main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers stm32l072kbu3: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
stm32l072kbu3-etched.glb stm32l072kbu3: factory component page (tier=mfr) · Ray
stm32l072kbu3-etched.step stm32l072kbu3: factory component page (tier=mfr) · Ray
stm32l072kbu3-hero.glb stm32l072kbu3: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32l072kbu3-hero.overlay.json stm32l072kbu3: hero GLB from the etched model (keeps the MPN mark) · Ray
stm32l072kbu3.glb Publish 0.1.0 · Ray
stm32l072kbu3.kicad_mod Publish 0.1.0 · Ray
stm32l072kbu3.kicad_sym Publish 0.1.0 · Ray
stm32l072kbu3.lbr Publish 0.1.0 · Ray
stm32l072kbu3.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 33 pins · Ray

STM32L072KBU3

STMicroelectronics · ST Microelectronics · UFQFPN-32(5x5)

STM32L072KBU3 from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 PC14-OSC32_IN bidirectional 5 V tolerant (FT) I/O that is also the OSC32_IN input of the 32.768 kHz low-speed oscillator; floating input during and after reset unless otherwise noted.
2 PC15-OSC32_OUT bidirectional Standard 3.3 V (TC) I/O that is also the OSC32_OUT output of the 32.768 kHz low-speed oscillator.
3 NRST bidirectional Bidirectional reset pin with embedded weak pull-up resistor.
4 VSSA power_in Analog ground pin.
5 VDDA power_in Analog power supply pin.
6 PA0 bidirectional I/O with structure TT (not defined in the datasheet legend); alternate functions include TIM2_CH1, TSC_G1_IO1, USART2_CTS, USART4_TX and COMP1_OUT, additional functions ADC_IN0, COMP1_INM and RTC_TAMP2/WKUP1.
7 PA1 bidirectional 5 V tolerant (FT) I/O; alternate functions include EVENTOUT, TIM2_CH2, TSC_G1_IO2, USART2_RTS/USART2_DE, TIM21_ETR and USART4_RX, additional functions ADC_IN1 and COMP1_INP.
8 PA2 bidirectional 5 V tolerant (FT) I/O; alternate functions include TIM21_CH1, TIM2_CH3, TSC_G1_IO3, USART2_TX, LPUART1_TX and COMP2_OUT, additional functions ADC_IN2 and COMP2_INM.
9 PA3 bidirectional 5 V tolerant (FT) I/O; alternate functions include TIM21_CH2, TIM2_CH4, TSC_G1_IO4, USART2_RX and LPUART1_RX, additional functions ADC_IN3 and COMP2_INP.
10 PA4 bidirectional Standard 3.3 V (TC) I/O with reduced touch sensing sensitivity, so it is recommended to use it as a sampling capacitor I/O; alternate functions include SPI1_NSS, TSC_G2_IO1, USART2_CK and TIM22_ETR, additional functions ADC_IN4, DAC_OUT1, COMP1_INM and COMP2_INM.
11 PA5 bidirectional Standard 3.3 V (TC) I/O; alternate functions include SPI1_SCK, TIM2_ETR, TSC_G2_IO2 and TIM2_CH1, additional functions ADC_IN5, DAC_OUT2, COMP1_INM and COMP2_INM.
12 PA6 bidirectional 5 V tolerant (FT) I/O; alternate functions include SPI1_MISO, TIM3_CH1, TSC_G2_IO3, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT, additional function ADC_IN6.
13 PA7 bidirectional 5 V tolerant (FT) I/O; alternate functions include SPI1_MOSI, TIM3_CH2, TSC_G2_IO4, TIM22_CH2, EVENTOUT and COMP2_OUT, additional function ADC_IN7.
14 PB0 bidirectional 5 V tolerant (FT) I/O; alternate functions include EVENTOUT, TIM3_CH3 and TSC_G3_IO2, additional functions ADC_IN8 and VREF_OUT.
15 PB1 bidirectional 5 V tolerant (FT) I/O; alternate functions include TIM3_CH4, TSC_G3_IO3 and LPUART1_RTS/LPUART1_DE, additional functions ADC_IN9 and VREF_OUT.
16 VSS power_in Ground pin.
17 VDD power_in Main power supply pin.
18 PA8 bidirectional 5 V tolerant, Fast Mode Plus capable (FTf) I/O; alternate functions include MCO, USB_CRS_SYNC, EVENTOUT, USART1_CK and I2C3_SCL.
19 PA9 bidirectional 5 V tolerant, Fast Mode Plus capable (FTf) I/O; alternate functions include MCO, TSC_G4_IO1, USART1_TX, I2C1_SCL and I2C3_SMBA.
20 PA10 bidirectional 5 V tolerant, Fast Mode Plus capable (FTf) I/O; alternate functions include TSC_G4_IO2, USART1_RX and I2C1_SDA.
21 PA11 bidirectional 5 V tolerant (FT) I/O powered by VDD_USB; alternate functions include SPI1_MISO, EVENTOUT, TSC_G4_IO3, USART1_CTS and COMP1_OUT, additional function USB_DM.
22 PA12 bidirectional 5 V tolerant (FT) I/O powered by VDD_USB; alternate functions include SPI1_MOSI, EVENTOUT, TSC_G4_IO4, USART1_RTS/USART1_DE and COMP2_OUT, additional function USB_DP.
23 PA13 bidirectional 5 V tolerant (FT) I/O; alternate functions include SWDIO, USB_NOE and LPUART1_RX.
24 VDD_USB power_in Power supply for the USB-related I/Os PA11 and PA12; for characteristics referring to VDD, VDD_USB must be used for these pins.
25 PA14 bidirectional 5 V tolerant (FT) I/O; alternate functions include SWCLK, USART2_TX and LPUART1_TX.
26 PB4 bidirectional 5 V tolerant, Fast Mode Plus capable (FTf) I/O; alternate functions include SPI1_MISO, TIM3_CH1, TSC_G5_IO2, TIM22_CH1, USART1_CTS, USART5_RX and I2C3_SDA, additional function COMP2_INP.
27 PB5 bidirectional 5 V tolerant (FT) I/O; alternate functions include SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA, TIM3_CH2/TIM22_CH2, USART1_CK, USART5_CK and USART5_RTS/USART5_DE, additional function COMP2_INP.
28 PB6 bidirectional 5 V tolerant, Fast Mode Plus capable (FTf) I/O; alternate functions include USART1_TX, I2C1_SCL, LPTIM1_ETR and TSC_G5_IO3, additional function COMP2_INP.
29 PB7 bidirectional 5 V tolerant, Fast Mode Plus capable (FTf) I/O; alternate functions include USART1_RX, I2C1_SDA, LPTIM1_IN2, TSC_G5_IO4 and USART4_CTS, additional functions COMP2_INP and VREF_PVD_IN.
30 BOOT0 input Dedicated BOOT0 pin (legend abbreviation B); input only.
31 VSS power_in Ground pin.
32 VDD power_in Main power supply pin.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UFQFPN-32(5x5)
Category Embedded Processors & Controllers
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD-VSS (external main supply, incl. VDDA, VDD_USB, VDD) VDD-VSS -0.3 4 V 62
Input voltage on FT and FTf pins VIN -0.3 V min = VSS − 0.3; max = VDD + 4.0 (VDD-relative, printed as VDD+4.0) 62
Input voltage on TC pins VIN -0.3 4 V min = VSS − 0.3 62
Input voltage on BOOT0 pin VIN 0 V min = VSS; max = VDD + 4.0 (VDD-relative, printed as VDD+4.0) 62
Input voltage on any other pin VIN -0.3 4 V 62
Variations between different VDDx power pins /ΔVDD/ 50 mV 62
Variations between any VDDx and VDDA power pins /VDDA-VDDx/ 300 mV Recommended same source; max difference tolerated during power-up and operation 62
Variations between all different ground pins including VREF- pin /ΔVSS/ 50 mV 62
Allowed voltage difference for VREF+ > VDDA VREF+ − VDDA 0.4 V VREF+ > VDDA 62
Total current into sum of all VDD power lines (source) ΣIVDD 105 mA 63
Total current out of sum of all VSS ground lines (sink) ΣIVSS 105 mA 63
Total current into VDD_USB power lines (source) ΣIVDD_USB 25 mA 63
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA 63
Maximum current out of each VSS ground pin (sink) IVSS(PIN) 100 mA 63
