Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MINI54FDE

Nuvoton Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20

MINI54FDE from Nuvoton Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P1.2 bidirectional General purpose digital I/O pin P1.2, shared with AIN2 (ADC analog input), RX (UART data receiver input) and ACMP0_P (analog comparator positive input).
2 P1.3 bidirectional General purpose digital I/O pin P1.3, shared with AIN3 (ADC analog input), TX (UART transmitter output) and ACMP0_P (analog comparator positive input).
3 P1.4 bidirectional General purpose digital I/O pin P1.4, shared with AIN4 (ADC analog input per the pin diagram) and ACMP0_N (analog comparator negative input).
4 P1.5 bidirectional General purpose digital I/O pin P1.5, shared with AIN5 (ADC analog input) and ACMP0_P (analog comparator positive input).
5 /RESET input Schmitt trigger input for hardware device reset; a low for 768 clock counts of the internal 22.1184 MHz RC while the system clock is running resets the device, and an internal pull-up allows power-on reset with just an external capacitor to GND.
6 P3.2 bidirectional General purpose digital I/O pin P3.2, shared with INT0 (external interrupt 0 input), STADC (ADC external trigger input), T0EX (Timer 0 external capture/reset trigger input) and ACMP1_P (analog comparator positive input).
7 P3.4 bidirectional General purpose digital I/O pin P3.4, shared with T0 (Timer 0 external event counter input), SDA (I2C data I/O) and ACMP1_P (analog comparator positive input).
8 P3.5 bidirectional General purpose digital I/O pin P3.5, shared with T1 (Timer 1 external event counter input), SCL (I2C clock I/O) and ACMP1_P (analog comparator positive input).
9 P5.1 bidirectional General purpose digital I/O pin P5.1, also XTAL2, the output of the internal inverting amplifier that emits the inverted signal of XTAL1.
10 P5.0 bidirectional General purpose digital I/O pin P5.0, also XTAL1, the input to the internal inverting amplifier; the system clock can come from an external crystal or resonator.
11 VSS power_in Ground pin for digital circuit.
12 P2.4 bidirectional General purpose digital I/O pin P2.4, shared with PWM2 (PWM unit output).
13 P2.5 bidirectional General purpose digital I/O pin P2.5, shared with PWM3 (PWM unit output).
14 P4.6 bidirectional General purpose digital I/O pin P4.6, shared with ICE_CLK (serial wired debugger clock input).
15 P4.7 bidirectional General purpose digital I/O pin P4.7, shared with ICE_DAT (serial wired debugger data I/O).
16 P0.7 bidirectional General purpose digital I/O pin P0.7, shared with SPICLK (SPI serial clock I/O).
17 P0.6 bidirectional General purpose digital I/O pin P0.6, shared with MISO (SPI master in/slave out I/O).
18 P0.5 bidirectional General purpose digital I/O pin P0.5, shared with MOSI (SPI master out/slave in output).
19 P0.4 bidirectional General purpose digital I/O pin P0.4, shared with SPISS (SPI slave select I/O) and PWM5 (PWM unit output).
20 VDD power_in Power supply for digital circuit.

Key specifications

Parameter Value
Manufacturer Nuvoton Tech
Package TSSOP-20
Category Embedded Processors & Controllers
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC Power Supply VDD-VSS -0.3 7 V 50
Input Voltage VIN -0.3 V VSS -0.3 to VDD +0.3 as printed (min VSS-0.3, max VDD+0.3) 50
Oscillator Frequency 1/tCLCL 4 24 MHz 50
Operating Temperature TA -40 105 ℃ 50
Storage Temperature TST -55 150 ℃ 50
Maximum Current into VDD IDD 120 mA 50
Maximum Current out of VSS ISS 120 mA 50
Maximum Current sunk by an I/O pin IIO 35 mA 50
Maximum Current sourced by an I/O pin IIO 35 mA 50
Maximum Current sunk by total I/O pins IIO 100 mA 50
Maximum Current sourced by total I/O pins IIO 100 mA 50
Operation voltage VDD 2.5 5.5 V VDD = 2.5V ~ 5.5V up to 24 MHz 50
Power Ground VSS / AVSS -0.3 V 50
LDO Output Voltage VLDO 1.62 1.8 1.98 V VDD ≥ 2.5 V 50
Band-gap Voltage VBG 1.2 1.24 1.28 V VDD = 2.5V ~ 5.5V, TA = 25°C 50
Band-gap Voltage VBG 1.18 1.24 1.32 V VDD = 2.5V ~ 5.5V, TA = -40°C~105°C 50
Allowed Voltage Difference for VDD and AVDD VDD-AVDD -0.3 0 0.3 V - 50
Logic 1 to 0 Transition Current P0-P5 (Quasi-bidirectional) ITL -690 -750 µA VDD = 5.5 V, VIN = 2.0V 57
Input Leakage Current P0-P5 ILK -1 1 µA VDD = 5.5 V, 0 < VIN< VDD, Open-drain or input only mode 57
Input Low Voltage P0-P5 (TTL Input) VIL1 -0.3 0.8 V VDD = 4.5 V 57
Input Low Voltage P0-P5 (TTL Input) VIL1 -0.3 0.6 V VDD = 2.5 V 57
Input High Voltage P0-P5 (TTL Input) VIH1 2 V VDD = 5.5 V; max VDD + 0.3 57
Input High Voltage P0-P5 (TTL Input) VIH1 1.5 V VDD = 3.0 V; max VDD + 0.3 57
Input Low Voltage XTAL1 VIL3 0 0.8 V VDD = 4.5 V 57
Input Low Voltage XTAL1 VIL3 0 0.4 V VDD = 2.5 V 57
Input High Voltage XTAL1 VIH3 3.5 V VDD = 5.5 V; max VDD + 0.3 57
Input High Voltage XTAL1 VIH3 2.4 V VDD = 3.0 V; max VDD + 0.3 57
Internal /RESET Pin Pull-up Resistor RRST 40 150 kΩ VDD = 2.5 V ~ 5.5V 57
Source Current P0-P5 (Quasi-bidirectional) ISR11 -300 -400 µA VDD = 4.5 V, VS = 2.4 V 57
Source Current P0-P5 (Quasi-bidirectional) ISR12 -50 -80 µA VDD = 2.7 V, VS = 2.2 V 57
Source Current P0-P5 (Quasi-bidirectional) ISR13 -40 -73 µA VDD = 2.5 V, VS = 2.0 V 57
Source Current P0-P5 (Push-pull) ISR21 -20 -26 mA VDD = 4.5 V, VS = 2.4 V 57
Source Current P0-P5 (Push-pull) ISR22 -3 -5 mA VDD = 2.7 V, VS = 2.2 V 57
Source Current P0-P5 (Push-pull) ISR23 -2.5 -5 mA VDD = 2.5 V, VS = 2.0 V 57
Sink Current P0-P5 ISK11 10 15 mA VDD = 4.5 V, VS = 0.45 V 57
Sink Current P0-P5 ISK12 6 9 mA VDD = 2.7 V, VS = 0.45 V 57
Sink Current P0-P5 ISK13 5 8 mA VDD = 2.5 V, VS = 0.45 V 58
Clock High Time tCHCX 10 ns 58
Clock Low Time tCLCX 10 ns 58
Clock Rise Time tCLCH 2 15 ns 58
Clock Fall Time tCHCL 2 15 ns 58
HXT Operation Voltage VHXT 2.5 5.5 V 58
HXT Temperature TA -40 105 ℃ 58
HXT Clock Frequency fHXT 4 24 MHz 58
HIRC Supply Voltage VHRC 1.62 1.8 1.98 V 59
HIRC Calibrated Oscillator Frequency fHRC -1 1 % TA = 25 ℃, VDD = 5 V 59
HIRC Calibrated Oscillator Frequency fHRC -2 2 % TA = -40℃105℃, VDD=2.5 V 5.5 V 59
HIRC Center Frequency fHRC 22.1184 MHz 59
LIRC Supply Voltage VLRC 2.5 5.5 V 60
LIRC Oscillator Frequency fLRC -10 10 % VDD=2.5V~ 5.5V, TA = 25℃ 60
LIRC Oscillator Frequency fLRC -40 40 % VDD=2.5V~ 5.5V, TA = -40℃~+105℃ 60
ADC Resolution 10 Bit 61
ADC Clock Frequency FADC 4.2 MHz AVDD = 4.5~5.5 V 61
ADC Clock Frequency FADC 2.8 MHz AVDD =2.5~5.5 V 61
ADC Sample Rate FS 300 kSPS AVDD = 4.5~5.5 V 61
ADC Sample Rate FS 200 kSPS AVDD = 2.5~5.5 V 61
ADC Supply Voltage AVDD 2.5 5.5 V 61
Comparator Supply Voltage VCMP 2.5 5.5 V 64

CAD (KiCad official)

  • Symbol: MINI54FDE
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: mini54fde-etched.step / mini54fde-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mini54fde.step / mini54fde.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Nuvoton Tech datasheet (70 pp, sha256 416d3456a5134048, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF