Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

IS32LT3183A-GRLA3-TR

ISSI(Integrated Silicon Solution) · LED Drivers · SOP-8-EP

IS32LT3183A-GRLA3-TR from ISSI(Integrated Silicon Solution), in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 HV0 bidirectional Multifunctional high-voltage I/O (configurable as LED current sink up to 60mA, GPIO, SPI or I2C master).
2 HV1 bidirectional Multifunctional high-voltage I/O (configurable as LED current sink up to 60mA, GPIO, SPI or I2C master).
3 HV2 bidirectional Multifunctional high-voltage I/O (configurable as LED current sink up to 60mA, GPIO, SPI or I2C master).
4 HV3 bidirectional Multifunctional high-voltage I/O (configurable as LED current sink up to 60mA, GPIO, SPI or I2C master).
5 GND power_in Power ground pin.
6 LIN_IN input Analogue high-voltage connection to the LIN bus, LIN bus shunt input.
7 LIN_OUT output Analogue high-voltage LIN bus shunt output.
8 VS power_in HV battery supply voltage (5.5V to 18V continuous); external protection against reverse polarity needed.
9 EP power_in Thermal pad, must be connected to GND.

Key specifications

Parameter Value
Manufacturer ISSI(Integrated Silicon Solution)
Package SOP-8-EP
Category Nixie Tube Driver/LED Driver
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage range VS 5.5 18 V 6
Ambient temperature TA -40 125 °C 6
Voltage at VS VS -0.3 44 V 5
Voltage at LIN_IN, LIN_OUT -30 40 V 5
Voltage at HV0-HV3 -0.3 44 V 5
Maximum junction temperature TJMAX 150 °C 5
Storage temperature range TSTG -65 150 °C 5
Operating temperature range TA=TJ -40 150 °C 5
Power dissipation PD(MAX) 2.84 W 5
ESD (HBM) -8 8 kV 5
ESD (CDM) -750 750 V 5
Thermal resistance junction to ambient θJA 44 °C/W 4-layer standard test PCB based on JESD 51-2A 5
Thermal resistance junction to thermal pad θJP 1.41 °C/W 4-layer standard test PCB based on JESD 51-2A 5
Normal mode working current INOM 10 15 mA All pins are inputs, R30K_EN=1 6
Sleep mode current ISLEEP 40 60 µA All pins are inputs, chip in Sleep mode; VS=12V, TA=25°C 6
Tolerance of RC oscillator ΔIOSC -5 5 % IOSC=16MHz 6
Under voltage level range VUV_RANGE_VS 4.5 5 5.5 V UVOVTRIM (TM_UV[2:0]) 000 (default) 6
Under voltage level range VUV_RANGE_VS 6.5 7 7.5 V UVOVTRIM (TM_UV[2:0]) 100 6
Under voltage level range VUV_RANGE_VS 8 8.5 9 V UVOVTRIM (TM_UV[2:0]) 111 6
Hysteresis for under voltage VHYST_UV_VS 0.1 1 V 6
Debouncing for under voltage tUV_VS 10 30 60 ms Note 4 6
Level for load dump Interrupt VLDH 29 31 33 V 6
Hysteresis for load dump Interrupt VHYST_LD 1 2.5 4 V 6
Ref voltage VREF 2.46 2.5 2.54 V 6
Differential nonlinearity DNL -5 5 LSB Note 4 6
Integral nonlinearity INL -8 8 LSB Note 4 6
Quantification error ADCERR -0.5 0.5 LSB 6
Min. conversion Time tCONV 8 µs For max. ADC input frequency = 4MHz (Note 4) 6
Leakage current in case HV0~HV3 are inputs ILEAKHVX -5 5 µA 7
ON-resistance of HVx ROUTLHVX 20 40 Ω VS=12V, HvxOD_EN=1, HV0~HV3=0.2V 7
Output current of HVx IOUTHVX 0 60 mA VS>5.5V 7
Min. headroom voltage VHR_MIN 0.9 1.2 V HVx current = 60mA, VS=12V 8
Min. headroom voltage VHR_MIN 0.6 0.8 V HVx current = 20mA, VS=12V 8
Output current of HVx relative error IOUT_ERRHVX -7 7 % 5.5V≤ VS ≤18V, 8mA< IOUT ≤60mA 8
Output current of HVx relative error IOUT_ERRHVX -10 10 % 5.5V≤ VS ≤18V, 4mA≤ IOUT ≤8mA 8
Monitor current IMON 1.8 2 2.4 mA R2MAEN= 1 8
Temperature accuracy TACC -10 10 °C Note 4 8
Pull up resistance bus, normal & standby mode RSLAVE 28 30 40 kΩ VS=12V, VLIN_IN=0V 9
Center point of receiver threshold VBUS_CNT 0.475 0.5 0.525 VS VBUS_CNT=(VBUSDOM+VBUSREC)/2 9
Receiver hysteresis VBUS_HYS 0.175 VS VBUS_HYS = (VBUSREC- VBUSDOM) 9
Receiver dominant voltage VBUSDOM 0.4 VS 9
Receiver recessive voltage VBUSREC 0.6 VS 9
Prop. Delay receiver symmetry tRX_SYM -2 2 µs tRX_PDF - tRX_PDR (Note 9) 9
Functional range LIN auto-addressing VS_RG 9 15 V 10
LIN slave pull up resistance RPU_LIN_SLAVE 28 30 40 kΩ 10
Vs Monitor Gain Gain 0.2 8

CAD (KiCad official)

  • Symbol: IS32LT3183A-GRLA3-TR
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: is32lt3183a-grla3-tr-etched.step / is32lt3183a-grla3-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is32lt3183a-grla3-tr.step / is32lt3183a-grla3-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ISSI(Integrated Silicon Solution) datasheet (86 pp, sha256 6af1ae2197914e5c, retrieved 2026-10-30, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF