Generated by kicad-footprint-generator · KiCad file format 20260206
PT6988B
PTC(Princeton Tech) · LED Drivers · ESOP-8
PT6988B from PTC(Princeton Tech), in a ESOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Chip ground. |
| 2 | SET | input | LED open-circuit protection voltage setting pin, set by connecting a resistor to ground (VSET typically 1.5V, absolute max -0.3 to 6V). |
| 3 | VDD | power_in | Hold-up supply pin for the internal dimming latch, with an external capacitor (about 1µF gives roughly 0.6s hold time). |
| 4 | VIN | power_in | Chip supply pin, start threshold 16V, UVLO 9V, clamped at 16.8V, absolute max 18V. |
| 5 | DRN | passive | Drain of the internal 500V power MOSFET (absolute max -0.3 to 500V), pins 5 and 6 are tied together. |
| 6 | DRN | passive | Drain of the internal 500V power MOSFET (absolute max -0.3 to 500V), pins 5 and 6 are tied together. |
| 7 | CS | input | Current sense pin that detects the inductor peak current while the power MOSFET is on (400mV threshold, 150mV in third dimming stage, absolute max -0.3 to 6V). |
| 8 | CS | input | Current sense pin that detects the inductor peak current while the power MOSFET is on (400mV threshold, 150mV in third dimming stage, absolute max -0.3 to 6V). |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PTC(Princeton Tech) |
| Package | ESOP-8 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Internal reference voltage | VREF | 388 | 400 | 412 | mV | Ta=25℃, VIN=15V | 8 |
| Input voltage | VIN | 18 | V | 7 | |||
| VIN maximum supply current | IVIN | 5 | mA | 7 | |||
| DRN pin output voltage | VDRN | -0.3 | 500 | V | 7 | ||
| SET pin input voltage | VSET | -0.3 | 6 | V | 7 | ||
| CS pin input voltage | VCS | -0.3 | 6 | V | 7 | ||
| Power dissipation | PTotal | 0.45 | W | 7 | |||
| Operating temperature range | TOP | -40 | 150 | ℃ | 7 | ||
| Storage temperature range | TST | -40 | 150 | ℃ | 7 | ||
| ESD level | ESD | 2 | kV | 7 | |||
| LED current, PT6988B-S | ILED | 130 | mA | Input 176V~265V, output voltage 140V | 7 | ||
| LED current, PT6988B-S | ILED | 180 | mA | Input 176V~265V, output voltage 80V | 7 | ||
| Minimum output LED voltage, PT6988B-S | VLEDMIN | 15 | V | >15 | 7 | ||
| VIN start-up voltage | VST | 16 | V | VVIN rising | 8 | ||
| VIN undervoltage lockout | VSD | 9 | V | VVIN falling | 8 | ||
| VIN clamp voltage | VCLAMP | 16.8 | V | IVIN=1mA | 8 | ||
| VIN start-up current | IST | 180 | μA | VVIN= VST -1V | 8 | ||
| VIN operating current | IOP | 125 | μA | FOSC=70KHz | 8 | ||
| VDD start-up voltage | VVDD_ON | 3.3 | V | 8 | |||
| VDD reset voltage | VVDD_OFF | 2.7 | V | 8 | |||
| VDD current | IDD | 5 | μA | 8 | |||
| Peak current detection threshold 1 | VCS1 | 400 | mV | 8 | |||
| Peak current detection threshold 2 | VCS2 | 150 | mV | ON/OFF third stage | 8 | ||
| Peak current detection threshold at LED short | VCS_SHORT | 150 | mV | LED short | 8 | ||
| Current sense leading edge blanking time | TLEB | 350 | ns | 8 | |||
| Chip turn-off delay | TDELAY | 200 | ns | 8 | |||
| Maximum demagnetization time | TDIS_MAX | 280 | μs | 8 | |||
| Minimum demagnetization time | TDIS_BLK | 5 | μs | 8 | |||
| Maximum on time | TON_MAX | 55 | μs | 8 | |||
| Power MOSFET on-resistance (PT6988B) | RON | 10 | Ω | VGS=15V/IDS=0.5A | 8 | ||
| Power MOSFET leakage current | ILEAK | 1 | μA | VGS=0V/ VDS=500V | 8 | ||
| Power MOSFET breakdown voltage | BVDSS | 500 | V | VGS=0V/IDS=0.5A | 8 | ||
| SET pin voltage | VSET | 1.5 | V | 8 | |||
| Over-temperature soft shutdown start temperature | TSTR | 145 | ℃ | 8 | |||
| Over-temperature soft shutdown end temperature | TZ | 165 | ℃ | 8 |
CAD (KiCad official)
- Symbol:
PT6988B - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm - 3D model: ESOP-8 (KiCad packages3D, STEP)
- 3D model files:
pt6988b-etched.step/pt6988b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pt6988b.step/pt6988b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PTC(Princeton Tech) datasheet (10 pp, sha256
de6317771e3221df, retrieved 2026-10-26, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).