ME2214AM6G from MICRONE, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	LX	power_out	Switch node. Drain of the internal N-channel power MOSFET; connects to the boost inductor and Schottky diode. Absolute maximum voltage -0.3 V to +30 V; RDS(ON) typ 0.7 Ω (max 1.2 Ω); OCP typ 1.2 A.
2	GND	power_in	Ground return for the IC and the internal power MOSFET source. Connect to a solid ground plane without gap breaks per layout guidelines.
3	FB	input	Feedback input. Regulated to VFB = 200 mV typ (190-210 mV) against the internal reference. LED current is set by connecting the top of the sense resistor Rs to FB so that ILED = VFB / Rs. Absolute maximum -0.3 V to +6 V.
4	EN	input	Chip enable / shutdown input. Logic-high (VIH ≥ 1.6 V) enables the converter, logic-low (VIL ≤ 0.9 V) shuts it down (ISHDN typ 3 µA). Also accepts a 100 Hz-200 kHz PWM signal for LED dimming via the internal low-pass filter; average LED current is proportional to duty cycle.
5	VOUT	power_in	Boost output sense pin. Connects to the boosted output rail (after the external Schottky diode and output capacitor) for the internal over-voltage protection comparator; VOVP typ 26 V (23-30 V). Output capacitor should return directly from this pin to ground rather than across the LED string.
6	VIN	power_in	Input supply. Operating range 2.5 V to 5.5 V (absolute max 6 V). UVLO typ 2.2 V (2.0-2.45 V) with 0.1 V hysteresis; supply current 0.8 mA typ. Place a 2.2 µF ceramic input capacitor as close as possible to this pin.

Key specifications

Parameter	Value
Manufacturer	MICRONE
Package	SOT-23-6
Category	LED-drv
Pins	6

Ordering variants

Same part, different packaging or reel option.

ME2214AM6G

CAD (KiCad official)

Symbol: ME2214AM6G
Footprint: Package_TO_SOT_SMD:SOT-23-6
3D model: SOT-23-6 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: MICRONE datasheet (13 pp, sha256 64383de40762380e, retrieved 2026-08-17, tier: lcsc)
Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF