3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2904WYDT
STMicroelectronics · Operational Amplifier · SOIC-8
LM2904WYDT from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output A | output | Output of amplifier A, swinging from 0 V to (VCC+ - 1.5 V) with short-circuit current of about 40 mA. |
| 2 | Inverting input A | input | Inverting input of amplifier A, with input voltage range of -0.3 V to VCC + 0.3 V. |
| 3 | Non-inverting input A | input | Non-inverting input of amplifier A, with common-mode range including the negative rail and up to VCC+ - 1.5 V. |
| 4 | VCC- | power_in | Negative supply, connected to ground in single-supply operation. |
| 5 | Non-inverting input B | input | Non-inverting input of amplifier B, with common-mode range including the negative rail and up to VCC+ - 1.5 V. |
| 6 | Inverting input B | input | Inverting input of amplifier B, with input voltage range of -0.3 V to VCC + 0.3 V. |
| 7 | Output B | output | Output of amplifier B, swinging from 0 V to (VCC+ - 1.5 V) with short-circuit current of about 40 mA. |
| 8 | VCC+ | power_in | Positive supply, operating range 3 V to 30 V (absolute maximum +32 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (Tamb = 25 °C, LM2904W) | Vio | 2 | 7 | mV | Tamb = 25 °C, VCC+ = 5 V, VCC- = Ground, VO = 1.4 V | 6 | |
| Input offset voltage (Tmin ≤ Tamb ≤ Tmax, LM2904W) | Vio | 9 | mV | Tmin ≤ Tamb ≤ Tmax, VCC+ = 5 V, VCC- = Ground, VO = 1.4 V | 6 | ||
| Input offset current | Iio | 2 | 30 | nA | 6 | ||
| Input offset current (Tmin ≤ Tamb ≤ Tmax) | Iio | 40 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input bias current | Iib | 20 | 150 | nA | 6 | ||
| Input bias current (Tmin ≤ Tamb ≤ Tmax) | Iib | 200 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Large signal voltage gain (25 °C) | Avd | 50 | 100 | V/mV | VCC+ = +15 V, RL = 2 kΩ, Vo = 1.4 V to 11.4 V | 6 | |
| Large signal voltage gain (Tmin ≤ Tamb ≤ Tmax) | Avd | 25 | V/mV | VCC+ = +15 V, RL = 2 kΩ, Vo = 1.4 V to 11.4 V, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Supply voltage rejection ratio (25 °C) | SVR | 65 | 100 | dB | RS ≤ 10 kΩ | 6 | |
| Supply voltage rejection ratio (Tmin ≤ Tamb ≤ Tmax) | SVR | 65 | dB | RS ≤ 10 kΩ, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Supply current, all amp, no load (VCC = +5 V) | ICC | 0.7 | 1.2 | mA | VCC = +5 V, no load | 6 | |
| Supply current, all amp, no load (Tmin ≤ Tamb ≤ Tmax, VCC = +30 V) | ICC | 2 | mA | Tmin ≤ Tamb ≤ Tmax, VCC = +30 V, no load | 6 | ||
| Common-mode rejection ratio (25 °C) | CMR | 70 | 85 | dB | RS = 10 kΩ | 6 | |
| Common-mode rejection ratio (Tmin ≤ Tamb ≤ Tmax) | CMR | 60 | dB | RS = 10 kΩ, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Output short-circuit current (source) | Isource | 20 | 40 | 60 | mA | VCC+ = +15 V, Vo = +2 V, Vid = +1 V | 6 |
| Output sink current (mA range) | Isink | 10 | 20 | mA | VO = 2 V, VCC+ = +5 V | 6 | |
| Output sink current (µA range) | Isink | 12 | 50 | µA | VO = +0.2 V, VCC+ = +15 V | 6 | |
| High level output voltage (RL = 2 kΩ) | VOH | 26 | V | VCC+ = +30 V, RL = 2 kΩ | 6 | ||
| High level output voltage (RL = 10 kΩ) | VOH | 27 | V | VCC+ = +30 V, RL = 10 kΩ | 6 | ||
| Low level output voltage (25 °C) | VOL | 5 | 20 | mV | RL = 10 kΩ | 6 | |
| Low level output voltage (Tmin ≤ Tamb ≤ Tmax) | VOL | 20 | mV | RL = 10 kΩ, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input offset voltage drift | DVio | 7 | 30 | µV/°C | 6 | ||
| Input offset current drift | DIio | 10 | 300 | pA/°C | 6 | ||
| Slew rate (25 °C) | SR | 0.3 | 0.6 | V/µs | VCC+ = 15 V, Vin = 0.5 to 3 V, RL = 2 kΩ, CL = 100 pF, unity gain | 7 | |
| Slew rate (Tmin ≤ Tamb ≤ Tmax) | SR | 0.2 | V/µs | VCC+ = 15 V, Vin = 0.5 to 3 V, RL = 2 kΩ, CL = 100 pF, unity gain, Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Gain bandwidth product | GBP | 0.7 | 1.1 | MHz | f = 100 kHz, VCC+ = 30 V, Vin = 10 mV, RL = 2 kΩ, CL = 100 pF | 7 | |
| Total harmonic distortion | THD | 0.02 | % | f = 1 kHz, AV = 20 dB, RL = 2 kΩ, Vo = 2 Vpp, CL = 100 pF, VCC+ = 30 V | 7 | ||
| Equivalent input noise voltage | en | 55 | nV/√Hz | f = 1 kHz, RS = 100 Ω, VCC+ = 30 V | 7 | ||
| Channel separation | VO1/VO2 | 120 | dB | 1 kHz ≤ f ≤ 20 kHz | 7 | ||
| Supply voltage | VCC | 3 | 30 | V | 5 | ||
| Operating free-air temperature range | Toper | -40 | 125 | °C | 5 | ||
| Supply voltage | VCC | 32 | V | Voltage values except differential are with respect to network ground terminal | 4 | ||
| Differential input voltage | Vid | -0.3 | V | Upper limit printed as VCC + 0.3 V | 4 | ||
| Input voltage | Vin | -0.3 | V | Upper limit printed as VCC + 0.3 V | 4 | ||
| Input current | Iin | 50 | mA | Input driven negative only | 4 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Maximum junction temperature | Tj | 150 | °C | 4 | |||
| ESD HBM (human body model) | ESD HBM | 2000 | V | 100 pF through 1.5 kΩ | 4 | ||
| ESD MM (machine model) | ESD MM | 200 | V | 200 pF, no series resistor | 4 | ||
| ESD CDM (charged device model) | ESD CDM | 1500 | V | All pins and package charged together | 4 | ||
| Thermal resistance junction to ambient (SO-8) | Rthja | 125 | °C/W | Typical value per footnote 5 | 4 | ||
| Thermal resistance junction to case (SO-8) | Rthjc | 40 | °C/W | Typical value per footnote 5 | 4 |
CAD (KiCad official)
- Symbol:
LM2904WYDT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lm2904wydt-etched.step/lm2904wydt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2904wydt.step/lm2904wydt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (21 pp, sha256
961725457a691b29, retrieved 2026-10-01, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).