Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ST3222EBTR

STMicroelectronics · RS232 ICs · TSSOP-20

ST3222EBTR from STMicroelectronics, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Receiver enable control: drive low for normal operation, and drive high to force the receiver outputs (R_OUT) into a high-impedance state.
2 C1+ passive Positive terminal for the first charge pump capacitor (0.1 µF per Table 11 for 3.0 to 3.6 V operation).
3 V+ power_out Doubled-voltage terminal generated by the charge pump at 5.5 V nominal; absolute maximum (VCC - 0.3) to 7 V.
4 C1- passive Negative terminal for the first charge pump capacitor.
5 C2+ passive Positive terminal for the second charge pump capacitor.
6 C2- passive Negative terminal for the second charge pump capacitor.
7 V- power_out Inverted-voltage terminal generated by the charge pump at -5.5 V nominal; absolute maximum 0.3 to -7 V.
8 T2OUT output Second transmitter (RS-232) output; transmitter output voltage range is ±13.2 V absolute maximum.
9 R2IN input Second receiver (RS-232) input; receiver input voltage range is ±25 V.
10 R2OUT output Second receiver logic output; receiver output range is -0.3 V to (VCC + 0.3) V.
11 NC unconnected Not connected.
12 T2IN input Second transmitter logic input; transmitter input voltage range is -0.3 V to 6 V.
13 T1IN input First transmitter logic input; transmitter input voltage range is -0.3 V to 6 V.
14 NC unconnected Not connected.
15 R1OUT output First receiver logic output; receiver output range is -0.3 V to (VCC + 0.3) V.
16 R1IN input First receiver (RS-232) input; receiver input voltage range is ±25 V.
17 T1OUT output First transmitter (RS-232) output; transmitter output voltage range is ±13.2 V absolute maximum.
18 GND power_in Ground reference for the device.
19 VCC power_in Supply voltage, 3 V to 5.5 V operating; absolute maximum -0.3 V to 6 V.
20 SHDN input Active-low shutdown control: drive low to shut down the transmitters and charge pump.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-20
Category Interface
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC supply voltage VCC -0.3 6 V 4
Doubled voltage terminal V+ 7 V 4
Inverted voltage terminal V- -7 0.3 V 4
V+ + /V-/ V+ +/V-/ 13 V 4
Transmitter input voltage range TIN -0.3 6 V 4
Receiver input voltage range RIN -25 25 V 4
Transmitter output voltage range TOUT -13.2 13.2 V 4
Receiver output voltage range ROUT -0.3 V 4
Supply current ISUPPLY 0.3 1 mA No load, SHDN = VCC, TA = 25°C 5
Shutdown supply current ISHDN 1 10 µA No load, SHDN = VCC, TA = 25°C 5
Input logic threshold low VIL 0.8 V T-IN, EN, SHDN (Note: 1) 5
Input logic threshold high VIH 2 V VCC = 3.3 V 5
Input logic threshold high VIH 2.4 V VCC = 5 V 5
Input leakage current IIL -1 0.01 1 µA T-IN, EN, SHDN 5
Output voltage swing VTOUT -5 5.4 5 V All transmitter outputs are loaded with 3 KΩ to GND 5
Output short circuit current ITSC -60 60 mA 5
Output leakage current (transmitters disabled) ITOL -25 25 µA VCC = 0 or 3 V to 3.6 V, VOUT = ± 12 V Transmitters disable 5
Output leakage current IOL -10 0.05 10 µA R-OUT, EN = VCC, receiver disabled 6
Receiver input voltage operating range VRIN -25 25 V 6
Input threshold low VRIL 0.6 1.2 V TA = 25°C, VCC = 3.3 V 6
Input threshold low VRIL 0.8 1.5 V TA = 25°C, VCC = 5 V 6
Input threshold high VRIH 1.5 2.4 V TA = 25°C, VCC = 3.3 V 6
Input threshold high VRIH 1.8 2.4 V TA = 25°C, VCC = 5 V 6
Receiver input resistance RRIN 3 5 7 KΩ TA = 25°C 6
Output voltage low VROL 0.4 V IOUT = 1.6 mA 6
Data transfer rate DR 250 Kbps RL = 3 KΩ, CL2= 1000 pF one transmitter switching 6
Transmitter propagation delay difference /tPHLT - tTHL/ 200 ns 6
Receiver output enable time tOER 50 ns Normal operation 6
Receiver output disable time tODR 50 ns Normal operation 6
Receiver propagation delay difference /tPHLR - tTHR/ 50 ns 6
Transition slew rate SRT 6 30 V/µs TA = 25°C RL = 3 KΩ to 7 KΩ VCC = 3.3 V measured from +3V to -3V or -3V to +3V CL = 150 pF to 1000 pF 6
Transition slew rate SRT 4 30 V/µs TA = 25°C RL = 3 KΩ to 7 KΩ VCC = 3.3 V measured from +3V to -3V or -3V to +3V CL = 150 pF to 2500 pF 6
Propagation delay input to output tPHLR / tPLHR 0.15 µs RXIN to RXOUT, CL = 150 pF 6
ESD protection voltage (human body model) ESD -15 15 kV Human body model 4
ESD protection voltage (IEC-1000-4-2) ESD -8 8 kV IEC-1000-4-2 4
VCC supply voltage operating range VCC 3 5.5 V Electrical characteristics range, Tables 6-10 5
Operating ambient temperature range (ST3222EB) TA -40 85 °C Electrical characteristics range, Tables 6-10 5

CAD (KiCad official)

  • Symbol: ST3222EBTR
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20 (KiCad packages3D, STEP)
  • 3D model files: st3222ebtr-etched.step / st3222ebtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); st3222ebtr.step / st3222ebtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (15 pp, sha256 44dee6849d8a2f22, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF