3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMSP430F5509IRGCR
Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · VQFN-64-EP(9x9)
MSP430F5509IRGCR from Texas Instruments, in a VQFN-64-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P6.0/CB0/A0 | bidirectional | General-purpose digital I/O, Comparator_B input CB0, and ADC analog input A0. |
| 2 | P6.1/CB1/A1 | bidirectional | General-purpose digital I/O, Comparator_B input CB1, and ADC analog input A1. |
| 3 | P6.2/CB2/A2 | bidirectional | General-purpose digital I/O, Comparator_B input CB2, and ADC analog input A2. |
| 4 | P6.3/CB3/A3 | bidirectional | General-purpose digital I/O, Comparator_B input CB3, and ADC analog input A3. |
| 5 | P6.4/CB4/A4 | bidirectional | General-purpose digital I/O, Comparator_B input CB4, and ADC analog input A4. |
| 6 | P6.5/CB5/A5 | bidirectional | General-purpose digital I/O, Comparator_B input CB5, and ADC analog input A5. |
| 7 | P6.6/CB6/A6 | bidirectional | General-purpose digital I/O, Comparator_B input CB6, and ADC analog input A6. |
| 8 | P6.7/CB7/A7 | bidirectional | General-purpose digital I/O, Comparator_B input CB7, and ADC analog input A7. |
| 9 | P5.0/A8/VeREF+ | bidirectional | General-purpose digital I/O, ADC analog input A8, and input for an external ADC reference voltage VeREF+. |
| 10 | P5.1/A9/VeREF- | bidirectional | General-purpose digital I/O, ADC analog input A9, and negative terminal for an externally provided ADC reference VeREF-. |
| 11 | AVCC1 | power_in | Analog power supply. |
| 12 | P5.4/XIN | bidirectional | General-purpose digital I/O and input terminal for crystal oscillator XT1. |
| 13 | P5.5/XOUT | bidirectional | General-purpose digital I/O and output terminal of crystal oscillator XT1. |
| 14 | AVSS1 | power_in | Analog ground supply. |
| 15 | DVCC1 | power_in | Digital power supply. |
| 16 | DVSS1 | power_in | Digital ground supply. |
| 17 | VCORE | power_out | Regulated core power supply output for internal use only; no external current loading is possible and it should only be connected to the recommended capacitor CVCORE. |
| 18 | P1.0/TA0CLK/ACLK | bidirectional | General-purpose digital I/O with port interrupt, TA0 clock input TA0CLK, or ACLK output (divided by 1, 2, 4, 8, 16, or 32). |
| 19 | P1.1/TA0.0 | bidirectional | General-purpose digital I/O with port interrupt, TA0 CCR0 capture input CCI0A or compare output Out0, and BSL transmit output. |
| 20 | P1.2/TA0.1 | bidirectional | General-purpose digital I/O with port interrupt, TA0 CCR1 capture input CCI1A or compare output Out1, and BSL receive input. |
| 21 | P1.3/TA0.2 | bidirectional | General-purpose digital I/O with port interrupt, TA0 CCR2 capture input CCI2A or compare output Out2. |
| 22 | P1.4/TA0.3 | bidirectional | General-purpose digital I/O with port interrupt, TA0 CCR3 capture input CCI3A or compare output Out3. |
| 23 | P1.5/TA0.4 | bidirectional | General-purpose digital I/O with port interrupt, TA0 CCR4 capture input CCI4A or compare output Out4. |
| 24 | P1.6/TA1CLK/CBOUT | bidirectional | General-purpose digital I/O with port interrupt, TA1 clock input TA1CLK, or Comparator_B output CBOUT. |
| 25 | P1.7/TA1.0 | bidirectional | General-purpose digital I/O with port interrupt, TA1 CCR0 capture input CCI0A or compare output Out0. |
| 26 | P2.0/TA1.1 | bidirectional | General-purpose digital I/O with port interrupt, TA1 CCR1 capture input CCI1A or compare output Out1. |
| 27 | P2.1/TA1.2 | bidirectional | General-purpose digital I/O with port interrupt, TA1 CCR2 capture input CCI2A or compare output Out2. |
| 28 | P2.2/TA2CLK/SMCLK | bidirectional | General-purpose digital I/O with port interrupt, TA2 clock input TA2CLK, or SMCLK output. |
| 29 | P2.3/TA2.0 | bidirectional | General-purpose digital I/O with port interrupt, TA2 CCR0 capture input CCI0A or compare output Out0. |
| 30 | P2.4/TA2.1 | bidirectional | General-purpose digital I/O with port interrupt, TA2 CCR1 capture input CCI1A or compare output Out1. |
| 31 | P2.5/TA2.2 | bidirectional | General-purpose digital I/O with port interrupt, TA2 CCR2 capture input CCI2A or compare output Out2. |
| 32 | P2.6/RTCCLK/DMAE0 | bidirectional | General-purpose digital I/O with port interrupt, RTC clock output for calibration, or DMA external trigger input DMAE0. |
| 33 | P2.7/UCB0STE/UCA0CLK | bidirectional | General-purpose digital I/O with port interrupt, USCI_B0 SPI slave transmit enable, or USCI_A0 clock signal input (SPI slave) / output (SPI master). |
| 34 | P3.0/UCB0SIMO/UCB0SDA | bidirectional | General-purpose digital I/O, USCI_B0 SPI slave-in/master-out, or USCI_B0 I2C data. |
| 35 | P3.1/UCB0SOMI/UCB0SCL | bidirectional | General-purpose digital I/O, USCI_B0 SPI slave-out/master-in, or USCI_B0 I2C clock. |
| 36 | P3.2/UCB0CLK/UCA0STE | bidirectional | General-purpose digital I/O, USCI_B0 SPI clock input (slave) or output (master), or USCI_A0 SPI slave transmit enable. |
| 37 | P3.3/UCA0TXD/UCA0SIMO | bidirectional | General-purpose digital I/O, USCI_A0 UART transmit data, or USCI_A0 SPI slave-in/master-out. |
| 38 | P3.4/UCA0RXD/UCA0SOMI | bidirectional | General-purpose digital I/O, USCI_A0 UART receive data, or USCI_A0 SPI slave-out/master-in. |
| 39 | DVSS2 | power_in | Digital ground supply. |
| 40 | DVCC2 | power_in | Digital power supply. |
| 41 | P4.0/PM_UCB1STE/PM_UCA1CLK | bidirectional | General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_B1 SPI slave transmit enable or USCI_A1 clock input/output. |
| 42 | P4.1/PM_UCB1SIMO/PM_UCB1SDA | bidirectional | General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_B1 SPI slave-in/master-out or USCI_B1 I2C data. |
| 43 | P4.2/PM_UCB1SOMI/PM_UCB1SCL | bidirectional | General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_B1 SPI slave-out/master-in or USCI_B1 I2C clock. |
| 44 | P4.3/PM_UCB1CLK/PM_UCA1STE | bidirectional | General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_B1 SPI clock input/output or USCI_A1 SPI slave transmit enable. |
| 45 | P4.4/PM_UCA1TXD/PM_UCA1SIMO | bidirectional | General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_A1 UART transmit data or USCI_A1 SPI slave-in/master-out. |
| 46 | P4.5/PM_UCA1RXD/PM_UCA1SOMI | bidirectional | General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_A1 UART receive data or USCI_A1 SPI slave-out/master-in. |
| 47 | P4.6/PM_NONE | bidirectional | General-purpose digital I/O with reconfigurable port mapping; default mapping has no secondary function. |
| 48 | P4.7/PM_NONE | bidirectional | General-purpose digital I/O with reconfigurable port mapping; default mapping has no secondary function. |
| 49 | VSSU | power_in | USB PHY ground supply. |
| 50 | PU.0/DP | bidirectional | General-purpose digital I/O controlled by the USB control register, or USB data terminal DP. |
| 51 | PUR | bidirectional | USB pullup resistor pin (open drain); its voltage level invokes the default USB BSL, and a 1-MΩ resistor to ground is recommended. |
| 52 | PU.1/DM | bidirectional | General-purpose digital I/O controlled by the USB control register, or USB data terminal DM. |
| 53 | VBUS | power_in | USB LDO input; connect to USB power source. |
| 54 | VUSB | power_out | USB LDO output. |
| 55 | V18 | power_out | USB regulated power; internal use only, no external current loading. |
| 56 | AVSS2 | power_in | Analog ground supply. |
| 57 | P5.2/XT2IN | bidirectional | General-purpose digital I/O and input terminal for crystal oscillator XT2. |
| 58 | P5.3/XT2OUT | bidirectional | General-purpose digital I/O and output terminal of crystal oscillator XT2. |
| 59 | TEST/SBWTCK | input | Test mode pin that selects digital I/O on the JTAG pins; also the Spy-Bi-Wire input clock. |
| 60 | PJ.0/TDO | bidirectional | General-purpose digital I/O and JTAG test data output port. |
| 61 | PJ.1/TDI/TCLK | bidirectional | General-purpose digital I/O, JTAG test data input, and JTAG test clock input. |
| 62 | PJ.2/TMS | bidirectional | General-purpose digital I/O and JTAG test mode select. |
| 63 | PJ.3/TCK | bidirectional | General-purpose digital I/O and JTAG test clock. |
| 64 | RST/NMI/SBWTDIO | bidirectional | Active-low reset input (internal pullup enabled by default when configured as reset), nonmaskable interrupt input, and Spy-Bi-Wire data input/output. |
| 65 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-64-EP(9x9) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 65 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Voltage applied at VCC to VSS | VCC | -0.3 | 4.1 | V | 19 | ||
| Voltage applied to any pin (excluding VCORE, VBUS, V18) | -0.3 | V | Printed max is VCC + 0.3 V | 19 | |||
| Diode current at any device pin | -2 | 2 | mA | 19 | |||
| Maximum junction temperature | TJ | 95 | °C | 19 | |||
| Storage temperature | Tstg | -55 | 150 | °C | 19 | ||
| Supply voltage during program execution and flash programming (AVCC = DVCC) | VCC | 1.8 | 3.6 | V | PMMCOREVx = 0 | 19 | |
| Supply voltage during program execution and flash programming (AVCC = DVCC) | VCC | 2 | 3.6 | V | PMMCOREVx = 0, 1 | 19 | |
| Supply voltage during program execution and flash programming (AVCC = DVCC) | VCC | 2.2 | 3.6 | V | PMMCOREVx = 0, 1, 2 | 19 | |
