Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NUC029LEE

Nuvoton Tech · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)

NUC029LEE from Nuvoton Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VBAT power_in Power supply by batteries for RTC.
2 X32_OUT output External 32.768 kHz (low speed) crystal output pin.
3 X32_IN input External 32.768 kHz (low speed) crystal input pin.
4 PA.11 bidirectional General purpose digital I/O pin; alternate functions are I2C1_SCL (I2C1 clock pin) and nRD (EBI read enable output pin).
5 PA.10 bidirectional General purpose digital I/O pin; alternate functions are I2C1_SDA (I2C1 data input/output pin) and nWR (EBI write enable output pin).
6 PA.9 bidirectional General purpose digital I/O pin; alternate function I2C0_SCL (I2C0 clock pin).
7 PA.8 bidirectional General purpose digital I/O pin; alternate function I2C0_SDA (I2C0 data input/output pin).
8 PB.4 bidirectional General purpose digital I/O pin; alternate function UART1_RXD (data receiver input pin for UART1).
9 PB.5 bidirectional General purpose digital I/O pin; alternate function UART1_TXD (data transmitter output pin for UART1).
10 LDO_CAP power_out LDO output pin.
11 VDD power_in Power supply for I/O ports and LDO source for internal PLL and digital circuit.
12 VSS power_in Ground pin for digital circuit.
13 USB_VBUS power_in Power supply from USB host or HUB.
14 USB_VDD33_CAP power_out USB internal power regulator output 3.3V decoupling pin.
15 USB_D- bidirectional USB differential signal D-.
16 USB_D+ bidirectional USB differential signal D+.
17 PB.0 bidirectional General purpose digital I/O pin; alternate function UART0_RXD (data receiver input pin for UART0).
18 PB.1 bidirectional General purpose digital I/O pin; alternate function UART0_TXD (data transmitter output pin for UART0).
19 PB.2 bidirectional General purpose digital I/O pin; alternate functions are UART0_nRTS (request to send output), TM2_EXT, TM2 and nWRL (EBI low byte write enable output).
20 PB.3 bidirectional General purpose digital I/O pin; alternate functions are UART0_nCTS (clear to send input), TM3_EXT, TM3 and nWRH (EBI high byte write enable output).
21 PC.3 bidirectional General purpose digital I/O pin; alternate function SPI0_MOSI0 (SPI0 master out, slave in pin).
22 PC.2 bidirectional General purpose digital I/O pin; alternate function SPI0_MISO0 (SPI0 master in, slave out pin).
23 PC.1 bidirectional General purpose digital I/O pin; alternate function SPI0_CLK (SPI0 serial clock pin).
24 PC.0 bidirectional General purpose digital I/O pin; alternate function SPI0_SS0 (SPI0 slave select pin).
25 PA.15 bidirectional General purpose digital I/O pin; alternate function PWM3 (PWM3 output/capture input).
26 PA.14 bidirectional General purpose digital I/O pin; alternate functions are PWM2 (PWM2 output/capture input) and AD15 (EBI address/data bus bit15).
27 PA.13 bidirectional General purpose digital I/O pin; alternate functions are PWM1 (PWM1 output/capture input) and AD14 (EBI address/data bus bit14).
28 PA.12 bidirectional General purpose digital I/O pin; alternate functions are PWM0 (PWM0 output/capture input) and AD13 (EBI address/data bus bit13).
29 ICE_DAT bidirectional Serial wire debugger data pin.
30 ICE_CLK input Serial wire debugger clock pin.
31 AVSS power_in Ground pin for analog circuit.
32 PA.0 bidirectional General purpose digital I/O pin; alternate function ADC0 (ADC0 analog input).
33 PA.1 bidirectional General purpose digital I/O pin; alternate functions are ADC1 (ADC1 analog input) and AD12 (EBI address/data bus bit12).
34 PA.2 bidirectional General purpose digital I/O pin; alternate functions are ADC2 (ADC2 analog input) and AD11 (EBI address/data bus bit11).
35 PA.3 bidirectional General purpose digital I/O pin; alternate functions are ADC3 (ADC3 analog input) and AD10 (EBI address/data bus bit10).
36 PA.4 bidirectional General purpose digital I/O pin; alternate functions are ADC4 (ADC4 analog input) and AD9 (EBI address/data bus bit9).
37 PA.5 bidirectional General purpose digital I/O pin; alternate functions are ADC5 (ADC5 analog input) and AD8 (EBI address/data bus bit8).
38 PA.6 bidirectional General purpose digital I/O pin; alternate functions are ADC6 (ADC6 analog input) and AD7 (EBI address/data bus bit7).
39 VREF power_in Voltage reference input for ADC.
40 AVDD power_in Power supply for internal analog circuit.
41 PC.7 bidirectional General purpose digital I/O pin; alternate functions are ADC7 (ADC7 analog input) and AD5 (EBI address/data bus bit5).
42 PC.6 bidirectional General purpose digital I/O pin; alternate functions are ADC8 (ADC8 analog input) and AD4 (EBI address/data bus bit4).
43 PB.15 bidirectional General purpose digital I/O pin; alternate functions include INT1 (external interrupt1 input), TM0_EXT, TM0, ADC11 (analog input) and AD6 (EBI address/data bus bit6).
44 PF.0 bidirectional General purpose digital I/O pin; alternate function XT1_OUT (external 4~24 MHz high speed crystal output pin).
45 PF.1 bidirectional General purpose digital I/O pin; alternate function XT1_IN (external 4~24 MHz high speed crystal input pin).
46 nRESET input External reset input: active LOW, with an internal pull-up; setting this pin low resets the chip to initial state.
47 PVSS power_in PLL ground.
48 PB.8 bidirectional General purpose digital I/O pin; alternate functions include STADC (ADC external trigger input), TM0 and CLKO (frequency divider clock output pin).

Key specifications

Parameter Value
Manufacturer Nuvoton Tech
Package LQFP-48(7x7)
Category Single Chip Microcomputer/Microcontroller
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
DC Power Supply VDD -0.3 7 V 60
Oscillator Frequency 1/tCLCL 4 24 MHz 60
Operating Temperature TA -40 105 C 60
Junction temperature TJ -40 125 C 60
Storage Temperature TST -55 150 C 60
Maximum Current into VDD 120 mA 60
Maximum Current out of VSS 120 mA 60
Maximum Current sunk by a I/O pin 35 mA 60
Maximum Current sourced by a I/O pin 35 mA 60
Maximum Current sunk by total I/O pins 100 mA 60
Maximum Current sourced by total I/O pins 100 mA 60
Operation Voltage VDD 2.5 5.5 V VDD = 2.5V ~ 5.5V up to 72 MHz 62
RTC Operation voltage for PF.0~PF.2 VBAT 2.5 5.5 V 62
LDO Output Voltage VLDO 1.62 1.8 1.98 V VDD ≥ 2.5V 62
Band-gap Voltage VBG 1.21 1.29 V VDD = 2.5 V ~ 5.5 V, TA = -40C~105C 62
Allowed voltage difference for VDD and AVDD VDD-AVDD -0.3 0.3 V 62
Calibrated Internal Oscillator Frequency (22.1184 MHz HIRC) fHRC -1 1 % TA = 25 ℃ VDD = 5 V 69
Calibrated Internal Oscillator Frequency (22.1184 MHz HIRC) fHRC -3 3 % TA = -40 ℃ ~ 105 ℃ VDD = 2.5 V ~ 5.5 V 69
Supply Voltage (22.1184 MHz HIRC) VHRC 1.62 1.8 1.98 V 69
Calibrated Internal Oscillator Frequency (48 MHz HIRC) fHRC -1 1 % TA = 25 ℃ VDD = 5 V 69
Calibrated Internal Oscillator Frequency (48 MHz HIRC) fHRC -2 2 % TA = -40 ℃ ~ 105 ℃ VDD = 2.5 V ~ 5.5 V 69
Supply Voltage (48 MHz HIRC) VHRC 1.62 1.8 1.98 V 69
Oscillator Frequency (10 kHz LRC) fLRC -10 10 % VDD = 2.5 V ~ 5.5 V TA = 25℃ 70
Oscillator Frequency (10 kHz LRC) fLRC -50 50 % VDD = 2.5 V ~ 5.5 V TA = -40℃ ~ +105℃ 70
Supply Voltage (10 kHz LRC) VLRC 2.5 5.5 V 70
Operation Voltage (HXT crystal) VHXT 2.5 5.5 V 67
Temperature (HXT crystal) TA -40 105 ℃ 67
Clock Frequency (HXT crystal) fHXT 4 24 MHz 67
Operation Voltage (LXT) VDD 2.5 5.5 V 68
Operation Temperature (LXT) TA -40 105 ℃ 68
Clock High Time tCHCX 10 ns 67
Clock Low Time tCLCX 10 ns 67
Clock Rise Time tCLCH 2 15 ns 67
Clock Fall Time tCHCL 2 15 ns 67
PLL input clock fPLL_IN 4 24 MHz 70
PLL multiplier output clock fPLL_OUT 50 500 MHz 70
Supply Voltage (SARADC AVDD) AVDD 2.5 5.5 V 71
Differential Nonlinearity Error DNL -3 3 LSB 71
Integral Nonlinearity Error INL -4 4 LSB 71
ADC Clock Frequency FADC 21 MHz 71
Sample Rate FS 1000 kSPS 71
Temperature Sensor Gain -1.55 -1.672 -1.75 mV/℃ 74
Temperature Sensor Offset Vos 735 748 755 mV TA = 0 ℃ 74
Temperature Sensor operating temperature TA -40 105 ℃ 74
Input High (driven) VIH 2 V 75
Input Low VIL 0.8 V 75
Differential Input Sensitivity VDI 0.2 V /PADP-PADM/ 75
Differential Common-mode Range VCM 0.8 2.5 V Includes VDI range 75
Single-ended Receiver Threshold VSE 0.8 2 V 75
Output Low (driven) VOL 0 0.3 V 75
Output High (driven) VOH 2.8 3.6 V 75
Output Signal Cross Voltage VCRS 1.3 2 V 75
Pull-up Resistor RPU 1.425 1.575 kΩ 75
Transceiver Capacitance CIN 20 pF Pin to GND 75
Rise Time TFR 4 20 ns CL=50p 75
Fall Time TFF 4 20 ns CL=50p 75
Rise and Fall Time Matching TFRFF 90 111.11 % TFRFF=TFR/TFF 75
VBUS Pin Input Voltage VBUS 4 5 5.5 V 75
LDO Output Voltage (USB) VDD33 2.97 3.3 3.63 V 75
Supply Voltage (Flash) VFLA 1.62 1.8 1.98 V 76

CAD (KiCad official)

  • Symbol: NUC029LEE
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: nuc029lee-etched.step / nuc029lee-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); nuc029lee.step / nuc029lee.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Nuvoton Tech datasheet (82 pp, sha256 7349c9a429e4d098, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF