Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX821UUS+T

Analog Devices / Maxim Integrated · Integrated Circuits (ICs) · TO-253-4, TO-253AA

MAX821UUS+T from Analog Devices / Maxim Integrated, in a TO-253-4, TO-253AA. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 GND power_in Ground reference for the supervisor, the return for the VCC supply and the RESET output.
2 RESET output Active-low reset output for the MAX821: it is low while VCC is below the reset threshold and stays low for the pin-selected reset timeout period after the reset condition ends, and it is guaranteed valid down to VCC = 1V.
3 SRT input Set Reset Timeout input: connect to GND for 1ms (max), to VCC for 20ms (min), or leave unconnected for 100ms (min) reset timeout delay, with SRT capacitance kept below 200pF in the unconnected 100ms mode.
4 VCC power_in Supply voltage monitored against the reset threshold, specified from 1V to 5.5V with absolute maximum of 6.0V relative to GND.

Key specifications

Parameter Value
Manufacturer Analog Devices / Maxim Integrated
Package TO-253-4, TO-253AA
Category Integrated Circuits (ICs)
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reset Threshold VTH 2.74 2.78 2.81 V TA = +25°C 2
Reset Threshold VTH 2.7 2.85 V TA = -40°C to +125°C 2
RESET Output Voltage (MAX821) VOL 0.3 V MAX821R/S/T/U only, ISINK = 1.2mA, VCC = VTH(MIN) 3
Reset Threshold Tempco 30 ppm/°C 2
VCC to Reset Delay 50 µs 2
Reset Active Timeout Period tRP 20 32 40 ms 2
Terminal Voltage VCC (with respect to GND) VCC -0.3 6 V with respect to GND 2
Input Current, VCC, SRT 20 mA 2
Output Current, RESET or RESET 20 mA 2
Operating Temperature Range TA -40 125 °C 2
Storage Temperature Range TSTG -65 160 °C 2
Lead Temperature (soldering, 10 sec) 300 °C soldering, 10 sec 2

CAD (Adom-generated)

  • Symbol: MAX821UUS+T
  • Footprint: Adom_Gen:Analog_Devices_Maxim_Integrated_MAX821_111452
  • 3D model: generated to fit the land (STEP)
  • 3D model files: max821uus-t-etched.step / max821uus-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max821uus-t.step / max821uus-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices / Maxim Integrated datasheet (7 pp, sha256 c57e11276c3b1c6e, retrieved 2026-11-19)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.

Datasheet PDF