| Supply voltage during program execution and flash programming (AVCC = DVCC) | VCC | 2.4 | 3.6 | V | PMMCOREVx = 0, 1, 2, 3 | 19 | |
| Supply voltage during USB operation, USB PLL disabled | VCC,USB | 1.8 | 3.6 | V | USB_EN = 1, UPLLEN = 0, PMMCOREVx = 0 | 19 | |
| Supply voltage during USB operation, USB PLL disabled | VCC,USB | 2 | 3.6 | V | USB_EN = 1, UPLLEN = 0, PMMCOREVx = 0, 1 | 19 | |
| Supply voltage during USB operation, USB PLL disabled | VCC,USB | 2.2 | 3.6 | V | USB_EN = 1, UPLLEN = 0, PMMCOREVx = 0, 1, 2 | 19 | |
| Supply voltage during USB operation, USB PLL disabled | VCC,USB | 2.4 | 3.6 | V | USB_EN = 1, UPLLEN = 0, PMMCOREVx = 0, 1, 2, 3 | 19 | |
| Supply voltage during USB operation, USB PLL enabled | VCC,USB | 2.2 | 3.6 | V | USB_EN = 1, UPLLEN = 1, PMMCOREVx = 2 | 19 | |
| Supply voltage during USB operation, USB PLL enabled | VCC,USB | 2.4 | 3.6 | V | USB_EN = 1, UPLLEN = 1, PMMCOREVx = 2, 3 | 19 | |
| Operating free-air temperature | TA | -40 | 85 | °C | I version | 19 | |
| Operating junction temperature | TJ | -40 | 85 | °C | I version | 19 | |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | 8 | MHz | PMMCOREVx = 0, 1.8 V ≤ VCC ≤ 3.6 V | 20 | |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | 12 | MHz | PMMCOREVx = 1, 2.0 V ≤ VCC ≤ 3.6 V | 20 | |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | 20 | MHz | PMMCOREVx = 2, 2.2 V ≤ VCC ≤ 3.6 V | 20 | |
| Processor frequency (maximum MCLK frequency) | fSYSTEM | 0 | 25 | MHz | PMMCOREVx = 3, 2.4 V ≤ VCC ≤ 3.6 V | 20 | |
| Minimum processor frequency for USB operation | fSYSTEM_USB | 1.5 | MHz | 20 | |||
| Active mode supply current into VCC, flash execution | IAM, Flash | 0.25 | 0.27 | mA | Flash, VCC 3 V, PMMCOREVx 0, fDCO = fMCLK = fSMCLK = 1 MHz | 21 | |
| Active mode supply current into VCC, flash execution | IAM, Flash | 1.55 | 1.68 | mA | Flash, VCC 3 V, PMMCOREVx 0, fDCO = fMCLK = fSMCLK = 8 MHz | 21 | |
| Active mode supply current into VCC, RAM execution | IAM, RAM | 0.17 | 0.19 | mA | RAM, VCC 3 V, PMMCOREVx 0, fDCO = fMCLK = fSMCLK = 1 MHz | 21 | |
| Active mode supply current into VCC, RAM execution | IAM, RAM | 0.91 | 1 | mA | RAM, VCC 3 V, PMMCOREVx 0, fDCO = fMCLK = fSMCLK = 8 MHz | 21 | |
| Positive-going input threshold voltage | VIT+ | 0.8 | 1.4 | V | VCC 1.8 V | 24 | |
| Positive-going input threshold voltage | VIT+ | 1.5 | 2.1 | V | VCC 3 V | 24 | |
| Negative-going input threshold voltage | VIT- | 0.45 | 1 | V | VCC 1.8 V | 24 | |
| Negative-going input threshold voltage | VIT- | 0.75 | 1.65 | V | VCC 3 V | 24 | |
| Input voltage hysteresis (VIT+, VIT-) | Vhys | 0.3 | 0.85 | V | VCC 1.8 V | 24 | |
| Input voltage hysteresis (VIT+, VIT-) | Vhys | 0.4 | 1 | V | VCC 3 V | 24 | |
| Pullup or pulldown resistor | RPull | 20 | 35 | 50 | kΩ | For pullup: VIN = VSS; for pulldown: VIN = VCC | 24 |
| Leakage current, high-impedance (I/O pins) | Ilkg(Px.y) | -50 | 50 | nA | 1.8 V, 3 V | 24 | |
| Port output frequency (with load) | fPx.y | 16 | MHz | VCC = 1.8 V, PMMCOREVx = 0 | 25 | ||
| Port output frequency (with load) | fPx.y | 25 | MHz | VCC = 3 V, PMMCOREVx = 3 | 25 | ||
| Clock output frequency ACLK, SMCLK, MCLK | fPort_CLK | 16 | MHz | CL = 20 pF, VCC = 1.8 V, PMMCOREVx = 0 | 25 | ||
| Clock output frequency ACLK, SMCLK, MCLK | fPort_CLK | 25 | MHz | CL = 20 pF, VCC = 3 V, PMMCOREVx = 3 | 25 | ||
| XT1 oscillator logic-level square-wave input frequency, LF mode | fXT1,LF,SW | 10 | 32.768 | 50 | kHz | XTS = 0, XT1BYPASS = 1 | 28 |
| Duty cycle, LF mode | 30 | 70 | % | XTS = 0, measured at ACLK, fXT1,LF = 32768 Hz | 28 | ||
| Oscillator fault frequency, LF mode | fFault,LF | 10 | 10000 | Hz | XTS = 0 | 28 | |
| XT2 oscillator crystal frequency, mode 0 | fXT2,HF0 | 4 | 8 | MHz | XT2DRIVEx = 0, XT2BYPASS = 0 | 29 | |
| XT2 oscillator crystal frequency, mode 1 | fXT2,HF1 | 8 | 16 | MHz | XT2DRIVEx = 1, XT2BYPASS = 0 | 29 | |
| XT2 oscillator crystal frequency, mode 2 | fXT2,HF2 | 16 | 24 | MHz | XT2DRIVEx = 2, XT2BYPASS = 0 | 29 | |
| XT2 oscillator crystal frequency, mode 3 | fXT2,HF3 | 24 | 32 | MHz | XT2DRIVEx = 3, XT2BYPASS = 0 | 29 | |
| XT2 oscillator logic-level square-wave input frequency, bypass mode | fXT2,HF,SW | 0.7 | 32 | MHz | XT2BYPASS = 1 | 29 | |
| Duty cycle, HF mode | 40 | 50 | 60 | % | Measured at ACLK, fXT2,HF2 = 20 MHz | 29 | |
| Oscillator fault frequency, HF mode | fFault,HF | 30 | 300 | kHz | XT2BYPASS = 1 | 29 | |
| VLO frequency | fVLO | 6 | 9.4 | 14 | kHz | Measured at ACLK, 1.8 V to 3.6 V | 30 |
| VLO duty cycle | 40 | 50 | 60 | % | Measured at ACLK, 1.8 V to 3.6 V | 30 | |
| REFO absolute tolerance calibrated | -3.5 | 3.5 | % | Full temperature range, 1.8 V to 3.6 V | 30 | ||
| REFO absolute tolerance calibrated | -1.5 | 1.5 | % | TA = 25°C, 3 V | 30 | ||
| Output voltage high level, USB D+/D- single ended | VOH | 2.8 | 3.6 | V | USB 2.0 load conditions | 47 | |
| Output voltage low level, USB D+/D- single ended | VOL | 0 | 0.3 | V | USB 2.0 load conditions | 47 | |
| Vbus USB bus voltage | VBUS | 3.76 | 5.5 | V | Normal operation | 47 | |
| Maximum external current from VUSB terminal | IUSB_EXT | 12 | mA | USB LDO is on | 47 | ||
| Junction-to-ambient thermal resistance, still air (VQFN RGC) | θJA | 30 | °C/W | VQFN (RGC) package | 23 | ||
| Junction-to-case (top) thermal resistance (VQFN RGC) | θJC(TOP) | 15.6 | °C/W | VQFN (RGC) package | 23 | ||
| Junction-to-case (bottom) thermal resistance (VQFN RGC) | θJC(BOTTOM) | 1.6 | °C/W | VQFN (RGC) package | 23 | ||
| Junction-to-board thermal resistance (VQFN RGC) | θJB | 8.9 | °C/W | VQFN (RGC) package | 23 |
CAD (KiCad official)
- Symbol:
MSP430F5509IRGCR - Footprint:
Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm - 3D model: VQFN-64-EP(9x9) (KiCad packages3D, STEP)
- 3D model files:
msp430f5509irgcr-etched.step/msp430f5509irgcr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430f5509irgcr.step/msp430f5509irgcr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (134 pp, sha256
00704c373f824b5a, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).