Output current sunk by any I/O and control pin except FTf pins IIO 16 mA 63
Output current sunk by FTf pins IIO 22 mA FTf pins 63
Output current sourced by any I/O and control pin IIO -16 mA sourced 63
Total output current sunk by sum of all IOs and control pins except PA11 and PA12 ΣIIO(PIN) 90 mA 63
Total output current sunk by PA11 and PA12 ΣIIO(PIN) 25 mA PA11 and PA12 63
Total output current sourced by sum of all IOs and control pins ΣIIO(PIN) -90 mA sourced 63
Injected current on FT, FTf, RST and B pins IINJ(PIN) -5 0 mA printed −5/+0; positive injection not possible on these I/Os 63
Injected current on TC pin IINJ(PIN) -5 5 mA ±5 63
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA ±25 63
Storage temperature range TSTG -65 150 °C 63
Maximum junction temperature TJ 150 °C 63
Internal AHB clock frequency fHCLK 0 32 MHz 64
Internal APB1 clock frequency fPCLK1 0 32 MHz 64
Internal APB2 clock frequency fPCLK2 0 32 MHz 64
Standard operating voltage VDD 1.65 3.6 V BOR detector disabled 64
Standard operating voltage VDD 1.8 3.6 V BOR detector enabled, at power-on 64
Analog operating voltage (DAC not used) VDDA 1.65 3.6 V DAC not used; must be the same voltage as VDD 64
Analog operating voltage (all features) VDDA 1.8 3.6 V All features; must be the same voltage as VDD 64
Standard operating voltage, USB domain VDD_USB 3 3.6 V USB peripheral used 64
Standard operating voltage, USB domain VDD_USB 0 3.6 V USB peripheral not used 64
Input voltage on FT, FTf and RST pins VIN -0.3 5.5 V 2.0 V ≤ VDD ≤ 3.6 V 64
Input voltage on FT, FTf and RST pins VIN -0.3 5.2 V 1.65 V ≤ VDD ≤ 2.0 V 64
Input voltage on BOOT0 pin VIN 0 5.5 V 64
Input voltage on TC pin VIN -0.3 V max = VDD + 0.3 (VDD-relative, printed as VDD+0.3) 64
Power dissipation at TA = 85 °C (range 6) or TA = 105 °C (range 7), UFQFPN32 package PD 556 mW UFQFPN32 package; range 6 at 85 °C or range 7 at 105 °C 65
Power dissipation at TA = 125 °C (range 3), UFQFPN32 package PD 139 mW UFQFPN32 package; range 3 65
Maximum power dissipation temperature range (range 6) TA -40 85 °C range 6 65
Maximum power dissipation temperature range (range 7) TA -40 105 °C range 7 65
Maximum power dissipation temperature range (range 3) TA -40 125 °C range 3 65
Junction temperature range (range 6) TJ -40 105 °C −40 °C ≤ TA ≤ 85 °C; range 6 65
Junction temperature range (range 7) TJ -40 125 °C −40 °C ≤ TA ≤ 105 °C; range 7 65
Junction temperature range (range 3) TJ -40 130 °C −40 °C ≤ TA ≤ 125 °C; range 3 65
Power-on/power down reset threshold VPOR/PDR 1 1.5 1.65 V Falling edge 66
Power-on/power down reset threshold VPOR/PDR 1.3 1.5 1.65 V Rising edge 66
Internal reference voltage VREFINT out 1.202 1.224 1.242 V −40 °C < TJ < +125 °C 67
Supply current in Standby mode IDD (Standby) 2.6 7 µA Independent watchdog and LSI OFF; TA = 125 °C 77
HSI16 accuracy of factory-calibrated oscillator ACCHSI16 -5.45 3.25 % VDDA = 1.65 V to 3.6 V, TA = −40 to 125 °C 87

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: STM32L072KBU3
  • Footprint: Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm
  • 3D model: UFQFPN-32(5x5), generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: stm32l072kbu3-etched.step / stm32l072kbu3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l072kbu3.step / stm32l072kbu3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (160 pp, sha256 13ea53054244ac9d, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF