3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownIS32LT3183A-GRLA3-TR
ISSI(Integrated Silicon Solution) · LED Drivers · SOP-8-EP
IS32LT3183A-GRLA3-TR from ISSI(Integrated Silicon Solution), in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HV0 | bidirectional | Multifunctional high-voltage I/O (configurable as LED current sink up to 60mA, GPIO, SPI or I2C master). |
| 2 | HV1 | bidirectional | Multifunctional high-voltage I/O (configurable as LED current sink up to 60mA, GPIO, SPI or I2C master). |
| 3 | HV2 | bidirectional | Multifunctional high-voltage I/O (configurable as LED current sink up to 60mA, GPIO, SPI or I2C master). |
| 4 | HV3 | bidirectional | Multifunctional high-voltage I/O (configurable as LED current sink up to 60mA, GPIO, SPI or I2C master). |
| 5 | GND | power_in | Power ground pin. |
| 6 | LIN_IN | input | Analogue high-voltage connection to the LIN bus, LIN bus shunt input. |
| 7 | LIN_OUT | output | Analogue high-voltage LIN bus shunt output. |
| 8 | VS | power_in | HV battery supply voltage (5.5V to 18V continuous); external protection against reverse polarity needed. |
| 9 | EP | power_in | Thermal pad, must be connected to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI(Integrated Silicon Solution) |
| Package | SOP-8-EP |
| Category | Nixie Tube Driver/LED Driver |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage range | VS | 5.5 | 18 | V | 6 | ||
| Ambient temperature | TA | -40 | 125 | °C | 6 | ||
| Voltage at VS | VS | -0.3 | 44 | V | 5 | ||
| Voltage at LIN_IN, LIN_OUT | -30 | 40 | V | 5 | |||
| Voltage at HV0-HV3 | -0.3 | 44 | V | 5 | |||
| Maximum junction temperature | TJMAX | 150 | °C | 5 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 5 | ||
| Operating temperature range | TA=TJ | -40 | 150 | °C | 5 | ||
| Power dissipation | PD(MAX) | 2.84 | W | 5 | |||
| ESD (HBM) | -8 | 8 | kV | 5 | |||
| ESD (CDM) | -750 | 750 | V | 5 | |||
| Thermal resistance junction to ambient | θJA | 44 | °C/W | 4-layer standard test PCB based on JESD 51-2A | 5 | ||
| Thermal resistance junction to thermal pad | θJP | 1.41 | °C/W | 4-layer standard test PCB based on JESD 51-2A | 5 | ||
| Normal mode working current | INOM | 10 | 15 | mA | All pins are inputs, R30K_EN=1 | 6 | |
| Sleep mode current | ISLEEP | 40 | 60 | µA | All pins are inputs, chip in Sleep mode; VS=12V, TA=25°C | 6 | |
| Tolerance of RC oscillator | ΔIOSC | -5 | 5 | % | IOSC=16MHz | 6 | |
| Under voltage level range | VUV_RANGE_VS | 4.5 | 5 | 5.5 | V | UVOVTRIM (TM_UV[2:0]) 000 (default) | 6 |
| Under voltage level range | VUV_RANGE_VS | 6.5 | 7 | 7.5 | V | UVOVTRIM (TM_UV[2:0]) 100 | 6 |
| Under voltage level range | VUV_RANGE_VS | 8 | 8.5 | 9 | V | UVOVTRIM (TM_UV[2:0]) 111 | 6 |
| Hysteresis for under voltage | VHYST_UV_VS | 0.1 | 1 | V | 6 | ||
| Debouncing for under voltage | tUV_VS | 10 | 30 | 60 | ms | Note 4 | 6 |
| Level for load dump Interrupt | VLDH | 29 | 31 | 33 | V | 6 | |
| Hysteresis for load dump Interrupt | VHYST_LD | 1 | 2.5 | 4 | V | 6 | |
| Ref voltage | VREF | 2.46 | 2.5 | 2.54 | V | 6 | |
| Differential nonlinearity | DNL | -5 | 5 | LSB | Note 4 | 6 | |
| Integral nonlinearity | INL | -8 | 8 | LSB | Note 4 | 6 | |
| Quantification error | ADCERR | -0.5 | 0.5 | LSB | 6 | ||
| Min. conversion Time | tCONV | 8 | µs | For max. ADC input frequency = 4MHz (Note 4) | 6 | ||
| Leakage current in case HV0~HV3 are inputs | ILEAKHVX | -5 | 5 | µA | 7 | ||
| ON-resistance of HVx | ROUTLHVX | 20 | 40 | Ω | VS=12V, HvxOD_EN=1, HV0~HV3=0.2V | 7 | |
| Output current of HVx | IOUTHVX | 0 | 60 | mA | VS>5.5V | 7 | |
| Min. headroom voltage | VHR_MIN | 0.9 | 1.2 | V | HVx current = 60mA, VS=12V | 8 | |
| Min. headroom voltage | VHR_MIN | 0.6 | 0.8 | V | HVx current = 20mA, VS=12V | 8 | |
| Output current of HVx relative error | IOUT_ERRHVX | -7 | 7 | % | 5.5V≤ VS ≤18V, 8mA< IOUT ≤60mA | 8 | |
| Output current of HVx relative error | IOUT_ERRHVX | -10 | 10 | % | 5.5V≤ VS ≤18V, 4mA≤ IOUT ≤8mA | 8 | |
| Monitor current | IMON | 1.8 | 2 | 2.4 | mA | R2MAEN= 1 | 8 |
| Temperature accuracy | TACC | -10 | 10 | °C | Note 4 | 8 | |
| Pull up resistance bus, normal & standby mode | RSLAVE | 28 | 30 | 40 | kΩ | VS=12V, VLIN_IN=0V | 9 |
| Center point of receiver threshold | VBUS_CNT | 0.475 | 0.5 | 0.525 | VS | VBUS_CNT=(VBUSDOM+VBUSREC)/2 | 9 |
| Receiver hysteresis | VBUS_HYS | 0.175 | VS | VBUS_HYS = (VBUSREC- VBUSDOM) | 9 | ||
| Receiver dominant voltage | VBUSDOM | 0.4 | VS | 9 | |||
| Receiver recessive voltage | VBUSREC | 0.6 | VS | 9 | |||
| Prop. Delay receiver symmetry | tRX_SYM | -2 | 2 | µs | tRX_PDF - tRX_PDR (Note 9) | 9 | |
| Functional range LIN auto-addressing | VS_RG | 9 | 15 | V | 10 | ||
| LIN slave pull up resistance | RPU_LIN_SLAVE | 28 | 30 | 40 | kΩ | 10 | |
| Vs Monitor Gain | Gain | 0.2 | 8 |
CAD (KiCad official)
- Symbol:
IS32LT3183A-GRLA3-TR - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
is32lt3183a-grla3-tr-etched.step/is32lt3183a-grla3-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is32lt3183a-grla3-tr.step/is32lt3183a-grla3-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ISSI(Integrated Silicon Solution) datasheet (86 pp, sha256
6af1ae2197914e5c, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).