHz low-speed oscillator. |
| 3 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 4 | VSSA | power_in | Analog ground pin. |
| 5 | VDDA | power_in | Analog power supply pin. |
| 6 | PA0 | bidirectional | I/O with structure TT (not defined in the datasheet legend); alternate functions include TIM2_CH1, TSC_G1_IO1, USART2_CTS, USART4_TX and COMP1_OUT, additional functions ADC_IN0, COMP1_INM and RTC_TAMP2/WKUP1. |
| 7 | PA1 | bidirectional | 5 V tolerant (FT) I/O; alternate functions include EVENTOUT, TIM2_CH2, TSC_G1_IO2, USART2_RTS/USART2_DE, TIM21_ETR and USART4_RX, additional functions ADC_IN1 and COMP1_INP. |
| 8 | PA2 | bidirectional | 5 V tolerant (FT) I/O; alternate functions include TIM21_CH1, TIM2_CH3, TSC_G1_IO3, USART2_TX, LPUART1_TX and COMP2_OUT, additional functions ADC_IN2 and COMP2_INM. |
| 9 | PA3 | bidirectional | 5 V tolerant (FT) I/O; alternate functions include TIM21_CH2, TIM2_CH4, TSC_G1_IO4, USART2_RX and LPUART1_RX, additional functions ADC_IN3 and COMP2_INP. |
| 10 | PA4 | bidirectional | Standard 3.3 V (TC) I/O with reduced touch sensing sensitivity, so it is recommended to use it as a sampling capacitor I/O; alternate functions include SPI1_NSS, TSC_G2_IO1, USART2_CK and TIM22_ETR, additional functions ADC_IN4, DAC_OUT1, COMP1_INM and COMP2_INM. |
| 11 | PA5 | bidirectional | Standard 3.3 V (TC) I/O; alternate functions include SPI1_SCK, TIM2_ETR, TSC_G2_IO2 and TIM2_CH1, additional functions ADC_IN5, DAC_OUT2, COMP1_INM and COMP2_INM. |
| 12 | PA6 | bidirectional | 5 V tolerant (FT) I/O; alternate functions include SPI1_MISO, TIM3_CH1, TSC_G2_IO3, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT, additional function ADC_IN6. |
| 13 | PA7 | bidirectional | 5 V tolerant (FT) I/O; alternate functions include SPI1_MOSI, TIM3_CH2, TSC_G2_IO4, TIM22_CH2, EVENTOUT and COMP2_OUT, additional function ADC_IN7. |
| 14 | PB0 | bidirectional | 5 V tolerant (FT) I/O; alternate functions include EVENTOUT, TIM3_CH3 and TSC_G3_IO2, additional functions ADC_IN8 and VREF_OUT. |
| 15 | PB1 | bidirectional | 5 V tolerant (FT) I/O; alternate functions include TIM3_CH4, TSC_G3_IO3 and LPUART1_RTS/LPUART1_DE, additional functions ADC_IN9 and VREF_OUT. |
| 16 | VSS | power_in | Ground pin. |
| 17 | VDD | power_in | Main power supply pin. |
| 18 | PA8 | bidirectional | 5 V tolerant, Fast Mode Plus capable (FTf) I/O; alternate functions include MCO, USB_CRS_SYNC, EVENTOUT, USART1_CK and I2C3_SCL. |
| 19 | PA9 | bidirectional | 5 V tolerant, Fast Mode Plus capable (FTf) I/O; alternate functions include MCO, TSC_G4_IO1, USART1_TX, I2C1_SCL and I2C3_SMBA. |
| 20 | PA10 | bidirectional | 5 V tolerant, Fast Mode Plus capable (FTf) I/O; alternate functions include TSC_G4_IO2, USART1_RX and I2C1_SDA. |
| 21 | PA11 | bidirectional | 5 V tolerant (FT) I/O powered by VDD_USB; alternate functions include SPI1_MISO, EVENTOUT, TSC_G4_IO3, USART1_CTS and COMP1_OUT, additional function USB_DM. |
| 22 | PA12 | bidirectional | 5 V tolerant (FT) I/O powered by VDD_USB; alternate functions include SPI1_MOSI, EVENTOUT, TSC_G4_IO4, USART1_RTS/USART1_DE and COMP2_OUT, additional function USB_DP. |
| 23 | PA13 | bidirectional | 5 V tolerant (FT) I/O; alternate functions include SWDIO, USB_NOE and LPUART1_RX. |
| 24 | VDD_USB | power_in | Power supply for the USB-related I/Os PA11 and PA12; for characteristics referring to VDD, VDD_USB must be used for these pins. |
| 25 | PA14 | bidirectional | 5 V tolerant (FT) I/O; alternate functions include SWCLK, USART2_TX and LPUART1_TX. |
| 26 | PB4 | bidirectional | 5 V tolerant, Fast Mode Plus capable (FTf) I/O; alternate functions include SPI1_MISO, TIM3_CH1, TSC_G5_IO2, TIM22_CH1, USART1_CTS, USART5_RX and I2C3_SDA, additional function COMP2_INP. |
| 27 | PB5 | bidirectional | 5 V tolerant (FT) I/O; alternate functions include SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA, TIM3_CH2/TIM22_CH2, USART1_CK, USART5_CK and USART5_RTS/USART5_DE, additional function COMP2_INP. |
| 28 | PB6 | bidirectional | 5 V tolerant, Fast Mode Plus capable (FTf) I/O; alternate functions include USART1_TX, I2C1_SCL, LPTIM1_ETR and TSC_G5_IO3, additional function COMP2_INP. |
| 29 | PB7 | bidirectional | 5 V tolerant, Fast Mode Plus capable (FTf) I/O; alternate functions include USART1_RX, I2C1_SDA, LPTIM1_IN2, TSC_G5_IO4 and USART4_CTS, additional functions COMP2_INP and VREF_PVD_IN. |
| 30 | BOOT0 | input | Dedicated BOOT0 pin (legend abbreviation B); input only. |
| 31 | VSS | power_in | Ground pin. |
| 32 | VDD | power_in | Main power supply pin. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-32(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD-VSS (external main supply, incl. VDDA, VDD_USB, VDD) | VDD-VSS | -0.3 | 4 | V | 62 | ||
| Input voltage on FT and FTf pins | VIN | -0.3 | V | min = VSS − 0.3; max = VDD + 4.0 (VDD-relative, printed as VDD+4.0) | 62 | ||
| Input voltage on TC pins | VIN | -0.3 | 4 | V | min = VSS − 0.3 | 62 | |
| Input voltage on BOOT0 pin | VIN | 0 | V | min = VSS; max = VDD + 4.0 (VDD-relative, printed as VDD+4.0) | 62 | ||
| Input voltage on any other pin | VIN | -0.3 | 4 | V | 62 | ||
| Variations between different VDDx power pins | /ΔVDD/ | 50 | mV | 62 | |||
| Variations between any VDDx and VDDA power pins | /VDDA-VDDx/ | 300 | mV | Recommended same source; max difference tolerated during power-up and operation | 62 | ||
| Variations between all different ground pins including VREF- pin | /ΔVSS/ | 50 | mV | 62 | |||
| Allowed voltage difference for VREF+ > VDDA | VREF+ − VDDA | 0.4 | V | VREF+ > VDDA | 62 | ||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 105 | mA | 63 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | 105 | mA | 63 | |||
| Total current into VDD_USB power lines (source) | ΣIVDD_USB | 25 | mA | 63 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 63 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | 63 | |||
| Output current sunk by any I/O and control pin except FTf pins | IIO | 16 | mA | 63 | |||
| Output current sunk by FTf pins | IIO | 22 | mA | FTf pins | 63 | ||
| Output current sourced by any I/O and control pin | IIO | -16 | mA | sourced | 63 | ||
| Total output current sunk by sum of all IOs and control pins except PA11 and PA12 | ΣIIO(PIN) | 90 | mA | 63 | |||
| Total output current sunk by PA11 and PA12 | ΣIIO(PIN) | 25 | mA | PA11 and PA12 | 63 | ||
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | -90 | mA | sourced | 63 | ||
| Injected current on FT, FTf, RST and B pins | IINJ(PIN) | -5 | 0 | mA | printed −5/+0; positive injection not possible on these I/Os | 63 | |
| Injected current on TC pin | IINJ(PIN) | -5 | 5 | mA | ±5 | 63 | |
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | ±25 | 63 | |
| Storage temperature range | TSTG | -65 | 150 | °C | 63 | ||
| Maximum junction temperature | TJ | 150 | °C | 63 | |||
| Internal AHB clock frequency | fHCLK | 0 | 32 | MHz | 64 | ||
| Internal APB1 clock frequency | fPCLK1 | 0 | 32 | MHz | 64 | ||
| Internal APB2 clock frequency | fPCLK2 | 0 | 32 | MHz | 64 | ||
| Standard operating voltage | VDD | 1.65 | 3.6 | V | BOR detector disabled | 64 | |
| Standard operating voltage | VDD | 1.8 | 3.6 | V | BOR detector enabled, at power-on | 64 | |
| Analog operating voltage (DAC not used) | VDDA | 1.65 | 3.6 | V | DAC not used; must be the same voltage as VDD | 64 | |
| Analog operating voltage (all features) | VDDA | 1.8 | 3.6 | V | All features; must be the same voltage as VDD | 64 | |
| Standard operating voltage, USB domain | VDD_USB | 3 | 3.6 | V | USB peripheral used | 64 | |
| Standard operating voltage, USB domain | VDD_USB | 0 | 3.6 | V | USB peripheral not used | 64 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.5 | V | 2.0 V ≤ VDD ≤ 3.6 V | 64 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.2 | V | 1.65 V ≤ VDD ≤ 2.0 V | 64 | |
| Input voltage on BOOT0 pin | VIN | 0 | 5.5 | V | 64 | ||
| Input voltage on TC pin | VIN | -0.3 | V | max = VDD + 0.3 (VDD-relative, printed as VDD+0.3) | 64 | ||
| Power dissipation at TA = 85 °C (range 6) or TA = 105 °C (range 7), UFQFPN32 package | PD | 556 | mW | UFQFPN32 package; range 6 at 85 °C or range 7 at 105 °C | 65 | ||
| Power dissipation at TA = 125 °C (range 3), UFQFPN32 package | PD | 139 | mW | UFQFPN32 package; range 3 | 65 | ||
| Maximum power dissipation temperature range (range 6) | TA | -40 | 85 | °C | range 6 | 65 | |
| Maximum power dissipation temperature range (range 7) | TA | -40 | 105 | °C | range 7 | 65 | |
| Maximum power dissipation temperature range (range 3) | TA | -40 | 125 | °C | range 3 | 65 | |
| Junction temperature range (range 6) | TJ | -40 | 105 | °C | −40 °C ≤ TA ≤ 85 °C; range 6 | 65 | |
| Junction temperature range (range 7) | TJ | -40 | 125 | °C | −40 °C ≤ TA ≤ 105 °C; range 7 | 65 | |
| Junction temperature range (range 3) | TJ | -40 | 130 | °C | −40 °C ≤ TA ≤ 125 °C; range 3 | 65 | |
| Power-on/power down reset threshold | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 66 |
| Power-on/power down reset threshold | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 66 |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | −40 °C < TJ < +125 °C | 67 |
| Supply current in Standby mode | IDD (Standby) | 2.6 | 7 | µA | Independent watchdog and LSI OFF; TA = 125 °C | 77 | |
| HSI16 accuracy of factory-calibrated oscillator | ACCHSI16 | -5.45 | 3.25 | % | VDDA = 1.65 V to 3.6 V, TA = −40 to 125 °C | 87 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
STM32L072KBU3 - Footprint:
Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm - 3D model: UFQFPN-32(5x5), generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stm32l072kbu3-etched.step/stm32l072kbu3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l072kbu3.step/stm32l072kbu3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (160 pp, sha256
13ea53054244ac9d, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).