Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MSP430F5509IRGCR

Texas Instruments · Microcontroller Units (MCUs/MPUs/SOCs) · VQFN-64-EP(9x9)

MSP430F5509IRGCR from Texas Instruments, in a VQFN-64-EP(9x9). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P6.0/CB0/A0 bidirectional General-purpose digital I/O, Comparator_B input CB0, and ADC analog input A0.
2 P6.1/CB1/A1 bidirectional General-purpose digital I/O, Comparator_B input CB1, and ADC analog input A1.
3 P6.2/CB2/A2 bidirectional General-purpose digital I/O, Comparator_B input CB2, and ADC analog input A2.
4 P6.3/CB3/A3 bidirectional General-purpose digital I/O, Comparator_B input CB3, and ADC analog input A3.
5 P6.4/CB4/A4 bidirectional General-purpose digital I/O, Comparator_B input CB4, and ADC analog input A4.
6 P6.5/CB5/A5 bidirectional General-purpose digital I/O, Comparator_B input CB5, and ADC analog input A5.
7 P6.6/CB6/A6 bidirectional General-purpose digital I/O, Comparator_B input CB6, and ADC analog input A6.
8 P6.7/CB7/A7 bidirectional General-purpose digital I/O, Comparator_B input CB7, and ADC analog input A7.
9 P5.0/A8/VeREF+ bidirectional General-purpose digital I/O, ADC analog input A8, and input for an external ADC reference voltage VeREF+.
10 P5.1/A9/VeREF- bidirectional General-purpose digital I/O, ADC analog input A9, and negative terminal for an externally provided ADC reference VeREF-.
11 AVCC1 power_in Analog power supply.
12 P5.4/XIN bidirectional General-purpose digital I/O and input terminal for crystal oscillator XT1.
13 P5.5/XOUT bidirectional General-purpose digital I/O and output terminal of crystal oscillator XT1.
14 AVSS1 power_in Analog ground supply.
15 DVCC1 power_in Digital power supply.
16 DVSS1 power_in Digital ground supply.
17 VCORE power_out Regulated core power supply output for internal use only; no external current loading is possible and it should only be connected to the recommended capacitor CVCORE.
18 P1.0/TA0CLK/ACLK bidirectional General-purpose digital I/O with port interrupt, TA0 clock input TA0CLK, or ACLK output (divided by 1, 2, 4, 8, 16, or 32).
19 P1.1/TA0.0 bidirectional General-purpose digital I/O with port interrupt, TA0 CCR0 capture input CCI0A or compare output Out0, and BSL transmit output.
20 P1.2/TA0.1 bidirectional General-purpose digital I/O with port interrupt, TA0 CCR1 capture input CCI1A or compare output Out1, and BSL receive input.
21 P1.3/TA0.2 bidirectional General-purpose digital I/O with port interrupt, TA0 CCR2 capture input CCI2A or compare output Out2.
22 P1.4/TA0.3 bidirectional General-purpose digital I/O with port interrupt, TA0 CCR3 capture input CCI3A or compare output Out3.
23 P1.5/TA0.4 bidirectional General-purpose digital I/O with port interrupt, TA0 CCR4 capture input CCI4A or compare output Out4.
24 P1.6/TA1CLK/CBOUT bidirectional General-purpose digital I/O with port interrupt, TA1 clock input TA1CLK, or Comparator_B output CBOUT.
25 P1.7/TA1.0 bidirectional General-purpose digital I/O with port interrupt, TA1 CCR0 capture input CCI0A or compare output Out0.
26 P2.0/TA1.1 bidirectional General-purpose digital I/O with port interrupt, TA1 CCR1 capture input CCI1A or compare output Out1.
27 P2.1/TA1.2 bidirectional General-purpose digital I/O with port interrupt, TA1 CCR2 capture input CCI2A or compare output Out2.
28 P2.2/TA2CLK/SMCLK bidirectional General-purpose digital I/O with port interrupt, TA2 clock input TA2CLK, or SMCLK output.
29 P2.3/TA2.0 bidirectional General-purpose digital I/O with port interrupt, TA2 CCR0 capture input CCI0A or compare output Out0.
30 P2.4/TA2.1 bidirectional General-purpose digital I/O with port interrupt, TA2 CCR1 capture input CCI1A or compare output Out1.
31 P2.5/TA2.2 bidirectional General-purpose digital I/O with port interrupt, TA2 CCR2 capture input CCI2A or compare output Out2.
32 P2.6/RTCCLK/DMAE0 bidirectional General-purpose digital I/O with port interrupt, RTC clock output for calibration, or DMA external trigger input DMAE0.
33 P2.7/UCB0STE/UCA0CLK bidirectional General-purpose digital I/O with port interrupt, USCI_B0 SPI slave transmit enable, or USCI_A0 clock signal input (SPI slave) / output (SPI master).
34 P3.0/UCB0SIMO/UCB0SDA bidirectional General-purpose digital I/O, USCI_B0 SPI slave-in/master-out, or USCI_B0 I2C data.
35 P3.1/UCB0SOMI/UCB0SCL bidirectional General-purpose digital I/O, USCI_B0 SPI slave-out/master-in, or USCI_B0 I2C clock.
36 P3.2/UCB0CLK/UCA0STE bidirectional General-purpose digital I/O, USCI_B0 SPI clock input (slave) or output (master), or USCI_A0 SPI slave transmit enable.
37 P3.3/UCA0TXD/UCA0SIMO bidirectional General-purpose digital I/O, USCI_A0 UART transmit data, or USCI_A0 SPI slave-in/master-out.
38 P3.4/UCA0RXD/UCA0SOMI bidirectional General-purpose digital I/O, USCI_A0 UART receive data, or USCI_A0 SPI slave-out/master-in.
39 DVSS2 power_in Digital ground supply.
40 DVCC2 power_in Digital power supply.
41 P4.0/PM_UCB1STE/PM_UCA1CLK bidirectional General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_B1 SPI slave transmit enable or USCI_A1 clock input/output.
42 P4.1/PM_UCB1SIMO/PM_UCB1SDA bidirectional General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_B1 SPI slave-in/master-out or USCI_B1 I2C data.
43 P4.2/PM_UCB1SOMI/PM_UCB1SCL bidirectional General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_B1 SPI slave-out/master-in or USCI_B1 I2C clock.
44 P4.3/PM_UCB1CLK/PM_UCA1STE bidirectional General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_B1 SPI clock input/output or USCI_A1 SPI slave transmit enable.
45 P4.4/PM_UCA1TXD/PM_UCA1SIMO bidirectional General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_A1 UART transmit data or USCI_A1 SPI slave-in/master-out.
46 P4.5/PM_UCA1RXD/PM_UCA1SOMI bidirectional General-purpose digital I/O with reconfigurable port mapping; default mapping is USCI_A1 UART receive data or USCI_A1 SPI slave-out/master-in.
47 P4.6/PM_NONE bidirectional General-purpose digital I/O with reconfigurable port mapping; default mapping has no secondary function.
48 P4.7/PM_NONE bidirectional General-purpose digital I/O with reconfigurable port mapping; default mapping has no secondary function.
49 VSSU power_in USB PHY ground supply.
50 PU.0/DP bidirectional General-purpose digital I/O controlled by the USB control register, or USB data terminal DP.
51 PUR bidirectional USB pullup resistor pin (open drain); its voltage level invokes the default USB BSL, and a 1-MΩ resistor to ground is recommended.
52 PU.1/DM bidirectional General-purpose digital I/O controlled by the USB control register, or USB data terminal DM.
53 VBUS power_in USB LDO input; connect to USB power source.
54 VUSB power_out USB LDO output.
55 V18 power_out USB regulated power; internal use only, no external current loading.
56 AVSS2 power_in Analog ground supply.
57 P5.2/XT2IN bidirectional General-purpose digital I/O and input terminal for crystal oscillator XT2.
58 P5.3/XT2OUT bidirectional General-purpose digital I/O and output terminal of crystal oscillator XT2.
59 TEST/SBWTCK input Test mode pin that selects digital I/O on the JTAG pins; also the Spy-Bi-Wire input clock.
60 PJ.0/TDO bidirectional General-purpose digital I/O and JTAG test data output port.
61 PJ.1/TDI/TCLK bidirectional General-purpose digital I/O, JTAG test data input, and JTAG test clock input.
62 PJ.2/TMS bidirectional General-purpose digital I/O and JTAG test mode select.
63 PJ.3/TCK bidirectional General-purpose digital I/O and JTAG test clock.
64 RST/NMI/SBWTDIO bidirectional Active-low reset input (internal pullup enabled by default when configured as reset), nonmaskable interrupt input, and Spy-Bi-Wire data input/output.
65 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-64-EP(9x9)
Category Single Chip Microcomputer/Microcontroller
Pins 65

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Voltage applied at VCC to VSS VCC -0.3 4.1 V 19
Voltage applied to any pin (excluding VCORE, VBUS, V18) -0.3 V Printed max is VCC + 0.3 V 19
Diode current at any device pin -2 2 mA 19
Maximum junction temperature TJ 95 °C 19
Storage temperature Tstg -55 150 °C 19
Supply voltage during program execution and flash programming (AVCC = DVCC) VCC 1.8 3.6 V PMMCOREVx = 0 19
Supply voltage during program execution and flash programming (AVCC = DVCC) VCC 2 3.6 V PMMCOREVx = 0, 1 19
Supply voltage during program execution and flash programming (AVCC = DVCC) VCC 2.2 3.6 V PMMCOREVx = 0, 1, 2 19
Supply voltage during program execution and flash programming (AVCC = DVCC) VCC 2.4 3.6 V PMMCOREVx = 0, 1, 2, 3 19
Supply voltage during USB operation, USB PLL disabled VCC,USB 1.8 3.6 V USB_EN = 1, UPLLEN = 0, PMMCOREVx = 0 19
Supply voltage during USB operation, USB PLL disabled VCC,USB 2 3.6 V USB_EN = 1, UPLLEN = 0, PMMCOREVx = 0, 1 19
Supply voltage during USB operation, USB PLL disabled VCC,USB 2.2 3.6 V USB_EN = 1, UPLLEN = 0, PMMCOREVx = 0, 1, 2 19
Supply voltage during USB operation, USB PLL disabled VCC,USB 2.4 3.6 V USB_EN = 1, UPLLEN = 0, PMMCOREVx = 0, 1, 2, 3 19
Supply voltage during USB operation, USB PLL enabled VCC,USB 2.2 3.6 V USB_EN = 1, UPLLEN = 1, PMMCOREVx = 2 19
Supply voltage during USB operation, USB PLL enabled VCC,USB 2.4 3.6 V USB_EN = 1, UPLLEN = 1, PMMCOREVx = 2, 3 19
Operating free-air temperature TA -40 85 °C I version 19
Operating junction temperature TJ -40 85 °C I version 19
Processor frequency (maximum MCLK frequency) fSYSTEM 0 8 MHz PMMCOREVx = 0, 1.8 V ≤ VCC ≤ 3.6 V 20
Processor frequency (maximum MCLK frequency) fSYSTEM 0 12 MHz PMMCOREVx = 1, 2.0 V ≤ VCC ≤ 3.6 V 20
Processor frequency (maximum MCLK frequency) fSYSTEM 0 20 MHz PMMCOREVx = 2, 2.2 V ≤ VCC ≤ 3.6 V 20
Processor frequency (maximum MCLK frequency) fSYSTEM 0 25 MHz PMMCOREVx = 3, 2.4 V ≤ VCC ≤ 3.6 V 20
Minimum processor frequency for USB operation fSYSTEM_USB 1.5 MHz 20
Active mode supply current into VCC, flash execution IAM, Flash 0.25 0.27 mA Flash, VCC 3 V, PMMCOREVx 0, fDCO = fMCLK = fSMCLK = 1 MHz 21
Active mode supply current into VCC, flash execution IAM, Flash 1.55 1.68 mA Flash, VCC 3 V, PMMCOREVx 0, fDCO = fMCLK = fSMCLK = 8 MHz 21
Active mode supply current into VCC, RAM execution IAM, RAM 0.17 0.19 mA RAM, VCC 3 V, PMMCOREVx 0, fDCO = fMCLK = fSMCLK = 1 MHz 21
Active mode supply current into VCC, RAM execution IAM, RAM 0.91 1 mA RAM, VCC 3 V, PMMCOREVx 0, fDCO = fMCLK = fSMCLK = 8 MHz 21
Positive-going input threshold voltage VIT+ 0.8 1.4 V VCC 1.8 V 24
Positive-going input threshold voltage VIT+ 1.5 2.1 V VCC 3 V 24
Negative-going input threshold voltage VIT- 0.45 1 V VCC 1.8 V 24
Negative-going input threshold voltage VIT- 0.75 1.65 V VCC 3 V 24
Input voltage hysteresis (VIT+, VIT-) Vhys 0.3 0.85 V VCC 1.8 V 24
Input voltage hysteresis (VIT+, VIT-) Vhys 0.4 1 V VCC 3 V 24
Pullup or pulldown resistor RPull 20 35 50 kΩ For pullup: VIN = VSS; for pulldown: VIN = VCC 24
Leakage current, high-impedance (I/O pins) Ilkg(Px.y) -50 50 nA 1.8 V, 3 V 24
Port output frequency (with load) fPx.y 16 MHz VCC = 1.8 V, PMMCOREVx = 0 25
Port output frequency (with load) fPx.y 25 MHz VCC = 3 V, PMMCOREVx = 3 25
Clock output frequency ACLK, SMCLK, MCLK fPort_CLK 16 MHz CL = 20 pF, VCC = 1.8 V, PMMCOREVx = 0 25
Clock output frequency ACLK, SMCLK, MCLK fPort_CLK 25 MHz CL = 20 pF, VCC = 3 V, PMMCOREVx = 3 25
XT1 oscillator logic-level square-wave input frequency, LF mode fXT1,LF,SW 10 32.768 50 kHz XTS = 0, XT1BYPASS = 1 28
Duty cycle, LF mode 30 70 % XTS = 0, measured at ACLK, fXT1,LF = 32768 Hz 28
Oscillator fault frequency, LF mode fFault,LF 10 10000 Hz XTS = 0 28
XT2 oscillator crystal frequency, mode 0 fXT2,HF0 4 8 MHz XT2DRIVEx = 0, XT2BYPASS = 0 29
XT2 oscillator crystal frequency, mode 1 fXT2,HF1 8 16 MHz XT2DRIVEx = 1, XT2BYPASS = 0 29
XT2 oscillator crystal frequency, mode 2 fXT2,HF2 16 24 MHz XT2DRIVEx = 2, XT2BYPASS = 0 29
XT2 oscillator crystal frequency, mode 3 fXT2,HF3 24 32 MHz XT2DRIVEx = 3, XT2BYPASS = 0 29
XT2 oscillator logic-level square-wave input frequency, bypass mode fXT2,HF,SW 0.7 32 MHz XT2BYPASS = 1 29
Duty cycle, HF mode 40 50 60 % Measured at ACLK, fXT2,HF2 = 20 MHz 29
Oscillator fault frequency, HF mode fFault,HF 30 300 kHz XT2BYPASS = 1 29
VLO frequency fVLO 6 9.4 14 kHz Measured at ACLK, 1.8 V to 3.6 V 30
VLO duty cycle 40 50 60 % Measured at ACLK, 1.8 V to 3.6 V 30
REFO absolute tolerance calibrated -3.5 3.5 % Full temperature range, 1.8 V to 3.6 V 30
REFO absolute tolerance calibrated -1.5 1.5 % TA = 25°C, 3 V 30
Output voltage high level, USB D+/D- single ended VOH 2.8 3.6 V USB 2.0 load conditions 47
Output voltage low level, USB D+/D- single ended VOL 0 0.3 V USB 2.0 load conditions 47
Vbus USB bus voltage VBUS 3.76 5.5 V Normal operation 47
Maximum external current from VUSB terminal IUSB_EXT 12 mA USB LDO is on 47
Junction-to-ambient thermal resistance, still air (VQFN RGC) θJA 30 °C/W VQFN (RGC) package 23
Junction-to-case (top) thermal resistance (VQFN RGC) θJC(TOP) 15.6 °C/W VQFN (RGC) package 23
Junction-to-case (bottom) thermal resistance (VQFN RGC) θJC(BOTTOM) 1.6 °C/W VQFN (RGC) package 23
Junction-to-board thermal resistance (VQFN RGC) θJB 8.9 °C/W VQFN (RGC) package 23

CAD (KiCad official)

  • Symbol: MSP430F5509IRGCR
  • Footprint: Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm
  • 3D model: VQFN-64-EP(9x9) (KiCad packages3D, STEP)
  • 3D model files: msp430f5509irgcr-etched.step / msp430f5509irgcr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430f5509irgcr.step / msp430f5509irgcr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (134 pp, sha256 00704c373f824b5a, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF