Generated by kicad-footprint-generator · KiCad file format 20260206
LP5907QMFX-3.3Q1
Texas Instruments LP5907QMFX 3 3Q1 · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LP5907QMFX-3.3Q1 from Texas Instruments LP5907QMFX 3 3Q1, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input voltage supply, 2.2 V to 5.5 V. Connect a 1-µF ceramic capacitor from this pin to GND close to the device. |
| 2 | GND | power_in | Common ground reference. All device voltages are referenced to this pin. |
| 3 | EN | input | Enable input. A low voltage (<VIL) turns the regulator off and discharges OUT to GND through an internal 230-Ω pull-down. A high voltage (>VIH) enables the regulator. Pin has an internal 1-MΩ pull-down that holds the regulator off by default. Absolute max 6 V. |
| 4 | N/C | unconnected | No internal electrical connection. Can be left floating or tied to GND per layout preference. |
| 5 | OUT | power_out | Regulated 3.3-V output, up to 250 mA. Connect a minimum 1-µF low-ESR ceramic capacitor from this pin to GND (may be placed remotely from the device). An internal 230-Ω (typical) pull-down discharges VOUT when the regulator is disabled (VEN low). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments LP5907QMFX 3 3Q1 |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
LP5907QMFX-3.3Q1
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage | VIN | 2.2 | 5.5 | V | 4 | ||
| Enable input voltage | VEN | 0 | 5.5 | V | 4 | ||
| Output current | IOUT | 0 | 250 | mA | 4 | ||
| Operating junction temperature | TJ-MAX-OP | -40 | 125 | °C | 4 | ||
| Input voltage | VIN | -0.3 | 6 | V | 4 | ||
| Output voltage | VOUT | -0.3 | V | 4 | |||
| Enable input voltage | VEN | -0.3 | 6 | V | 4 | ||
| Junction temperature | TJMAX | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Electrostatic discharge, human body model | V(ESD) | -2000 | 2000 | V | Human body model (HBM), per AEC Q100-002 | 4 | |
| Electrostatic discharge, charged device model, corner pins | V(ESD) | -1000 | 1000 | V | Charged device model (CDM), per AEC Q100-011, corner pins (1,3,4,5) | 4 | |
| Electrostatic discharge, charged device model, other pin | V(ESD) | -1000 | 1000 | V | Charged device model (CDM), per AEC Q100-011, other pin (2) | 4 | |
| Output voltage tolerance | %VOUT | -2 | 2 | % | VIN = (VOUT(NOM) + 1 V) to 5.5 V, IOUT = 1 mA to 250 mA, VOUT ≥ 1.8 V | 5 | |
| Input voltage | VIN | 2.2 | 5.5 | V | TA = 25°C | 5 | |
| Output load current | ILOAD | 0 | 250 | mA | 5 | ||
| Quiescent current | IQ | 12 | 25 | µA | VEN = 1.2 V, IOUT = 0 mA | 5 | |
| Quiescent current | IQ | 250 | 425 | µA | VEN = 1.2 V, IOUT = 250 mA | 5 | |
| Ground current | IG | 0.2 | 1 | µA | VEN = 0.3 V (Disabled) | 5 | |
| Short circuit current limit | ISC | 250 | 500 | mA | TA = 25°C | 5 | |
| Line transient | ΔVOUT | -1 | mV | VIN = (VOUT(NOM) + 1 V) to (VOUT(NOM) + 1.6 V) in 30 µs | 6 | ||
| Line transient | ΔVOUT | 1 | mV | VIN = (VOUT(NOM) + 1.6 V) to (VOUT(NOM) + 1.6 V) in 30 µs | 6 | ||
| Load transient | ΔVOUT | -40 | mV | IOUT = 1 mA to 250 mA in 10 µs | 6 | ||
| Load transient | ΔVOUT | 40 | mV | IOUT = 250 mA to 1mA in 10 µs | 6 | ||
| Turn-on time | tON | 80 | 150 | µs | From VEN > VIH to VOUT = 95% of VOUT(NOM), TA = 25°C | 6 | |
| Input capacitance | CIN | 0.7 | 1 | µF | 6 | ||
| Output capacitance | COUT | 0.7 | 1 | 10 | µF | 6 | |
| Output/input capacitor ESR | ESR | 5 | 500 | mΩ | 6 | ||
| Junction-to-ambient thermal resistance | RθJA | 193.4 | °C/W | SOT-23 (DBV) 5 pins, JESD51-7 board | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 102.1 | °C/W | SOT-23 (DBV) 5 pins, JESD51-7 board | 4 | ||
| Junction-to-board thermal resistance | RθJB | 45.8 | °C/W | SOT-23 (DBV) 5 pins, JESD51-7 board | 4 | ||
| Junction-to-top characterization parameter | ψJT | 8.4 | °C/W | SOT-23 (DBV) 5 pins, JESD51-7 board | 4 | ||
| Junction-to-board characterization parameter | ψJB | 45.3 | °C/W | SOT-23 (DBV) 5 pins, JESD51-7 board | 4 |
CAD (KiCad official)
- Symbol:
LP5907QMFX-3.3Q1 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lp5907qmfx-3-3q1-etched.step/lp5907qmfx-3-3q1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lp5907qmfx-3-3q1.step/lp5907qmfx-3-3q1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments LP5907QMFX 3 3Q1 datasheet (None pp, sha256
a41c3d9e004e32d6, retrieved 2026-08-17, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).