component
TLV2464CN
Public Made by Adomby adom
Texas Instruments Operational Amplifier, PDIP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTLV2464CN
Texas Instruments · Operational Amplifier · PDIP-14
TLV2464CN from Texas Instruments, in a PDIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of operational amplifier channel 1, rated for ±175 mA absolute maximum output current. |
| 2 | 1IN− | input | Inverting input of operational amplifier channel 1; input current is limited to ±200 mA (any input) absolute maximum. |
| 3 | 1IN+ | input | Non-inverting input of operational amplifier channel 1; the input common-mode range extends beyond the supply rails. |
| 4 | VDD+ | power_in | Positive supply, 2.7 V to 6 V per the selection guide, with an absolute maximum supply voltage of 6 V referenced to GND. |
| 5 | 2IN+ | input | Non-inverting input of operational amplifier channel 2; the input common-mode range extends beyond the supply rails. |
| 6 | 2IN− | input | Inverting input of operational amplifier channel 2; input current is limited to ±200 mA (any input) absolute maximum. |
| 7 | 2OUT | output | Output of operational amplifier channel 2, rated for ±175 mA absolute maximum output current. |
| 8 | 3OUT | output | Output of operational amplifier channel 3, rated for ±175 mA absolute maximum output current. |
| 9 | 3IN− | input | Inverting input of operational amplifier channel 3; input current is limited to ±200 mA (any input) absolute maximum. |
| 10 | 3IN+ | input | Non-inverting input of operational amplifier channel 3; the input common-mode range extends beyond the supply rails. |
| 11 | GND | power_in | Ground (0 V) reference; all voltages in the absolute maximum ratings are referenced to GND. |
| 12 | 4IN+ | input | Non-inverting input of operational amplifier channel 4; the input common-mode range extends beyond the supply rails. |
| 13 | 4IN− | input | Inverting input of operational amplifier channel 4; input current is limited to ±200 mA (any input) absolute maximum. |
| 14 | 4OUT | output | Output of operational amplifier channel 4, rated for ±175 mA absolute maximum output current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-14 |
| Category | Amplifiers |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, VDD (single supply) | VDD | 2.7 | 6 | V | Single supply | 7 | |
| Supply voltage, VDD (split supply) | VDD | 1.35 | 3 | V | Split supply; printed as ±1.35 V to ±3 V | 7 | |
| Common-mode input voltage range, VICR | VICR | 0 | V | Upper limit printed as VDD | 7 | ||
| Operating free-air temperature, TA (C suffix) | TA | 0 | 70 | °C | C-suffix | 7 | |
| Supply voltage, VDD | VDD | 6 | V | All voltages except differential are referenced to GND (Note 1) | 6 | ||
| Differential input voltage, VID | VID | -0.2 | V | Upper limit printed as VDD + 0.2 V | 6 | ||
| Input current, II (any input) | II | -200 | 200 | mA | Any input | 6 | |
| Output current, IO | IO | -175 | 175 | mA | 6 | ||
| Total input current, II (into VDD+) | II | 175 | mA | Into VDD+ | 6 | ||
| Total output current, IO (out of GND) | IO | 175 | mA | Out of GND | 6 | ||
| Operating free-air temperature range, TA (C suffix) | TA | 0 | 70 | °C | C suffix | 6 | |
| Maximum junction temperature, TJ | TJ | 150 | °C | 6 | |||
| Storage temperature range, Tstg | Tstg | -65 | 150 | °C | 6 | ||
| Input offset voltage, VIO (25°C) | VIO | 500 | 2000 | µV | VDD = 3 V, VIC = 1.5 V; TA = 25°C | 7 | |
| Input offset voltage, VIO (full range) | VIO | 2200 | µV | VDD = 3 V, VIC = 1.5 V; full range TA | 7 | ||
| Input offset current, IIO (25°C) | IIO | 2.8 | 7 | nA | VDD = 3 V, VIC = 1.5 V; TA = 25°C | 7 | |
| Input offset current, IIO (full range) | IIO | 20 | nA | VDD = 3 V, VIC = 1.5 V; full range TA (C suffix) | 7 | ||
| Input bias current, IIB (25°C) | IIB | 4.4 | 14 | nA | VDD = 3 V, VIC = 1.5 V, VO = 1.5 V; TA = 25°C | 7 | |
| Input bias current, IIB (full range) | IIB | 25 | nA | VDD = 3 V, VIC = 1.5 V, VO = 1.5 V; full range TA (C suffix) | 7 | ||
| High-level output voltage, VOH (25°C) | VOH | 2.9 | V | VDD = 3 V, IOH = -2.5 mA; TA = 25°C | 7 | ||
| High-level output voltage, VOH (full range) | VOH | 2.8 | V | VDD = 3 V, IOH = -2.5 mA; full range TA | 7 | ||
| High-level output voltage, VOH (25°C) | VOH | 2.7 | V | VDD = 3 V, IOH = -10 mA; TA = 25°C | 7 | ||
| High-level output voltage, VOH (full range) | VOH | 2.5 | V | VDD = 3 V, IOH = -10 mA; full range TA | 7 | ||
| Low-level output voltage, VOL (25°C) | VOL | 0.1 | V | VDD = 3 V, VIC = 1.5 V, IOL = 2.5 mA; TA = 25°C | 7 | ||
| Low-level output voltage, VOL (full range) | VOL | 0.2 | V | VDD = 3 V, VIC = 1.5 V, IOL = 2.5 mA; full range TA | 7 | ||
| Low-level output voltage, VOL (25°C) | VOL | 0.3 | V | VDD = 3 V, VIC = 1.5 V, IOL = 10 mA; TA = 25°C | 7 | ||
| Low-level output voltage, VOL (full range) | VOL | 0.5 | V | VDD = 3 V, VIC = 1.5 V, IOL = 10 mA; full range TA | 7 | ||
| Output current, IO | IO | -40 | 40 | mA | Measured 1 V from rail; 25°C | 7 | |
| Large-signal differential voltage amplification, AVD (25°C) | AVD | 90 | 105 | dB | RL = 10 kΩ, VO(PP) = 1 V; 25°C | 7 | |
| Common-mode rejection ratio, CMRR (25°C) | CMRR | 66 | 80 | dB | VICR = 0 to 3 V, RS = 50 Ω; 25°C | 8 | |
| Supply voltage rejection ratio, kSVR (25°C) | kSVR | 80 | 85 | dB | VDD = 2.7 V to 6 V, VIC = VDD/2, no load; 25°C | 8 | |
| Supply current per channel, IDD (25°C) | IDD | 0.5 | 0.575 | mA | VO = 1.5 V, no load; 25°C | 8 | |
| Supply current per channel, IDD (full range) | IDD | 0.9 | mA | VO = 1.5 V, no load; full range TA | 8 | ||
| Slew rate at unity gain, SR (25°C) | SR | 0.9 | 1.6 | V/µs | VO(PP) = 0.8 V, CL = 160 pF, RL = 10 kΩ; 25°C | 8 | |
| Slew rate at unity gain, SR (full range) | SR | 0.8 | V/µs | VO(PP) = 0.8 V, CL = 160 pF, RL = 10 kΩ; full range TA | 8 | ||
| Input offset voltage, VIO (25°C) | VIO | 500 | 2000 | µV | VDD = 5 V; TA = 25°C | 9 | |
| Input offset voltage, VIO (full range) | VIO | 2200 | µV | VDD = 5 V; full range TA | 9 | ||
| Input offset current, IIO (25°C) | IIO | 0.3 | 7 | nA | VDD = 5 V, VIC = 2.5 V; TA = 25°C | 9 | |
| Input offset current, IIO (full range) | IIO | 15 | nA | VDD = 5 V, VIC = 2.5 V; full range TA (C suffix) | 9 | ||
| Input bias current, IIB (25°C) | IIB | 1.3 | 14 | nA | VDD = 5 V, VIC = 2.5 V, VO = 2.5 V; TA = 25°C | 9 | |
| Input bias current, IIB (full range) | IIB | 30 | nA | VDD = 5 V, VIC = 2.5 V, VO = 2.5 V; full range TA (C suffix) | 9 | ||
| High-level output voltage, VOH (25°C) | VOH | 4.9 | V | VDD = 5 V, IOH = -2.5 mA; TA = 25°C | 9 | ||
| High-level output voltage, VOH (full range) | VOH | 4.8 | V | VDD = 5 V, IOH = -2.5 mA; full range TA | 9 | ||
| High-level output voltage, VOH (25°C) | VOH | 4.8 | V | VDD = 5 V, IOH = -10 mA; TA = 25°C | 9 | ||
| High-level output voltage, VOH (full range) | VOH | 4.7 | V | VDD = 5 V, IOH = -10 mA; full range TA | 9 | ||
| Low-level output voltage, VOL (25°C) | VOL | 0.1 | V | VIC = 2.5 V, IOL = 2.5 mA; TA = 25°C | 9 | ||
| Low-level output voltage, VOL (full range) | VOL | 0.2 | V | VIC = 2.5 V, IOL = 2.5 mA; full range TA | 9 | ||
| Low-level output voltage, VOL (25°C) | VOL | 0.2 | V | VIC = 2.5 V, IOL = 10 mA; TA = 25°C | 9 | ||
| Low-level output voltage, VOL (full range) | VOL | 0.3 | V | VIC = 2.5 V, IOL = 10 mA; full range TA | 9 | ||
| Output current, IO | IO | -80 | 80 | mA | Measured at 1 V from rail; 25°C | 9 | |
| Large-signal differential voltage amplification, AVD (25°C) | AVD | 92 | 109 | dB | VIC = 2.5 V, RL = 10 kΩ; 25°C | 9 | |
| Large-signal differential voltage amplification, AVD (full range) | AVD | 90 | dB | VIC = 2.5 V, VO = 1 V to 4 V, RL = 10 kΩ; full range TA | 9 | ||
| Common-mode rejection ratio, CMRR (25°C) | CMRR | 71 | 85 | dB | VICR = 0 V to 5 V, RS = 50 Ω; 25°C | 9 | |
| Supply voltage rejection ratio, kSVR (25°C) | kSVR | 80 | 85 | dB | VDD = 2.7 V to 6 V, VIC = VDD/2, no load; 25°C | 9 | |
| Supply current per channel, IDD (25°C) | IDD | 0.55 | 0.65 | mA | VO = 2.5 V, no load; 25°C | 9 | |
| Supply current per channel, IDD (full range) | IDD | 1 | mA | VO = 2.5 V, no load; full range TA | 9 | ||
| Slew rate at unity gain, SR (25°C) | SR | 0.9 | 1.6 | V/µs | VO(PP) = 2 V, CL = 160 pF, RL = 10 kΩ; 25°C | 10 | |
| Slew rate at unity gain, SR (full range) | SR | 0.8 | V/µs | VO(PP) = 2 V, CL = 160 pF, RL = 10 kΩ; full range TA | 10 | ||
| Junction-to-ambient thermal resistance, θJA | θJA | 78 | °C/W | N (14, 16) package, C and I suffix; not production tested | 6 |
CAD (KiCad official)
- Symbol:
TLV2464CN - Footprint:
Package_DIP:DIP-14_W7.62mm - 3D model: PDIP-14 (KiCad packages3D, STEP)
- 3D model files:
tlv2464cn-etched.step/tlv2464cn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tlv2464cn.step/tlv2464cn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (76 pp, sha256
8c30ab955a433bf3, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).