Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX3044ESE+T

Maxim Integrated · RS-485/RS-422 ICs · SO-16-150mil

MAX3044ESE+T from Maxim Integrated, in a SO-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 T1IN input Transmitter 1 driver input, with logic high of at least 2.0V and logic low of at most 0.8V, and an absolute maximum of -0.3V to VCC + 0.3V.
2 Y1 tri_state Noninverting Transmitter 1 output, high impedance when disabled, with ±10kV HBM ESD protection and a -7.5V to +10V range when enabled.
3 Z1 tri_state Inverting Transmitter 1 output, high impedance when disabled, with ±10kV HBM ESD protection and a -7.5V to +10V range when enabled.
4 EN input Active-high transmitter enable that enables all four transmitters when driven high; when EN is low and the active-low enable is high, the transmitters are disabled and the part enters low-power shutdown.
5 Z2 tri_state Inverting Transmitter 2 output, high impedance when disabled, with ±10kV HBM ESD protection and a -7.5V to +10V range when enabled.
6 Y2 tri_state Noninverting Transmitter 2 output, high impedance when disabled, with ±10kV HBM ESD protection and a -7.5V to +10V range when enabled.
7 T2IN input Transmitter 2 driver input, with logic high of at least 2.0V and logic low of at most 0.8V, and an absolute maximum of -0.3V to VCC + 0.3V.
8 GND power_in Ground, the reference for all voltages in the datasheet.
9 T3IN input Transmitter 3 driver input, with logic high of at least 2.0V and logic low of at most 0.8V, and an absolute maximum of -0.3V to VCC + 0.3V.
10 Y3 tri_state Noninverting Transmitter 3 output, high impedance when disabled, with ±10kV HBM ESD protection and a -7.5V to +10V range when enabled.
11 Z3 tri_state Inverting Transmitter 3 output, high impedance when disabled, with ±10kV HBM ESD protection and a -7.5V to +10V range when enabled.
12 ~{EN} input Active-low transmitter enable that enables all four transmitters when driven low; when the active-high EN is low and this pin is high, the transmitters are disabled and the part enters low-power shutdown.
13 Z4 tri_state Inverting Transmitter 4 output, high impedance when disabled, with ±10kV HBM ESD protection and a -7.5V to +10V range when enabled.
14 Y4 tri_state Noninverting Transmitter 4 output, high impedance when disabled, with ±10kV HBM ESD protection and a -7.5V to +10V range when enabled.
15 T4IN input Transmitter 4 driver input, with logic high of at least 2.0V and logic low of at most 0.8V, and an absolute maximum of -0.3V to VCC + 0.3V.
16 VCC power_in Positive supply, +5V ±5% with an absolute maximum of +7V, to be bypassed with a 0.1µF capacitor to GND.

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package SO-16-150mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 7 V 2
Driver output voltage (driver disabled) -7.5 12.5 V Driver disabled, Y_, Z_ 2
Driver output voltage (driver enabled) -7.5 10 V Driver enabled, Y_, Z_ 2
Derating above +70°C 8.7 mW/°C 16-Pin Narrow SO, derate above +70°C 2
Maximum junction temperature TJ 150 °C 2
Storage temperature range TSTORE -65 150 °C 2
Lead temperature (soldering, 10 s) 300 °C Soldering, 10 s 2
Operating temperature range TA -40 85 °C MAX304_E_E grade (MAX3044ESE) 2
Supply voltage tolerance VCC -5 5 % VCC = +5V ±5% 2
Driver differential output voltage VOD 2 V Figure 1, R = 50Ω 2
Driver differential output voltage VOD 1.5 V Figure 1, R = 27Ω 2
Change in magnitude of differential output voltage ΔVOD 0.2 V Figure 1, R = 50Ω or 27Ω (Note 2) 2
Driver common-mode output voltage VOC 3 V Figure 1, R = 50Ω or 27Ω; minimum printed as VCC/2 2
Change in magnitude of common-mode voltage ΔVOC 0.2 V Figure 1, R = 50Ω or 27Ω (Note 2) 2
Input high voltage VIH 2 V T_IN, EN_, EN, EN 2
Input low voltage VIL 0.8 V T_IN, EN_, EN, EN 2
Hot-swap driver input current IHOT SWAP -200 200 µA EN_, EN, EN (Note 3) 2
Driver input current IIN -1 1 µA T_IN, EN_, EN, EN 2
Driver short-circuit output current ISC -25 250 mA -7V < VOUT < +10V (Note 4) 2
Output leakage (Y_, Z_) when disabled -1 1 µA EN = GND, EN = VCC (MAX3043/MAX3044/MAX3045B) 2
ESD protection (Y_, Z_) -10 10 kV Human Body Model 2
Electrical fast transient/burst immunity -4 4 kV IEC 1000-4-4 2
Supply current ICC 1 2 mA No load 2
Supply current in shutdown mode ISHDN 0.002 10 µA EN = GND, EN = VCC, TA = +25°C (MAX3043/MAX3044/MAX3045B) 2
Maximum data rate fMAX 2.5 Mbps MAX3041/MAX3044 3
Driver propagation delay tPLH, tPHL 70 150 ns Figures 2 and 3, RDIFF = 54Ω, CDIFF = 50pF 3
Driver differential output rise/fall time tF, tR 33 70 133 ns Figures 2 and 3, RDIFF = 54Ω, CDIFF = 50pF 3
Skew driver to driver (different chips) tDSKEW -52 52 ns Different chips 3
Skew driver to driver (same chip) tSSKEW -15 15 ns Same chip, Figures 2 and 3, RDIFF = 54Ω, CDIFF = 50pF 3
Driver differential output skew /tPLH - tPHL/ -15 15 ns Figures 2 and 3, RDIFF = 54Ω, CDIFF = 50pF 3
Driver enable to output high tZH 400 ns MAX3041, Figures 4 and 5, S2 closed, RL = 500Ω, CL = 100pF 3
Driver enable from shutdown to output high tZH(SHDN) 400 ns Figures 4 and 5, S2 closed, RL = 500Ω, CL = 100pF 4
Driver enable to output low tZL 400 ns MAX3041, Figures 4 and 5, S1 closed, RL = 500Ω, CL = 100pF 4
Driver enable from shutdown to output low tZL(SHDN) 400 ns Figures 4 and 5, S1 closed, RL = 500Ω, CL = 100pF 4
Driver disable time from low tLZ 500 ns Figures 4 and 5, S1 closed, RL = 500Ω, CL = 15pF 4
Driver disable time from high tHZ 500 ns Figures 4 and 5, S2 closed, RL = 500Ω, CL = 15pF 4

CAD (KiCad official)

  • Symbol: MAX3044ESE+T
  • Footprint: Package_SO:SO-16_3.9x9.9mm_P1.27mm
  • 3D model: SO-16-150mil (KiCad packages3D, STEP)
  • 3D model files: max3044ese-t-etched.step / max3044ese-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3044ese-t.step / max3044ese-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (15 pp, sha256 2f88a25548d5ca98, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF