Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2904WYDT

STMicroelectronics · Operational Amplifier · SOIC-8

LM2904WYDT from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Output A output Output of amplifier A, swinging from 0 V to (VCC+ - 1.5 V) with short-circuit current of about 40 mA.
2 Inverting input A input Inverting input of amplifier A, with input voltage range of -0.3 V to VCC + 0.3 V.
3 Non-inverting input A input Non-inverting input of amplifier A, with common-mode range including the negative rail and up to VCC+ - 1.5 V.
4 VCC- power_in Negative supply, connected to ground in single-supply operation.
5 Non-inverting input B input Non-inverting input of amplifier B, with common-mode range including the negative rail and up to VCC+ - 1.5 V.
6 Inverting input B input Inverting input of amplifier B, with input voltage range of -0.3 V to VCC + 0.3 V.
7 Output B output Output of amplifier B, swinging from 0 V to (VCC+ - 1.5 V) with short-circuit current of about 40 mA.
8 VCC+ power_in Positive supply, operating range 3 V to 30 V (absolute maximum +32 V).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage (Tamb = 25 °C, LM2904W) Vio 2 7 mV Tamb = 25 °C, VCC+ = 5 V, VCC- = Ground, VO = 1.4 V 6
Input offset voltage (Tmin ≤ Tamb ≤ Tmax, LM2904W) Vio 9 mV Tmin ≤ Tamb ≤ Tmax, VCC+ = 5 V, VCC- = Ground, VO = 1.4 V 6
Input offset current Iio 2 30 nA 6
Input offset current (Tmin ≤ Tamb ≤ Tmax) Iio 40 nA Tmin ≤ Tamb ≤ Tmax 6
Input bias current Iib 20 150 nA 6
Input bias current (Tmin ≤ Tamb ≤ Tmax) Iib 200 nA Tmin ≤ Tamb ≤ Tmax 6
Large signal voltage gain (25 °C) Avd 50 100 V/mV VCC+ = +15 V, RL = 2 kΩ, Vo = 1.4 V to 11.4 V 6
Large signal voltage gain (Tmin ≤ Tamb ≤ Tmax) Avd 25 V/mV VCC+ = +15 V, RL = 2 kΩ, Vo = 1.4 V to 11.4 V, Tmin ≤ Tamb ≤ Tmax 6
Supply voltage rejection ratio (25 °C) SVR 65 100 dB RS ≤ 10 kΩ 6
Supply voltage rejection ratio (Tmin ≤ Tamb ≤ Tmax) SVR 65 dB RS ≤ 10 kΩ, Tmin ≤ Tamb ≤ Tmax 6
Supply current, all amp, no load (VCC = +5 V) ICC 0.7 1.2 mA VCC = +5 V, no load 6
Supply current, all amp, no load (Tmin ≤ Tamb ≤ Tmax, VCC = +30 V) ICC 2 mA Tmin ≤ Tamb ≤ Tmax, VCC = +30 V, no load 6
Common-mode rejection ratio (25 °C) CMR 70 85 dB RS = 10 kΩ 6
Common-mode rejection ratio (Tmin ≤ Tamb ≤ Tmax) CMR 60 dB RS = 10 kΩ, Tmin ≤ Tamb ≤ Tmax 6
Output short-circuit current (source) Isource 20 40 60 mA VCC+ = +15 V, Vo = +2 V, Vid = +1 V 6
Output sink current (mA range) Isink 10 20 mA VO = 2 V, VCC+ = +5 V 6
Output sink current (µA range) Isink 12 50 µA VO = +0.2 V, VCC+ = +15 V 6
High level output voltage (RL = 2 kΩ) VOH 26 V VCC+ = +30 V, RL = 2 kΩ 6
High level output voltage (RL = 10 kΩ) VOH 27 V VCC+ = +30 V, RL = 10 kΩ 6
Low level output voltage (25 °C) VOL 5 20 mV RL = 10 kΩ 6
Low level output voltage (Tmin ≤ Tamb ≤ Tmax) VOL 20 mV RL = 10 kΩ, Tmin ≤ Tamb ≤ Tmax 6
Input offset voltage drift DVio 7 30 µV/°C 6
Input offset current drift DIio 10 300 pA/°C 6
Slew rate (25 °C) SR 0.3 0.6 V/µs VCC+ = 15 V, Vin = 0.5 to 3 V, RL = 2 kΩ, CL = 100 pF, unity gain 7
Slew rate (Tmin ≤ Tamb ≤ Tmax) SR 0.2 V/µs VCC+ = 15 V, Vin = 0.5 to 3 V, RL = 2 kΩ, CL = 100 pF, unity gain, Tmin ≤ Tamb ≤ Tmax 7
Gain bandwidth product GBP 0.7 1.1 MHz f = 100 kHz, VCC+ = 30 V, Vin = 10 mV, RL = 2 kΩ, CL = 100 pF 7
Total harmonic distortion THD 0.02 % f = 1 kHz, AV = 20 dB, RL = 2 kΩ, Vo = 2 Vpp, CL = 100 pF, VCC+ = 30 V 7
Equivalent input noise voltage en 55 nV/√Hz f = 1 kHz, RS = 100 Ω, VCC+ = 30 V 7
Channel separation VO1/VO2 120 dB 1 kHz ≤ f ≤ 20 kHz 7
Supply voltage VCC 3 30 V 5
Operating free-air temperature range Toper -40 125 °C 5
Supply voltage VCC 32 V Voltage values except differential are with respect to network ground terminal 4
Differential input voltage Vid -0.3 V Upper limit printed as VCC + 0.3 V 4
Input voltage Vin -0.3 V Upper limit printed as VCC + 0.3 V 4
Input current Iin 50 mA Input driven negative only 4
Storage temperature range Tstg -65 150 °C 4
Maximum junction temperature Tj 150 °C 4
ESD HBM (human body model) ESD HBM 2000 V 100 pF through 1.5 kΩ 4
ESD MM (machine model) ESD MM 200 V 200 pF, no series resistor 4
ESD CDM (charged device model) ESD CDM 1500 V All pins and package charged together 4
Thermal resistance junction to ambient (SO-8) Rthja 125 °C/W Typical value per footnote 5 4
Thermal resistance junction to case (SO-8) Rthjc 40 °C/W Typical value per footnote 5 4

CAD (KiCad official)

  • Symbol: LM2904WYDT
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm2904wydt-etched.step / lm2904wydt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2904wydt.step / lm2904wydt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (21 pp, sha256 961725457a691b29, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF