main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs wl2405: factory component page (tier=lcsc) · Ray
viewers wl2405: viewers · Ray
package.json Publish 0.1.3 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.3 · Ray
verification.json Verified: Rebuilt by the parts factory: tier lcsc, 16 pins · Ray
wl2405-etched.glb Publish 0.1.0 · Ray
wl2405-etched.step wl2405: factory component page (tier=lcsc) · Ray
wl2405-hero.glb wl2405: hero GLB from the etched model (keeps the MPN mark) · Ray
wl2405-hero.overlay.json Publish 0.1.1 · Ray
wl2405.glb Publish 0.1.0 · Ray
wl2405.kicad_mod Publish 0.1.0 · Ray
wl2405.kicad_sym Publish 0.1.3 · Ray
wl2405.lbr Publish 0.1.3 · Ray
wl2405.step Publish 0.1.0 · Ray

WL2405

WL · RF Transceiver ICs · SOP-16

WL2405 from WL, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ANT passive RF signal input/output (antenna port, marked 'A' in the datasheet pin table); no voltage or impedance limits are given for this pin.
2 VCC power_in Power supply input; the datasheet gives the operating supply as VDD 2.0 V to 3.6 V with absolute maximum -0.3 V to 3.6 V.
3 PB5 bidirectional Bidirectional I/O pin that can also output PWM4.
4 PA0 bidirectional Bidirectional I/O pin that can also serve as a comparator input and output PWM2.
5 PA1 bidirectional Bidirectional I/O pin that can also serve as a comparator input, output PWM5, and act as the Timer3 clock source EX_CKI1.
6 VDD power_in Power supply input; the datasheet gives the operating supply as 2.0 V to 3.6 V with absolute maximum -0.3 V to 3.6 V, and the chip operates normally above 1.7 V.
7 PA7 bidirectional Bidirectional I/O pin that can also serve as crystal output Xout or as instruction clock output.
8 PA5 bidirectional I/O pin selectable as an input or open-drain output, which can also be used as the reset pin RSTb.
9 PA6 bidirectional Bidirectional I/O pin that can also serve as crystal input Xin.
10 PA4 bidirectional Bidirectional I/O pin that can also output PWM1, serve as Timer0/1 external clock source EX_CKI0, or act as programming clock input SCK.
11 PA3 bidirectional Bidirectional I/O pin that can also serve as a comparator input, output PWM3, or act as programming data output SDO.
12 PA2 bidirectional Bidirectional I/O pin that can also serve as a comparator input, output PWM4, external interrupt 1 input INT1, or programming data input SDI.
13 VCC power_in Power supply input; the datasheet gives the operating supply as VDD 2.0 V to 3.6 V with absolute maximum -0.3 V to 3.6 V.
14 XC1 bidirectional Crystal oscillator input pin, listed as I/O in the datasheet pin table.
15 XC2 bidirectional Crystal oscillator output pin, listed as I/O in the datasheet pin table.
16 VSS power_in Ground (chip ground), 0 V reference.

Key specifications

Parameter Value
Manufacturer WL
Package SOP-16
Category RF & Radio
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
工作频率 (operating frequency) fOP 2400 2483 MHz VCC = 3V±5%, TA=25℃ 4
码率 (data rate) DR 0.125 2 Mbps VCC = 3V±5%, TA=25℃ 4
调制频偏@250Kbps ∆f250K 160 250 KHz VCC = 3V±5%, TA=25℃ 4
调制频偏@1Mbps ∆f1M 160 250 KHz VCC = 3V±5%, TA=25℃ 4
输出功率范围 (output power range) PRFC -24 8 dBm VCC = 3V±5%, TA=25℃ 5
供电电压 (supply voltage VDD) VDD 2 3 3.6 V VCC = 3V±5%, TA=25℃ 5
供电电压 (supply voltage VDD) VDD -0.3 3.6 V 6
输入电压 (input voltage VI) VI -0.3 3.6 V 6
总功耗 (total power dissipation) Pd 300 mW TA=-40℃~85℃ 6
工作温度 (operating temperature TOP) TOP -40 125 ℃ 6
存储温度 (storage temperature TSTG) TSTG -40 125 ℃ 6

CAD (KiCad official)

  • Symbol: WL2405
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: wl2405-etched.step / wl2405-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); wl2405.step / wl2405.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: WL datasheet (10 pp, sha256 f82a783f374b5d1e, retrieved 2026-11-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF