component
TLV62084ADSGR
Public Made by Adomby adom
Texas Instruments DC-DC Converters, WSON-8-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTLV62084ADSGR
Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)
TLV62084ADSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Device enable logic input; logic HIGH (≥1 V) enables device operation and logic LOW (≤0.4 V) disables device and enters shutdown mode; must not be left floating. |
| 2 | GND | power_in | Power and signal ground. |
| 3 | GND | power_in | Power and signal ground. |
| 4 | FB | input | Feedback terminal for internal control loop; connect to external feedback voltage divider to program output voltage; regulation voltage is 0.438 to 0.462 V (typically 0.45 V). |
| 5 | VOS | input | Output voltage sense terminal for internal control loop; must be connected to device output. |
| 6 | PG | output | Power Good open-drain output; pulled low when output voltage falls below 90% of regulated value with ±5% hysteresis; capable of sinking 500 µA; can be left floating if unused. |
| 7 | SW | output | Switch terminal connected to internal MOSFET switches and driven by inductor terminal of output filter; operates at 2 MHz nominal switching frequency. |
| 8 | VIN | power_in | Power supply voltage input; operating voltage range 2.7 V to 6 V for TLV62084 and TLV62084A. |
| 9 | EPAD | power_in | Exposed thermal pad; must be connected to GND and must be soldered to achieve appropriate power dissipation and mechanical reliability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Power Management (PMIC) |
| Pins | 9 |
CAD (KiCad official)
- Symbol:
TLV62084ADSGR - Footprint:
Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm - 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
tlv62084adsgr-etched.step/tlv62084adsgr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv62084adsgr.step/tlv62084adsgr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
58a59ba3238e22a3, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).