component
ME2214AM6G
Public Made by Adomby adom
MICRONE LED Drivers, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownME2214AM6G
MICRONE · LED Drivers · SOT-23-6
ME2214AM6G from MICRONE, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | power_out | Switch node. Drain of the internal N-channel power MOSFET; connects to the boost inductor and Schottky diode. Absolute maximum voltage -0.3 V to +30 V; RDS(ON) typ 0.7 Ω (max 1.2 Ω); OCP typ 1.2 A. |
| 2 | GND | power_in | Ground return for the IC and the internal power MOSFET source. Connect to a solid ground plane without gap breaks per layout guidelines. |
| 3 | FB | input | Feedback input. Regulated to VFB = 200 mV typ (190-210 mV) against the internal reference. LED current is set by connecting the top of the sense resistor Rs to FB so that ILED = VFB / Rs. Absolute maximum -0.3 V to +6 V. |
| 4 | EN | input | Chip enable / shutdown input. Logic-high (VIH ≥ 1.6 V) enables the converter, logic-low (VIL ≤ 0.9 V) shuts it down (ISHDN typ 3 µA). Also accepts a 100 Hz-200 kHz PWM signal for LED dimming via the internal low-pass filter; average LED current is proportional to duty cycle. |
| 5 | VOUT | power_in | Boost output sense pin. Connects to the boosted output rail (after the external Schottky diode and output capacitor) for the internal over-voltage protection comparator; VOVP typ 26 V (23-30 V). Output capacitor should return directly from this pin to ground rather than across the LED string. |
| 6 | VIN | power_in | Input supply. Operating range 2.5 V to 5.5 V (absolute max 6 V). UVLO typ 2.2 V (2.0-2.45 V) with 0.1 V hysteresis; supply current 0.8 mA typ. Place a 2.2 µF ceramic input capacitor as close as possible to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MICRONE |
| Package | SOT-23-6 |
| Category | LED-drv |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
ME2214AM6G
CAD (KiCad official)
- Symbol:
ME2214AM6G - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
me2214am6g-etched.step/me2214am6g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);me2214am6g.step/me2214am6g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MICRONE datasheet (13 pp, sha256
64383de40762380e, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).