component
OP162GSZ-REEL7
Public Made by Adomby adom
Analog Devices Precision Op Amps, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOP162GSZ-REEL7
Analog Devices · Precision Op Amps · SOIC-8
OP162GSZ-REEL7 from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NULL | passive | Offset null pin: a potentiometer (recommended 20 kΩ) can be connected between Pin 1 and Pin 8 for offset adjustment, and the wiper must go to VCC, never VEE, or the device can be damaged. |
| 2 | -IN A | input | Inverting input of amplifier A; the input voltage should be limited to ±6 V and the input current to less than 5 mA to avoid damage. |
| 3 | +IN A | input | Non-inverting input of amplifier A; the common-mode input range is 0 V to within 1 V of the positive supply, and the input voltage should be limited to ±6 V. |
| 4 | V- | power_in | Negative power supply; the device operates from single supplies as low as 2.7 V or dual supplies up to ±6 V. |
| 5 | NC | unconnected | No connect; the datasheet specifies no internal connection to this pin. |
| 6 | OUT A | output | Amplifier A output, which swings to within 60 mV of each supply rail at 5 mA load and is not short-circuit protected, so the output current must be kept within ±30 mA. |
| 7 | V+ | power_in | Positive power supply; single-supply operation is specified from 2.7 V to 12 V. |
| 8 | NULL | passive | Offset null pin: the second terminal for the optional offset-adjust potentiometer connected between Pin 1 and Pin 8. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (OP162G) | VOS | 45 | 325 | µV | OP162G, OP262G, OP462G | 3 | |
| Input Offset Voltage over temperature (OP162G) | VOS | 800 | µV | -40°C ≤ TA ≤ +125°C | 3 | ||
| Input Bias Current | IB | 360 | 600 | nA | 3 | ||
| Input Bias Current over temperature | IB | 650 | nA | -40°C ≤ TA ≤ +125°C | 3 | ||
| Input Offset Current | IOS | -25 | 2.5 | 25 | nA | 3 | |
| Input Offset Current over temperature | IOS | -40 | 40 | nA | -40°C ≤ TA ≤ +125°C | 3 | |
| Input Voltage Range | VCM | 0 | 4 | V | 3 | ||
| Common-Mode Rejection | CMRR | 70 | 110 | dB | 0 V ≤ VCM ≤ 4.0 V, -40°C ≤ TA ≤ +125°C | 3 | |
| Large Signal Voltage Gain | AVO | 30 | V/mV | RL = 2 kΩ, 0.5 ≤ VOUT ≤ 4.5 V | 3 | ||
| Large Signal Voltage Gain | AVO | 65 | 88 | V/mV | RL = 10 kΩ, 0.5 ≤ VOUT ≤ 4.5 V | 3 | |
| Large Signal Voltage Gain over temperature | AVO | 40 | V/mV | RL = 10 kΩ, -40°C ≤ TA ≤ +125°C | 3 | ||
| Long-Term Offset Voltage (G grade) | VOS | 600 | µV | G grade | 3 | ||
| Output Voltage Swing High | VOH | 4.95 | 4.99 | V | IL = 250 µA, -40°C ≤ TA ≤ +125°C | 3 | |
| Output Voltage Swing High | VOH | 4.85 | 4.94 | V | IL = 5 mA | 3 | |
| Output Voltage Swing Low | VOL | 14 | 50 | mV | IL = 250 µA, -40°C ≤ TA ≤ +125°C | 3 | |
| Output Voltage Swing Low | VOL | 65 | 150 | mV | IL = 5 mA | 3 | |
| Short-Circuit Current | ISC | -80 | 80 | mA | Short to ground | 3 | |
| Maximum Output Current | IOUT | -30 | 30 | mA | 3 | ||
| Power Supply Rejection Ratio | PSRR | 120 | dB | VS = 2.7 V to 7 V | 3 | ||
| Power Supply Rejection Ratio over temperature | PSRR | 90 | dB | -40°C ≤ TA ≤ +125°C | 3 | ||
| Supply Current/Amplifier (OP162) | ISY | 600 | 750 | µA | OP162, VOUT = 2.5 V | 3 | |
| Supply Current/Amplifier over temperature (OP162) | ISY | 1 | mA | -40°C ≤ TA ≤ +125°C | 3 | ||
| Slew Rate | SR | 10 | V/µs | 1 V < VOUT < 4 V, RL = 10 kΩ | 3 | ||
| Settling Time | tS | 540 | ns | To 0.1%, AV = -1, VO = 2 V step | 3 | ||
| Supply Voltage (absolute maximum, printed ±6 V) | VS | 6 | V | 6 | |||
| Input Voltage | VIN | 6 | V | For supply voltages greater than 6 V, input limited to ≤ supply voltage | 6 | ||
| Differential Input Voltage | VID | 0.6 | V | Input current limited to < 5 mA above 0.6 V | 6 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 6 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 6 | ||
| Junction Temperature Range | TJ | -65 | 150 | °C | 6 | ||
| Lead Temperature Range | TLEAD | 300 | °C | Soldering, 10 sec | 6 | ||
| Thermal Resistance, junction-to-ambient, 8-Lead SOIC (S) | θJA | 157 | °C/W | Device soldered in circuit board (SOIC) | 6 | ||
| Thermal Resistance, junction-to-case, 8-Lead SOIC (S) | θJC | 56 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
OP162GSZ-REEL7 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
op162gsz-reel7-etched.step/op162gsz-reel7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);op162gsz-reel7.step/op162gsz-reel7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
07ec7633d2004ae1, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).