Generated by kicad-footprint-generator · KiCad file format 20260206
MINI54FDE
Nuvoton Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TSSOP-20
MINI54FDE from Nuvoton Tech, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P1.2 | bidirectional | General purpose digital I/O pin P1.2, shared with AIN2 (ADC analog input), RX (UART data receiver input) and ACMP0_P (analog comparator positive input). |
| 2 | P1.3 | bidirectional | General purpose digital I/O pin P1.3, shared with AIN3 (ADC analog input), TX (UART transmitter output) and ACMP0_P (analog comparator positive input). |
| 3 | P1.4 | bidirectional | General purpose digital I/O pin P1.4, shared with AIN4 (ADC analog input per the pin diagram) and ACMP0_N (analog comparator negative input). |
| 4 | P1.5 | bidirectional | General purpose digital I/O pin P1.5, shared with AIN5 (ADC analog input) and ACMP0_P (analog comparator positive input). |
| 5 | /RESET | input | Schmitt trigger input for hardware device reset; a low for 768 clock counts of the internal 22.1184 MHz RC while the system clock is running resets the device, and an internal pull-up allows power-on reset with just an external capacitor to GND. |
| 6 | P3.2 | bidirectional | General purpose digital I/O pin P3.2, shared with INT0 (external interrupt 0 input), STADC (ADC external trigger input), T0EX (Timer 0 external capture/reset trigger input) and ACMP1_P (analog comparator positive input). |
| 7 | P3.4 | bidirectional | General purpose digital I/O pin P3.4, shared with T0 (Timer 0 external event counter input), SDA (I2C data I/O) and ACMP1_P (analog comparator positive input). |
| 8 | P3.5 | bidirectional | General purpose digital I/O pin P3.5, shared with T1 (Timer 1 external event counter input), SCL (I2C clock I/O) and ACMP1_P (analog comparator positive input). |
| 9 | P5.1 | bidirectional | General purpose digital I/O pin P5.1, also XTAL2, the output of the internal inverting amplifier that emits the inverted signal of XTAL1. |
| 10 | P5.0 | bidirectional | General purpose digital I/O pin P5.0, also XTAL1, the input to the internal inverting amplifier; the system clock can come from an external crystal or resonator. |
| 11 | VSS | power_in | Ground pin for digital circuit. |
| 12 | P2.4 | bidirectional | General purpose digital I/O pin P2.4, shared with PWM2 (PWM unit output). |
| 13 | P2.5 | bidirectional | General purpose digital I/O pin P2.5, shared with PWM3 (PWM unit output). |
| 14 | P4.6 | bidirectional | General purpose digital I/O pin P4.6, shared with ICE_CLK (serial wired debugger clock input). |
| 15 | P4.7 | bidirectional | General purpose digital I/O pin P4.7, shared with ICE_DAT (serial wired debugger data I/O). |
| 16 | P0.7 | bidirectional | General purpose digital I/O pin P0.7, shared with SPICLK (SPI serial clock I/O). |
| 17 | P0.6 | bidirectional | General purpose digital I/O pin P0.6, shared with MISO (SPI master in/slave out I/O). |
| 18 | P0.5 | bidirectional | General purpose digital I/O pin P0.5, shared with MOSI (SPI master out/slave in output). |
| 19 | P0.4 | bidirectional | General purpose digital I/O pin P0.4, shared with SPISS (SPI slave select I/O) and PWM5 (PWM unit output). |
| 20 | VDD | power_in | Power supply for digital circuit. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nuvoton Tech |
| Package | TSSOP-20 |
| Category | Embedded Processors & Controllers |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Power Supply | VDD-VSS | -0.3 | 7 | V | 50 | ||
| Input Voltage | VIN | -0.3 | V | VSS -0.3 to VDD +0.3 as printed (min VSS-0.3, max VDD+0.3) | 50 | ||
| Oscillator Frequency | 1/tCLCL | 4 | 24 | MHz | 50 | ||
| Operating Temperature | TA | -40 | 105 | ℃ | 50 | ||
| Storage Temperature | TST | -55 | 150 | ℃ | 50 | ||
| Maximum Current into VDD | IDD | 120 | mA | 50 | |||
| Maximum Current out of VSS | ISS | 120 | mA | 50 | |||
| Maximum Current sunk by an I/O pin | IIO | 35 | mA | 50 | |||
| Maximum Current sourced by an I/O pin | IIO | 35 | mA | 50 | |||
| Maximum Current sunk by total I/O pins | IIO | 100 | mA | 50 | |||
| Maximum Current sourced by total I/O pins | IIO | 100 | mA | 50 | |||
| Operation voltage | VDD | 2.5 | 5.5 | V | VDD = 2.5V ~ 5.5V up to 24 MHz | 50 | |
| Power Ground | VSS / AVSS | -0.3 | V | 50 | |||
| LDO Output Voltage | VLDO | 1.62 | 1.8 | 1.98 | V | VDD ≥ 2.5 V | 50 |
| Band-gap Voltage | VBG | 1.2 | 1.24 | 1.28 | V | VDD = 2.5V ~ 5.5V, TA = 25°C | 50 |
| Band-gap Voltage | VBG | 1.18 | 1.24 | 1.32 | V | VDD = 2.5V ~ 5.5V, TA = -40°C~105°C | 50 |
| Allowed Voltage Difference for VDD and AVDD | VDD-AVDD | -0.3 | 0 | 0.3 | V | - | 50 |
| Logic 1 to 0 Transition Current P0-P5 (Quasi-bidirectional) | ITL | -690 | -750 | µA | VDD = 5.5 V, VIN = 2.0V | 57 | |
| Input Leakage Current P0-P5 | ILK | -1 | 1 | µA | VDD = 5.5 V, 0 < VIN< VDD, Open-drain or input only mode | 57 | |
| Input Low Voltage P0-P5 (TTL Input) | VIL1 | -0.3 | 0.8 | V | VDD = 4.5 V | 57 | |
| Input Low Voltage P0-P5 (TTL Input) | VIL1 | -0.3 | 0.6 | V | VDD = 2.5 V | 57 | |
| Input High Voltage P0-P5 (TTL Input) | VIH1 | 2 | V | VDD = 5.5 V; max VDD + 0.3 | 57 | ||
| Input High Voltage P0-P5 (TTL Input) | VIH1 | 1.5 | V | VDD = 3.0 V; max VDD + 0.3 | 57 | ||
| Input Low Voltage XTAL1 | VIL3 | 0 | 0.8 | V | VDD = 4.5 V | 57 | |
| Input Low Voltage XTAL1 | VIL3 | 0 | 0.4 | V | VDD = 2.5 V | 57 | |
| Input High Voltage XTAL1 | VIH3 | 3.5 | V | VDD = 5.5 V; max VDD + 0.3 | 57 | ||
| Input High Voltage XTAL1 | VIH3 | 2.4 | V | VDD = 3.0 V; max VDD + 0.3 | 57 | ||
| Internal /RESET Pin Pull-up Resistor | RRST | 40 | 150 | kΩ | VDD = 2.5 V ~ 5.5V | 57 | |
| Source Current P0-P5 (Quasi-bidirectional) | ISR11 | -300 | -400 | µA | VDD = 4.5 V, VS = 2.4 V | 57 | |
| Source Current P0-P5 (Quasi-bidirectional) | ISR12 | -50 | -80 | µA | VDD = 2.7 V, VS = 2.2 V | 57 | |
| Source Current P0-P5 (Quasi-bidirectional) | ISR13 | -40 | -73 | µA | VDD = 2.5 V, VS = 2.0 V | 57 | |
| Source Current P0-P5 (Push-pull) | ISR21 | -20 | -26 | mA | VDD = 4.5 V, VS = 2.4 V | 57 | |
| Source Current P0-P5 (Push-pull) | ISR22 | -3 | -5 | mA | VDD = 2.7 V, VS = 2.2 V | 57 | |
| Source Current P0-P5 (Push-pull) | ISR23 | -2.5 | -5 | mA | VDD = 2.5 V, VS = 2.0 V | 57 | |
| Sink Current P0-P5 | ISK11 | 10 | 15 | mA | VDD = 4.5 V, VS = 0.45 V | 57 | |
| Sink Current P0-P5 | ISK12 | 6 | 9 | mA | VDD = 2.7 V, VS = 0.45 V | 57 | |
| Sink Current P0-P5 | ISK13 | 5 | 8 | mA | VDD = 2.5 V, VS = 0.45 V | 58 | |
| Clock High Time | tCHCX | 10 | ns | 58 | |||
| Clock Low Time | tCLCX | 10 | ns | 58 | |||
| Clock Rise Time | tCLCH | 2 | 15 | ns | 58 | ||
| Clock Fall Time | tCHCL | 2 | 15 | ns | 58 | ||
| HXT Operation Voltage | VHXT | 2.5 | 5.5 | V | 58 | ||
| HXT Temperature | TA | -40 | 105 | ℃ | 58 | ||
| HXT Clock Frequency | fHXT | 4 | 24 | MHz | 58 | ||
| HIRC Supply Voltage | VHRC | 1.62 | 1.8 | 1.98 | V | 59 | |
| HIRC Calibrated Oscillator Frequency | fHRC | -1 | 1 | % | TA = 25 ℃, VDD = 5 V | 59 | |
| HIRC Calibrated Oscillator Frequency | fHRC | -2 | 2 | % | TA = -40℃ |
59 | |
| HIRC Center Frequency | fHRC | 22.1184 | MHz | 59 | |||
| LIRC Supply Voltage | VLRC | 2.5 | 5.5 | V | 60 | ||
| LIRC Oscillator Frequency | fLRC | -10 | 10 | % | VDD=2.5V~ 5.5V, TA = 25℃ | 60 | |
| LIRC Oscillator Frequency | fLRC | -40 | 40 | % | VDD=2.5V~ 5.5V, TA = -40℃~+105℃ | 60 | |
| ADC Resolution | 10 | Bit | 61 | ||||
| ADC Clock Frequency | FADC | 4.2 | MHz | AVDD = 4.5~5.5 V | 61 | ||
| ADC Clock Frequency | FADC | 2.8 | MHz | AVDD =2.5~5.5 V | 61 | ||
| ADC Sample Rate | FS | 300 | kSPS | AVDD = 4.5~5.5 V | 61 | ||
| ADC Sample Rate | FS | 200 | kSPS | AVDD = 2.5~5.5 V | 61 | ||
| ADC Supply Voltage | AVDD | 2.5 | 5.5 | V | 61 | ||
| Comparator Supply Voltage | VCMP | 2.5 | 5.5 | V | 64 |
CAD (KiCad official)
- Symbol:
MINI54FDE - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
mini54fde-etched.step/mini54fde-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mini54fde.step/mini54fde.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nuvoton Tech datasheet (70 pp, sha256
416d3456a5134048, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).