Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TLV62084ADSGR

Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)

TLV62084ADSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Device enable logic input; logic HIGH (≥1 V) enables device operation and logic LOW (≤0.4 V) disables device and enters shutdown mode; must not be left floating.
2 GND power_in Power and signal ground.
3 GND power_in Power and signal ground.
4 FB input Feedback terminal for internal control loop; connect to external feedback voltage divider to program output voltage; regulation voltage is 0.438 to 0.462 V (typically 0.45 V).
5 VOS input Output voltage sense terminal for internal control loop; must be connected to device output.
6 PG output Power Good open-drain output; pulled low when output voltage falls below 90% of regulated value with ±5% hysteresis; capable of sinking 500 µA; can be left floating if unused.
7 SW output Switch terminal connected to internal MOSFET switches and driven by inductor terminal of output filter; operates at 2 MHz nominal switching frequency.
8 VIN power_in Power supply voltage input; operating voltage range 2.7 V to 6 V for TLV62084 and TLV62084A.
9 EPAD power_in Exposed thermal pad; must be connected to GND and must be soldered to achieve appropriate power dissipation and mechanical reliability.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-8-EP(2x2)
Category Power Management (PMIC)
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Input voltage range, TLV62084, TLV62084A VIN 2.7 6 V 6
Power good threshold (VOUT falling referenced to VOUT nominal) VPG -15 -10 -5 % VOUT falling referenced to VOUT nominal 6
Feedback regulation voltage VFB 0.438 0.45 0.462 V VIN ≥ 2.5 V and VIN ≥ VOUT + 1 V 6
High side FET switch current-limit, TLV62084A ILIM 2.3 2.8 4 A Rising inductor current 6
VIN Input voltage range, TLV62084, TLV62084A VIN 2.7 6 V 5
Operating junction temperature TJ -40 125 °C 5
Voltage range VIN, PG, VOS VIN -0.3 7 V 5
Voltage range SW SW -0.3 V Upper limit printed as VIN + 0.3 V 5
Voltage range SW (AC) SW -3 10 V AC, less than 10 ns; while switching 5
Voltage range FB FB -0.3 3.6 V 5
Voltage range EN EN -0.3 V Upper limit printed as VIN + 0.3 V 5
Power Good Sink Current 1 mA PG 5
Operating junction temperature range TJ -40 150 °C 5
Storage temperature range Tstg -65 150 °C 5
ESD stress voltage, human body model (HBM) V(ESD) -2000 2000 V Human body model (HBM); printed ±2000 V 5
ESD stress voltage, charged device model (CDM) V(ESD) -500 500 V Charged device model (CDM); printed ±500 V 5
Junction-to-ambient thermal resistance θJA 59.7 °C/W DSG (8-pin WSON) package 5
Junction-to-case (top) thermal resistance θJCtop 70.1 °C/W DSG (8-pin WSON) package 5
Junction-to-board thermal resistance θJB 30.9 °C/W DSG (8-pin WSON) package 5
Junction-to-top characterization parameter ψJT 1.4 °C/W DSG (8-pin WSON) package 5
Junction-to-board characterization parameter ψJB 31.5 °C/W DSG (8-pin WSON) package 5
Junction-to-case (bottom) thermal resistance θJCbot 8.6 °C/W DSG (8-pin WSON) package 5

CAD (KiCad official)

  • Symbol: TLV62084ADSGR
  • Footprint: Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm
  • 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tlv62084adsgr-etched.step / tlv62084adsgr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv62084adsgr.step / tlv62084adsgr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 58a59ba3238e22a3, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF