3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX821UUS+T
Analog Devices / Maxim Integrated · Integrated Circuits (ICs) · TO-253-4, TO-253AA
MAX821UUS+T from Analog Devices / Maxim Integrated, in a TO-253-4, TO-253AA. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the supervisor, the return for the VCC supply and the RESET output. |
| 2 | RESET | output | Active-low reset output for the MAX821: it is low while VCC is below the reset threshold and stays low for the pin-selected reset timeout period after the reset condition ends, and it is guaranteed valid down to VCC = 1V. |
| 3 | SRT | input | Set Reset Timeout input: connect to GND for 1ms (max), to VCC for 20ms (min), or leave unconnected for 100ms (min) reset timeout delay, with SRT capacitance kept below 200pF in the unconnected 100ms mode. |
| 4 | VCC | power_in | Supply voltage monitored against the reset threshold, specified from 1V to 5.5V with absolute maximum of 6.0V relative to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices / Maxim Integrated |
| Package | TO-253-4, TO-253AA |
| Category | Integrated Circuits (ICs) |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reset Threshold | VTH | 2.74 | 2.78 | 2.81 | V | TA = +25°C | 2 |
| Reset Threshold | VTH | 2.7 | 2.85 | V | TA = -40°C to +125°C | 2 | |
| RESET Output Voltage (MAX821) | VOL | 0.3 | V | MAX821R/S/T/U only, ISINK = 1.2mA, VCC = VTH(MIN) | 3 | ||
| Reset Threshold Tempco | 30 | ppm/°C | 2 | ||||
| VCC to Reset Delay | 50 | µs | 2 | ||||
| Reset Active Timeout Period | tRP | 20 | 32 | 40 | ms | 2 | |
| Terminal Voltage VCC (with respect to GND) | VCC | -0.3 | 6 | V | with respect to GND | 2 | |
| Input Current, VCC, SRT | 20 | mA | 2 | ||||
| Output Current, RESET or RESET | 20 | mA | 2 | ||||
| Operating Temperature Range | TA | -40 | 125 | °C | 2 | ||
| Storage Temperature Range | TSTG | -65 | 160 | °C | 2 | ||
| Lead Temperature (soldering, 10 sec) | 300 | °C | soldering, 10 sec | 2 |
CAD (Adom-generated)
- Symbol:
MAX821UUS+T - Footprint:
Adom_Gen:Analog_Devices_Maxim_Integrated_MAX821_111452 - 3D model: generated to fit the land (STEP)
- 3D model files:
max821uus-t-etched.step/max821uus-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max821uus-t.step/max821uus-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices / Maxim Integrated datasheet (7 pp, sha256
c57e11276c3b1c6e, retrieved 2026-11-19) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.