Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents

README

markdown

LP5907QMFX-3.3Q1

Texas Instruments LP5907QMFX 3 3Q1 · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

LP5907QMFX-3.3Q1 from Texas Instruments LP5907QMFX 3 3Q1, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Input voltage supply, 2.2 V to 5.5 V. Connect a 1-µF ceramic capacitor from this pin to GND close to the device.
2 GND power_in Common ground reference. All device voltages are referenced to this pin.
3 EN input Enable input. A low voltage (<VIL) turns the regulator off and discharges OUT to GND through an internal 230-Ω pull-down. A high voltage (>VIH) enables the regulator. Pin has an internal 1-MΩ pull-down that holds the regulator off by default. Absolute max 6 V.
4 N/C unconnected No internal electrical connection. Can be left floating or tied to GND per layout preference.
5 OUT power_out Regulated 3.3-V output, up to 250 mA. Connect a minimum 1-µF low-ESR ceramic capacitor from this pin to GND (may be placed remotely from the device). An internal 230-Ω (typical) pull-down discharges VOUT when the regulator is disabled (VEN low).

Key specifications

Parameter Value
Manufacturer Texas Instruments LP5907QMFX 3 3Q1
Package SOT-23-5
Category PMIC
Pins 5

Ordering variants

  • LP5907QMFX-3.3Q1

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input supply voltage VIN 2.2 5.5 V 4
Enable input voltage VEN 0 5.5 V 4
Output current IOUT 0 250 mA 4
Operating junction temperature TJ-MAX-OP -40 125 °C 4
Input voltage VIN -0.3 6 V 4
Output voltage VOUT -0.3 V 4
Enable input voltage VEN -0.3 6 V 4
Junction temperature TJMAX 150 °C 4
Storage temperature range Tstg -65 150 °C 4
Electrostatic discharge, human body model V(ESD) -2000 2000 V Human body model (HBM), per AEC Q100-002 4
Electrostatic discharge, charged device model, corner pins V(ESD) -1000 1000 V Charged device model (CDM), per AEC Q100-011, corner pins (1,3,4,5) 4
Electrostatic discharge, charged device model, other pin V(ESD) -1000 1000 V Charged device model (CDM), per AEC Q100-011, other pin (2) 4
Output voltage tolerance %VOUT -2 2 % VIN = (VOUT(NOM) + 1 V) to 5.5 V, IOUT = 1 mA to 250 mA, VOUT ≥ 1.8 V 5
Input voltage VIN 2.2 5.5 V TA = 25°C 5
Output load current ILOAD 0 250 mA 5
Quiescent current IQ 12 25 µA VEN = 1.2 V, IOUT = 0 mA 5
Quiescent current IQ 250 425 µA VEN = 1.2 V, IOUT = 250 mA 5
Ground current IG 0.2 1 µA VEN = 0.3 V (Disabled) 5
Short circuit current limit ISC 250 500 mA TA = 25°C 5
Line transient ΔVOUT -1 mV VIN = (VOUT(NOM) + 1 V) to (VOUT(NOM) + 1.6 V) in 30 µs 6
Line transient ΔVOUT 1 mV VIN = (VOUT(NOM) + 1.6 V) to (VOUT(NOM) + 1.6 V) in 30 µs 6
Load transient ΔVOUT -40 mV IOUT = 1 mA to 250 mA in 10 µs 6
Load transient ΔVOUT 40 mV IOUT = 250 mA to 1mA in 10 µs 6
Turn-on time tON 80 150 µs From VEN > VIH to VOUT = 95% of VOUT(NOM), TA = 25°C 6
Input capacitance CIN 0.7 1 µF 6
Output capacitance COUT 0.7 1 10 µF 6
Output/input capacitor ESR ESR 5 500 mΩ 6
Junction-to-ambient thermal resistance RθJA 193.4 °C/W SOT-23 (DBV) 5 pins, JESD51-7 board 4
Junction-to-case (top) thermal resistance RθJC(top) 102.1 °C/W SOT-23 (DBV) 5 pins, JESD51-7 board 4
Junction-to-board thermal resistance RθJB 45.8 °C/W SOT-23 (DBV) 5 pins, JESD51-7 board 4
Junction-to-top characterization parameter ψJT 8.4 °C/W SOT-23 (DBV) 5 pins, JESD51-7 board 4
Junction-to-board characterization parameter ψJB 45.3 °C/W SOT-23 (DBV) 5 pins, JESD51-7 board 4

CAD (KiCad official)

  • Symbol: LP5907QMFX-3.3Q1
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: lp5907qmfx-3-3q1-etched.step / lp5907qmfx-3-3q1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lp5907qmfx-3-3q1.step / lp5907qmfx-3-3q1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments LP5907QMFX 3 3Q1 datasheet (None pp, sha256 a41c3d9e004e32d6, retrieved 2026-08-17, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF