Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PT6988B

PTC(Princeton Tech) · LED Drivers · ESOP-8

PT6988B from PTC(Princeton Tech), in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Chip ground.
2 SET input LED open-circuit protection voltage setting pin, set by connecting a resistor to ground (VSET typically 1.5V, absolute max -0.3 to 6V).
3 VDD power_in Hold-up supply pin for the internal dimming latch, with an external capacitor (about 1µF gives roughly 0.6s hold time).
4 VIN power_in Chip supply pin, start threshold 16V, UVLO 9V, clamped at 16.8V, absolute max 18V.
5 DRN passive Drain of the internal 500V power MOSFET (absolute max -0.3 to 500V), pins 5 and 6 are tied together.
6 DRN passive Drain of the internal 500V power MOSFET (absolute max -0.3 to 500V), pins 5 and 6 are tied together.
7 CS input Current sense pin that detects the inductor peak current while the power MOSFET is on (400mV threshold, 150mV in third dimming stage, absolute max -0.3 to 6V).
8 CS input Current sense pin that detects the inductor peak current while the power MOSFET is on (400mV threshold, 150mV in third dimming stage, absolute max -0.3 to 6V).
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer PTC(Princeton Tech)
Package ESOP-8
Category Display Modules / LED Drivers / Display Drivers
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Internal reference voltage VREF 388 400 412 mV Ta=25℃, VIN=15V 8
Input voltage VIN 18 V 7
VIN maximum supply current IVIN 5 mA 7
DRN pin output voltage VDRN -0.3 500 V 7
SET pin input voltage VSET -0.3 6 V 7
CS pin input voltage VCS -0.3 6 V 7
Power dissipation PTotal 0.45 W 7
Operating temperature range TOP -40 150 ℃ 7
Storage temperature range TST -40 150 ℃ 7
ESD level ESD 2 kV 7
LED current, PT6988B-S ILED 130 mA Input 176V~265V, output voltage 140V 7
LED current, PT6988B-S ILED 180 mA Input 176V~265V, output voltage 80V 7
Minimum output LED voltage, PT6988B-S VLEDMIN 15 V >15 7
VIN start-up voltage VST 16 V VVIN rising 8
VIN undervoltage lockout VSD 9 V VVIN falling 8
VIN clamp voltage VCLAMP 16.8 V IVIN=1mA 8
VIN start-up current IST 180 μA VVIN= VST -1V 8
VIN operating current IOP 125 μA FOSC=70KHz 8
VDD start-up voltage VVDD_ON 3.3 V 8
VDD reset voltage VVDD_OFF 2.7 V 8
VDD current IDD 5 μA 8
Peak current detection threshold 1 VCS1 400 mV 8
Peak current detection threshold 2 VCS2 150 mV ON/OFF third stage 8
Peak current detection threshold at LED short VCS_SHORT 150 mV LED short 8
Current sense leading edge blanking time TLEB 350 ns 8
Chip turn-off delay TDELAY 200 ns 8
Maximum demagnetization time TDIS_MAX 280 μs 8
Minimum demagnetization time TDIS_BLK 5 μs 8
Maximum on time TON_MAX 55 μs 8
Power MOSFET on-resistance (PT6988B) RON 10 Ω VGS=15V/IDS=0.5A 8
Power MOSFET leakage current ILEAK 1 μA VGS=0V/ VDS=500V 8
Power MOSFET breakdown voltage BVDSS 500 V VGS=0V/IDS=0.5A 8
SET pin voltage VSET 1.5 V 8
Over-temperature soft shutdown start temperature TSTR 145 ℃ 8
Over-temperature soft shutdown end temperature TZ 165 ℃ 8

CAD (KiCad official)

  • Symbol: PT6988B
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm
  • 3D model: ESOP-8 (KiCad packages3D, STEP)
  • 3D model files: pt6988b-etched.step / pt6988b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pt6988b.step / pt6988b.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PTC(Princeton Tech) datasheet (10 pp, sha256 de6317771e3221df, retrieved 2026-10-26, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF