3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownST3222EBTR
STMicroelectronics · RS232 ICs · TSSOP-20
ST3222EBTR from STMicroelectronics, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Receiver enable control: drive low for normal operation, and drive high to force the receiver outputs (R_OUT) into a high-impedance state. |
| 2 | C1+ | passive | Positive terminal for the first charge pump capacitor (0.1 µF per Table 11 for 3.0 to 3.6 V operation). |
| 3 | V+ | power_out | Doubled-voltage terminal generated by the charge pump at 5.5 V nominal; absolute maximum (VCC - 0.3) to 7 V. |
| 4 | C1- | passive | Negative terminal for the first charge pump capacitor. |
| 5 | C2+ | passive | Positive terminal for the second charge pump capacitor. |
| 6 | C2- | passive | Negative terminal for the second charge pump capacitor. |
| 7 | V- | power_out | Inverted-voltage terminal generated by the charge pump at -5.5 V nominal; absolute maximum 0.3 to -7 V. |
| 8 | T2OUT | output | Second transmitter (RS-232) output; transmitter output voltage range is ±13.2 V absolute maximum. |
| 9 | R2IN | input | Second receiver (RS-232) input; receiver input voltage range is ±25 V. |
| 10 | R2OUT | output | Second receiver logic output; receiver output range is -0.3 V to (VCC + 0.3) V. |
| 11 | NC | unconnected | Not connected. |
| 12 | T2IN | input | Second transmitter logic input; transmitter input voltage range is -0.3 V to 6 V. |
| 13 | T1IN | input | First transmitter logic input; transmitter input voltage range is -0.3 V to 6 V. |
| 14 | NC | unconnected | Not connected. |
| 15 | R1OUT | output | First receiver logic output; receiver output range is -0.3 V to (VCC + 0.3) V. |
| 16 | R1IN | input | First receiver (RS-232) input; receiver input voltage range is ±25 V. |
| 17 | T1OUT | output | First transmitter (RS-232) output; transmitter output voltage range is ±13.2 V absolute maximum. |
| 18 | GND | power_in | Ground reference for the device. |
| 19 | VCC | power_in | Supply voltage, 3 V to 5.5 V operating; absolute maximum -0.3 V to 6 V. |
| 20 | SHDN | input | Active-low shutdown control: drive low to shut down the transmitters and charge pump. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-20 |
| Category | Interface |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC supply voltage | VCC | -0.3 | 6 | V | 4 | ||
| Doubled voltage terminal | V+ | 7 | V | 4 | |||
| Inverted voltage terminal | V- | -7 | 0.3 | V | 4 | ||
| V+ + /V-/ | V+ +/V-/ | 13 | V | 4 | |||
| Transmitter input voltage range | TIN | -0.3 | 6 | V | 4 | ||
| Receiver input voltage range | RIN | -25 | 25 | V | 4 | ||
| Transmitter output voltage range | TOUT | -13.2 | 13.2 | V | 4 | ||
| Receiver output voltage range | ROUT | -0.3 | V | 4 | |||
| Supply current | ISUPPLY | 0.3 | 1 | mA | No load, SHDN = VCC, TA = 25°C | 5 | |
| Shutdown supply current | ISHDN | 1 | 10 | µA | No load, SHDN = VCC, TA = 25°C | 5 | |
| Input logic threshold low | VIL | 0.8 | V | T-IN, EN, SHDN (Note: 1) | 5 | ||
| Input logic threshold high | VIH | 2 | V | VCC = 3.3 V | 5 | ||
| Input logic threshold high | VIH | 2.4 | V | VCC = 5 V | 5 | ||
| Input leakage current | IIL | -1 | 0.01 | 1 | µA | T-IN, EN, SHDN | 5 |
| Output voltage swing | VTOUT | -5 | 5.4 | 5 | V | All transmitter outputs are loaded with 3 KΩ to GND | 5 |
| Output short circuit current | ITSC | -60 | 60 | mA | 5 | ||
| Output leakage current (transmitters disabled) | ITOL | -25 | 25 | µA | VCC = 0 or 3 V to 3.6 V, VOUT = ± 12 V Transmitters disable | 5 | |
| Output leakage current | IOL | -10 | 0.05 | 10 | µA | R-OUT, EN = VCC, receiver disabled | 6 |
| Receiver input voltage operating range | VRIN | -25 | 25 | V | 6 | ||
| Input threshold low | VRIL | 0.6 | 1.2 | V | TA = 25°C, VCC = 3.3 V | 6 | |
| Input threshold low | VRIL | 0.8 | 1.5 | V | TA = 25°C, VCC = 5 V | 6 | |
| Input threshold high | VRIH | 1.5 | 2.4 | V | TA = 25°C, VCC = 3.3 V | 6 | |
| Input threshold high | VRIH | 1.8 | 2.4 | V | TA = 25°C, VCC = 5 V | 6 | |
| Receiver input resistance | RRIN | 3 | 5 | 7 | KΩ | TA = 25°C | 6 |
| Output voltage low | VROL | 0.4 | V | IOUT = 1.6 mA | 6 | ||
| Data transfer rate | DR | 250 | Kbps | RL = 3 KΩ, CL2= 1000 pF one transmitter switching | 6 | ||
| Transmitter propagation delay difference | /tPHLT - tTHL/ | 200 | ns | 6 | |||
| Receiver output enable time | tOER | 50 | ns | Normal operation | 6 | ||
| Receiver output disable time | tODR | 50 | ns | Normal operation | 6 | ||
| Receiver propagation delay difference | /tPHLR - tTHR/ | 50 | ns | 6 | |||
| Transition slew rate | SRT | 6 | 30 | V/µs | TA = 25°C RL = 3 KΩ to 7 KΩ VCC = 3.3 V measured from +3V to -3V or -3V to +3V CL = 150 pF to 1000 pF | 6 | |
| Transition slew rate | SRT | 4 | 30 | V/µs | TA = 25°C RL = 3 KΩ to 7 KΩ VCC = 3.3 V measured from +3V to -3V or -3V to +3V CL = 150 pF to 2500 pF | 6 | |
| Propagation delay input to output | tPHLR / tPLHR | 0.15 | µs | RXIN to RXOUT, CL = 150 pF | 6 | ||
| ESD protection voltage (human body model) | ESD | -15 | 15 | kV | Human body model | 4 | |
| ESD protection voltage (IEC-1000-4-2) | ESD | -8 | 8 | kV | IEC-1000-4-2 | 4 | |
| VCC supply voltage operating range | VCC | 3 | 5.5 | V | Electrical characteristics range, Tables 6-10 | 5 | |
| Operating ambient temperature range (ST3222EB) | TA | -40 | 85 | °C | Electrical characteristics range, Tables 6-10 | 5 |
CAD (KiCad official)
- Symbol:
ST3222EBTR - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
st3222ebtr-etched.step/st3222ebtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);st3222ebtr.step/st3222ebtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (15 pp, sha256
44dee6849d8a2f22, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).