3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownWL2405
WL · RF Transceiver ICs · SOP-16
WL2405 from WL, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ANT | passive | RF signal input/output (antenna port, marked 'A' in the datasheet pin table); no voltage or impedance limits are given for this pin. |
| 2 | VCC | power_in | Power supply input; the datasheet gives the operating supply as VDD 2.0 V to 3.6 V with absolute maximum -0.3 V to 3.6 V. |
| 3 | PB5 | bidirectional | Bidirectional I/O pin that can also output PWM4. |
| 4 | PA0 | bidirectional | Bidirectional I/O pin that can also serve as a comparator input and output PWM2. |
| 5 | PA1 | bidirectional | Bidirectional I/O pin that can also serve as a comparator input, output PWM5, and act as the Timer3 clock source EX_CKI1. |
| 6 | VDD | power_in | Power supply input; the datasheet gives the operating supply as 2.0 V to 3.6 V with absolute maximum -0.3 V to 3.6 V, and the chip operates normally above 1.7 V. |
| 7 | PA7 | bidirectional | Bidirectional I/O pin that can also serve as crystal output Xout or as instruction clock output. |
| 8 | PA5 | bidirectional | I/O pin selectable as an input or open-drain output, which can also be used as the reset pin RSTb. |
| 9 | PA6 | bidirectional | Bidirectional I/O pin that can also serve as crystal input Xin. |
| 10 | PA4 | bidirectional | Bidirectional I/O pin that can also output PWM1, serve as Timer0/1 external clock source EX_CKI0, or act as programming clock input SCK. |
| 11 | PA3 | bidirectional | Bidirectional I/O pin that can also serve as a comparator input, output PWM3, or act as programming data output SDO. |
| 12 | PA2 | bidirectional | Bidirectional I/O pin that can also serve as a comparator input, output PWM4, external interrupt 1 input INT1, or programming data input SDI. |
| 13 | VCC | power_in | Power supply input; the datasheet gives the operating supply as VDD 2.0 V to 3.6 V with absolute maximum -0.3 V to 3.6 V. |
| 14 | XC1 | bidirectional | Crystal oscillator input pin, listed as I/O in the datasheet pin table. |
| 15 | XC2 | bidirectional | Crystal oscillator output pin, listed as I/O in the datasheet pin table. |
| 16 | VSS | power_in | Ground (chip ground), 0 V reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | WL |
| Package | SOP-16 |
| Category | RF & Radio |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 工作频率 (operating frequency) | fOP | 2400 | 2483 | MHz | VCC = 3V±5%, TA=25℃ | 4 | |
| 码率 (data rate) | DR | 0.125 | 2 | Mbps | VCC = 3V±5%, TA=25℃ | 4 | |
| 调制频偏@250Kbps | ∆f250K | 160 | 250 | KHz | VCC = 3V±5%, TA=25℃ | 4 | |
| 调制频偏@1Mbps | ∆f1M | 160 | 250 | KHz | VCC = 3V±5%, TA=25℃ | 4 | |
| 输出功率范围 (output power range) | PRFC | -24 | 8 | dBm | VCC = 3V±5%, TA=25℃ | 5 | |
| 供电电压 (supply voltage VDD) | VDD | 2 | 3 | 3.6 | V | VCC = 3V±5%, TA=25℃ | 5 |
| 供电电压 (supply voltage VDD) | VDD | -0.3 | 3.6 | V | 6 | ||
| 输入电压 (input voltage VI) | VI | -0.3 | 3.6 | V | 6 | ||
| 总功耗 (total power dissipation) | Pd | 300 | mW | TA=-40℃~85℃ | 6 | ||
| 工作温度 (operating temperature TOP) | TOP | -40 | 125 | ℃ | 6 | ||
| 存储温度 (storage temperature TSTG) | TSTG | -40 | 125 | ℃ | 6 |
CAD (KiCad official)
- Symbol:
WL2405 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
wl2405-etched.step/wl2405-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);wl2405.step/wl2405.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: WL datasheet (10 pp, sha256
f82a783f374b5d1e, retrieved 2026-11-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).