3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNUC029LEE
Nuvoton Tech · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)
NUC029LEE from Nuvoton Tech, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VBAT | power_in | Power supply by batteries for RTC. |
| 2 | X32_OUT | output | External 32.768 kHz (low speed) crystal output pin. |
| 3 | X32_IN | input | External 32.768 kHz (low speed) crystal input pin. |
| 4 | PA.11 | bidirectional | General purpose digital I/O pin; alternate functions are I2C1_SCL (I2C1 clock pin) and nRD (EBI read enable output pin). |
| 5 | PA.10 | bidirectional | General purpose digital I/O pin; alternate functions are I2C1_SDA (I2C1 data input/output pin) and nWR (EBI write enable output pin). |
| 6 | PA.9 | bidirectional | General purpose digital I/O pin; alternate function I2C0_SCL (I2C0 clock pin). |
| 7 | PA.8 | bidirectional | General purpose digital I/O pin; alternate function I2C0_SDA (I2C0 data input/output pin). |
| 8 | PB.4 | bidirectional | General purpose digital I/O pin; alternate function UART1_RXD (data receiver input pin for UART1). |
| 9 | PB.5 | bidirectional | General purpose digital I/O pin; alternate function UART1_TXD (data transmitter output pin for UART1). |
| 10 | LDO_CAP | power_out | LDO output pin. |
| 11 | VDD | power_in | Power supply for I/O ports and LDO source for internal PLL and digital circuit. |
| 12 | VSS | power_in | Ground pin for digital circuit. |
| 13 | USB_VBUS | power_in | Power supply from USB host or HUB. |
| 14 | USB_VDD33_CAP | power_out | USB internal power regulator output 3.3V decoupling pin. |
| 15 | USB_D- | bidirectional | USB differential signal D-. |
| 16 | USB_D+ | bidirectional | USB differential signal D+. |
| 17 | PB.0 | bidirectional | General purpose digital I/O pin; alternate function UART0_RXD (data receiver input pin for UART0). |
| 18 | PB.1 | bidirectional | General purpose digital I/O pin; alternate function UART0_TXD (data transmitter output pin for UART0). |
| 19 | PB.2 | bidirectional | General purpose digital I/O pin; alternate functions are UART0_nRTS (request to send output), TM2_EXT, TM2 and nWRL (EBI low byte write enable output). |
| 20 | PB.3 | bidirectional | General purpose digital I/O pin; alternate functions are UART0_nCTS (clear to send input), TM3_EXT, TM3 and nWRH (EBI high byte write enable output). |
| 21 | PC.3 | bidirectional | General purpose digital I/O pin; alternate function SPI0_MOSI0 (SPI0 master out, slave in pin). |
| 22 | PC.2 | bidirectional | General purpose digital I/O pin; alternate function SPI0_MISO0 (SPI0 master in, slave out pin). |
| 23 | PC.1 | bidirectional | General purpose digital I/O pin; alternate function SPI0_CLK (SPI0 serial clock pin). |
| 24 | PC.0 | bidirectional | General purpose digital I/O pin; alternate function SPI0_SS0 (SPI0 slave select pin). |
| 25 | PA.15 | bidirectional | General purpose digital I/O pin; alternate function PWM3 (PWM3 output/capture input). |
| 26 | PA.14 | bidirectional | General purpose digital I/O pin; alternate functions are PWM2 (PWM2 output/capture input) and AD15 (EBI address/data bus bit15). |
| 27 | PA.13 | bidirectional | General purpose digital I/O pin; alternate functions are PWM1 (PWM1 output/capture input) and AD14 (EBI address/data bus bit14). |
| 28 | PA.12 | bidirectional | General purpose digital I/O pin; alternate functions are PWM0 (PWM0 output/capture input) and AD13 (EBI address/data bus bit13). |
| 29 | ICE_DAT | bidirectional | Serial wire debugger data pin. |
| 30 | ICE_CLK | input | Serial wire debugger clock pin. |
| 31 | AVSS | power_in | Ground pin for analog circuit. |
| 32 | PA.0 | bidirectional | General purpose digital I/O pin; alternate function ADC0 (ADC0 analog input). |
| 33 | PA.1 | bidirectional | General purpose digital I/O pin; alternate functions are ADC1 (ADC1 analog input) and AD12 (EBI address/data bus bit12). |
| 34 | PA.2 | bidirectional | General purpose digital I/O pin; alternate functions are ADC2 (ADC2 analog input) and AD11 (EBI address/data bus bit11). |
| 35 | PA.3 | bidirectional | General purpose digital I/O pin; alternate functions are ADC3 (ADC3 analog input) and AD10 (EBI address/data bus bit10). |
| 36 | PA.4 | bidirectional | General purpose digital I/O pin; alternate functions are ADC4 (ADC4 analog input) and AD9 (EBI address/data bus bit9). |
| 37 | PA.5 | bidirectional | General purpose digital I/O pin; alternate functions are ADC5 (ADC5 analog input) and AD8 (EBI address/data bus bit8). |
| 38 | PA.6 | bidirectional | General purpose digital I/O pin; alternate functions are ADC6 (ADC6 analog input) and AD7 (EBI address/data bus bit7). |
| 39 | VREF | power_in | Voltage reference input for ADC. |
| 40 | AVDD | power_in | Power supply for internal analog circuit. |
| 41 | PC.7 | bidirectional | General purpose digital I/O pin; alternate functions are ADC7 (ADC7 analog input) and AD5 (EBI address/data bus bit5). |
| 42 | PC.6 | bidirectional | General purpose digital I/O pin; alternate functions are ADC8 (ADC8 analog input) and AD4 (EBI address/data bus bit4). |
| 43 | PB.15 | bidirectional | General purpose digital I/O pin; alternate functions include INT1 (external interrupt1 input), TM0_EXT, TM0, ADC11 (analog input) and AD6 (EBI address/data bus bit6). |
| 44 | PF.0 | bidirectional | General purpose digital I/O pin; alternate function XT1_OUT (external 4~24 MHz high speed crystal output pin). |
| 45 | PF.1 | bidirectional | General purpose digital I/O pin; alternate function XT1_IN (external 4~24 MHz high speed crystal input pin). |
| 46 | nRESET | input | External reset input: active LOW, with an internal pull-up; setting this pin low resets the chip to initial state. |
| 47 | PVSS | power_in | PLL ground. |
| 48 | PB.8 | bidirectional | General purpose digital I/O pin; alternate functions include STADC (ADC external trigger input), TM0 and CLKO (frequency divider clock output pin). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nuvoton Tech |
| Package | LQFP-48(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Power Supply | VDD | -0.3 | 7 | V | 60 | ||
| Oscillator Frequency | 1/tCLCL | 4 | 24 | MHz | 60 | ||
| Operating Temperature | TA | -40 | 105 | C | 60 | ||
| Junction temperature | TJ | -40 | 125 | C | 60 | ||
| Storage Temperature | TST | -55 | 150 | C | 60 | ||
| Maximum Current into VDD | 120 | mA | 60 | ||||
| Maximum Current out of VSS | 120 | mA | 60 | ||||
| Maximum Current sunk by a I/O pin | 35 | mA | 60 | ||||
| Maximum Current sourced by a I/O pin | 35 | mA | 60 | ||||
| Maximum Current sunk by total I/O pins | 100 | mA | 60 | ||||
| Maximum Current sourced by total I/O pins | 100 | mA | 60 | ||||
| Operation Voltage | VDD | 2.5 | 5.5 | V | VDD = 2.5V ~ 5.5V up to 72 MHz | 62 | |
| RTC Operation voltage for PF.0~PF.2 | VBAT | 2.5 | 5.5 | V | 62 | ||
| LDO Output Voltage | VLDO | 1.62 | 1.8 | 1.98 | V | VDD ≥ 2.5V | 62 |
| Band-gap Voltage | VBG | 1.21 | 1.29 | V | VDD = 2.5 V ~ 5.5 V, TA = -40C~105C | 62 | |
| Allowed voltage difference for VDD and AVDD | VDD-AVDD | -0.3 | 0.3 | V | 62 | ||
| Calibrated Internal Oscillator Frequency (22.1184 MHz HIRC) | fHRC | -1 | 1 | % | TA = 25 ℃ VDD = 5 V | 69 | |
| Calibrated Internal Oscillator Frequency (22.1184 MHz HIRC) | fHRC | -3 | 3 | % | TA = -40 ℃ ~ 105 ℃ VDD = 2.5 V ~ 5.5 V | 69 | |
| Supply Voltage (22.1184 MHz HIRC) | VHRC | 1.62 | 1.8 | 1.98 | V | 69 | |
| Calibrated Internal Oscillator Frequency (48 MHz HIRC) | fHRC | -1 | 1 | % | TA = 25 ℃ VDD = 5 V | 69 | |
| Calibrated Internal Oscillator Frequency (48 MHz HIRC) | fHRC | -2 | 2 | % | TA = -40 ℃ ~ 105 ℃ VDD = 2.5 V ~ 5.5 V | 69 | |
| Supply Voltage (48 MHz HIRC) | VHRC | 1.62 | 1.8 | 1.98 | V | 69 | |
| Oscillator Frequency (10 kHz LRC) | fLRC | -10 | 10 | % | VDD = 2.5 V ~ 5.5 V TA = 25℃ | 70 | |
| Oscillator Frequency (10 kHz LRC) | fLRC | -50 | 50 | % | VDD = 2.5 V ~ 5.5 V TA = -40℃ ~ +105℃ | 70 | |
| Supply Voltage (10 kHz LRC) | VLRC | 2.5 | 5.5 | V | 70 | ||
| Operation Voltage (HXT crystal) | VHXT | 2.5 | 5.5 | V | 67 | ||
| Temperature (HXT crystal) | TA | -40 | 105 | ℃ | 67 | ||
| Clock Frequency (HXT crystal) | fHXT | 4 | 24 | MHz | 67 | ||
| Operation Voltage (LXT) | VDD | 2.5 | 5.5 | V | 68 | ||
| Operation Temperature (LXT) | TA | -40 | 105 | ℃ | 68 | ||
| Clock High Time | tCHCX | 10 | ns | 67 | |||
| Clock Low Time | tCLCX | 10 | ns | 67 | |||
| Clock Rise Time | tCLCH | 2 | 15 | ns | 67 | ||
| Clock Fall Time | tCHCL | 2 | 15 | ns | 67 | ||
| PLL input clock | fPLL_IN | 4 | 24 | MHz | 70 | ||
| PLL multiplier output clock | fPLL_OUT | 50 | 500 | MHz | 70 | ||
| Supply Voltage (SARADC AVDD) | AVDD | 2.5 | 5.5 | V | 71 | ||
| Differential Nonlinearity Error | DNL | -3 | 3 | LSB | 71 | ||
| Integral Nonlinearity Error | INL | -4 | 4 | LSB | 71 | ||
| ADC Clock Frequency | FADC | 21 | MHz | 71 | |||
| Sample Rate | FS | 1000 | kSPS | 71 | |||
| Temperature Sensor Gain | -1.55 | -1.672 | -1.75 | mV/℃ | 74 | ||
| Temperature Sensor Offset | Vos | 735 | 748 | 755 | mV | TA = 0 ℃ | 74 |
| Temperature Sensor operating temperature | TA | -40 | 105 | ℃ | 74 | ||
| Input High (driven) | VIH | 2 | V | 75 | |||
| Input Low | VIL | 0.8 | V | 75 | |||
| Differential Input Sensitivity | VDI | 0.2 | V | /PADP-PADM/ | 75 | ||
| Differential Common-mode Range | VCM | 0.8 | 2.5 | V | Includes VDI range | 75 | |
| Single-ended Receiver Threshold | VSE | 0.8 | 2 | V | 75 | ||
| Output Low (driven) | VOL | 0 | 0.3 | V | 75 | ||
| Output High (driven) | VOH | 2.8 | 3.6 | V | 75 | ||
| Output Signal Cross Voltage | VCRS | 1.3 | 2 | V | 75 | ||
| Pull-up Resistor | RPU | 1.425 | 1.575 | kΩ | 75 | ||
| Transceiver Capacitance | CIN | 20 | pF | Pin to GND | 75 | ||
| Rise Time | TFR | 4 | 20 | ns | CL=50p | 75 | |
| Fall Time | TFF | 4 | 20 | ns | CL=50p | 75 | |
| Rise and Fall Time Matching | TFRFF | 90 | 111.11 | % | TFRFF=TFR/TFF | 75 | |
| VBUS Pin Input Voltage | VBUS | 4 | 5 | 5.5 | V | 75 | |
| LDO Output Voltage (USB) | VDD33 | 2.97 | 3.3 | 3.63 | V | 75 | |
| Supply Voltage (Flash) | VFLA | 1.62 | 1.8 | 1.98 | V | 76 |
CAD (KiCad official)
- Symbol:
NUC029LEE - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
nuc029lee-etched.step/nuc029lee-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);nuc029lee.step/nuc029lee.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nuvoton Tech datasheet (82 pp, sha256
7349c9a429e4d098, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).