Generated by kicad-footprint-generator · KiCad file format 20260206
MAX3044ESE+T
Maxim Integrated · RS-485/RS-422 ICs · SO-16-150mil
MAX3044ESE+T from Maxim Integrated, in a SO-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | T1IN | input | Transmitter 1 driver input, with logic high of at least 2.0V and logic low of at most 0.8V, and an absolute maximum of -0.3V to VCC + 0.3V. |
| 2 | Y1 | tri_state | Noninverting Transmitter 1 output, high impedance when disabled, with ±10kV HBM ESD protection and a -7.5V to +10V range when enabled. |
| 3 | Z1 | tri_state | Inverting Transmitter 1 output, high impedance when disabled, with ±10kV HBM ESD protection and a -7.5V to +10V range when enabled. |
| 4 | EN | input | Active-high transmitter enable that enables all four transmitters when driven high; when EN is low and the active-low enable is high, the transmitters are disabled and the part enters low-power shutdown. |
| 5 | Z2 | tri_state | Inverting Transmitter 2 output, high impedance when disabled, with ±10kV HBM ESD protection and a -7.5V to +10V range when enabled. |
| 6 | Y2 | tri_state | Noninverting Transmitter 2 output, high impedance when disabled, with ±10kV HBM ESD protection and a -7.5V to +10V range when enabled. |
| 7 | T2IN | input | Transmitter 2 driver input, with logic high of at least 2.0V and logic low of at most 0.8V, and an absolute maximum of -0.3V to VCC + 0.3V. |
| 8 | GND | power_in | Ground, the reference for all voltages in the datasheet. |
| 9 | T3IN | input | Transmitter 3 driver input, with logic high of at least 2.0V and logic low of at most 0.8V, and an absolute maximum of -0.3V to VCC + 0.3V. |
| 10 | Y3 | tri_state | Noninverting Transmitter 3 output, high impedance when disabled, with ±10kV HBM ESD protection and a -7.5V to +10V range when enabled. |
| 11 | Z3 | tri_state | Inverting Transmitter 3 output, high impedance when disabled, with ±10kV HBM ESD protection and a -7.5V to +10V range when enabled. |
| 12 | ~{EN} | input | Active-low transmitter enable that enables all four transmitters when driven low; when the active-high EN is low and this pin is high, the transmitters are disabled and the part enters low-power shutdown. |
| 13 | Z4 | tri_state | Inverting Transmitter 4 output, high impedance when disabled, with ±10kV HBM ESD protection and a -7.5V to +10V range when enabled. |
| 14 | Y4 | tri_state | Noninverting Transmitter 4 output, high impedance when disabled, with ±10kV HBM ESD protection and a -7.5V to +10V range when enabled. |
| 15 | T4IN | input | Transmitter 4 driver input, with logic high of at least 2.0V and logic low of at most 0.8V, and an absolute maximum of -0.3V to VCC + 0.3V. |
| 16 | VCC | power_in | Positive supply, +5V ±5% with an absolute maximum of +7V, to be bypassed with a 0.1µF capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SO-16-150mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 7 | V | 2 | |||
| Driver output voltage (driver disabled) | -7.5 | 12.5 | V | Driver disabled, Y_, Z_ | 2 | ||
| Driver output voltage (driver enabled) | -7.5 | 10 | V | Driver enabled, Y_, Z_ | 2 | ||
| Derating above +70°C | 8.7 | mW/°C | 16-Pin Narrow SO, derate above +70°C | 2 | |||
| Maximum junction temperature | TJ | 150 | °C | 2 | |||
| Storage temperature range | TSTORE | -65 | 150 | °C | 2 | ||
| Lead temperature (soldering, 10 s) | 300 | °C | Soldering, 10 s | 2 | |||
| Operating temperature range | TA | -40 | 85 | °C | MAX304_E_E grade (MAX3044ESE) | 2 | |
| Supply voltage tolerance | VCC | -5 | 5 | % | VCC = +5V ±5% | 2 | |
| Driver differential output voltage | VOD | 2 | V | Figure 1, R = 50Ω | 2 | ||
| Driver differential output voltage | VOD | 1.5 | V | Figure 1, R = 27Ω | 2 | ||
| Change in magnitude of differential output voltage | ΔVOD | 0.2 | V | Figure 1, R = 50Ω or 27Ω (Note 2) | 2 | ||
| Driver common-mode output voltage | VOC | 3 | V | Figure 1, R = 50Ω or 27Ω; minimum printed as VCC/2 | 2 | ||
| Change in magnitude of common-mode voltage | ΔVOC | 0.2 | V | Figure 1, R = 50Ω or 27Ω (Note 2) | 2 | ||
| Input high voltage | VIH | 2 | V | T_IN, EN_, EN, EN | 2 | ||
| Input low voltage | VIL | 0.8 | V | T_IN, EN_, EN, EN | 2 | ||
| Hot-swap driver input current | IHOT SWAP | -200 | 200 | µA | EN_, EN, EN (Note 3) | 2 | |
| Driver input current | IIN | -1 | 1 | µA | T_IN, EN_, EN, EN | 2 | |
| Driver short-circuit output current | ISC | -25 | 250 | mA | -7V < VOUT < +10V (Note 4) | 2 | |
| Output leakage (Y_, Z_) when disabled | -1 | 1 | µA | EN = GND, EN = VCC (MAX3043/MAX3044/MAX3045B) | 2 | ||
| ESD protection (Y_, Z_) | -10 | 10 | kV | Human Body Model | 2 | ||
| Electrical fast transient/burst immunity | -4 | 4 | kV | IEC 1000-4-4 | 2 | ||
| Supply current | ICC | 1 | 2 | mA | No load | 2 | |
| Supply current in shutdown mode | ISHDN | 0.002 | 10 | µA | EN = GND, EN = VCC, TA = +25°C (MAX3043/MAX3044/MAX3045B) | 2 | |
| Maximum data rate | fMAX | 2.5 | Mbps | MAX3041/MAX3044 | 3 | ||
| Driver propagation delay | tPLH, tPHL | 70 | 150 | ns | Figures 2 and 3, RDIFF = 54Ω, CDIFF = 50pF | 3 | |
| Driver differential output rise/fall time | tF, tR | 33 | 70 | 133 | ns | Figures 2 and 3, RDIFF = 54Ω, CDIFF = 50pF | 3 |
| Skew driver to driver (different chips) | tDSKEW | -52 | 52 | ns | Different chips | 3 | |
| Skew driver to driver (same chip) | tSSKEW | -15 | 15 | ns | Same chip, Figures 2 and 3, RDIFF = 54Ω, CDIFF = 50pF | 3 | |
| Driver differential output skew | /tPLH - tPHL/ | -15 | 15 | ns | Figures 2 and 3, RDIFF = 54Ω, CDIFF = 50pF | 3 | |
| Driver enable to output high | tZH | 400 | ns | MAX3041, Figures 4 and 5, S2 closed, RL = 500Ω, CL = 100pF | 3 | ||
| Driver enable from shutdown to output high | tZH(SHDN) | 400 | ns | Figures 4 and 5, S2 closed, RL = 500Ω, CL = 100pF | 4 | ||
| Driver enable to output low | tZL | 400 | ns | MAX3041, Figures 4 and 5, S1 closed, RL = 500Ω, CL = 100pF | 4 | ||
| Driver enable from shutdown to output low | tZL(SHDN) | 400 | ns | Figures 4 and 5, S1 closed, RL = 500Ω, CL = 100pF | 4 | ||
| Driver disable time from low | tLZ | 500 | ns | Figures 4 and 5, S1 closed, RL = 500Ω, CL = 15pF | 4 | ||
| Driver disable time from high | tHZ | 500 | ns | Figures 4 and 5, S2 closed, RL = 500Ω, CL = 15pF | 4 |
CAD (KiCad official)
- Symbol:
MAX3044ESE+T - Footprint:
Package_SO:SO-16_3.9x9.9mm_P1.27mm - 3D model: SO-16-150mil (KiCad packages3D, STEP)
- 3D model files:
max3044ese-t-etched.step/max3044ese-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3044ese-t.step/max3044ese-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (15 pp, sha256
2f88a25548d5ca98, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).