3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHX65HVD3082EIDRG
HANSCHIP semiconductor · RS-485 / RS-422 ICs · SOP-8
HX65HVD3082EIDRG from HANSCHIP semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: with RE low, RO is high when (A − B) ≥ −50 mV and low when (A − B) ≤ −200 mV. |
| 2 | RE | input | Receiver output enable: RO is active when RE is low and high-impedance when RE is high; RE high with DE low puts the device in low-power shutdown, and RE has a hot-plug input structure. |
| 3 | DE | input | Driver output enable: the driver outputs are active when DE is high and high-impedance when DE is low; RE high with DE low puts the device in low-power shutdown, and DE has a hot-plug input structure. |
| 4 | DI | input | Driver input: with DE high, a low on DI drives A/Y low and B/Z high, and a high on DI drives A/Y high and B/Z low. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | A | bidirectional | Receiver non-inverting input and driver non-inverting output (A/Y); receiver input/bus voltage range is −7 V to +12 V and the pin has ±16 kV IEC 61000-4-2 ESD protection. |
| 7 | B | bidirectional | Receiver inverting input and driver inverting output (B/Z); receiver input/bus voltage range is −7 V to +12 V and the pin has ±16 kV IEC 61000-4-2 ESD protection. |
| 8 | VCC | power_in | Positive supply: 4.5 V ≤ VCC ≤ 5.5 V, with a 0.1 µF capacitor to ground recommended. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HANSCHIP semiconductor |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 6 | V | 3 | |||
| Control input voltage (RE, DE) | RE, DE | -0.3 | 6 | V | 3 | ||
| Driver input voltage | DI | -0.3 | 6 | V | 3 | ||
| Driver output voltage | A,B,Y,Z | -7 | 12 | V | 3 | ||
| Receiver input voltage | A,B | -7 | 12 | V | 3 | ||
| Receiver output voltage | RO | -0.3 | V | upper limit printed as VCC+0.3 | 3 | ||
| Continuous power dissipation, 8-pin SOP | 500 | mW | TA=+70℃ | 3 | |||
| Storage temperature | -65 | 150 | ℃ | 3 | |||
| Lead temperature, soldering | TLEAD | 245 | ℃ | 焊接 10s | 3 | ||
| Operating temperature, EI grade | -40 | 85 | ℃ | HX65HVD308_EI | 3 | ||
| Supply voltage | VCC | 4.5 | 5.5 | V | 15 | ||
| Differential driver output, RS-422 load | VOD | 2.7 | V | 图1,RL=100Ω(RS-422) | 4 | ||
| Differential driver output, RS-485 load | VOD | 2.1 | V | 图1,RL=54Ω(RS-485) | 4 | ||
| Change in magnitude of differential output voltage | ΔVOD | 0.2 | V | 图1,RL=100Ω 或 RL=54Ω | 4 | ||
| Driver common-mode output voltage | VOC | 3 | V | 图1,RL=100Ω 或 RL=54Ω | 4 | ||
| Change in magnitude of common-mode output voltage | ΔVOC | 0.2 | V | 图1,RL=100Ω 或 RL=54Ω | 4 | ||
| Input high voltage (DE, DI, RE) | VIH | 2 | V | 4 | |||
| Input low voltage (DE, DI) | VIL | 0.8 | V | 4 | |||
| Input current (DE, DI, RE) | IIN | -1 | 1 | μA | 4 | ||
| Input current (A,B), full duplex | IA, IB | 125 | μA | DE=GND, VCC=GND 或 VCC, VIN=12V | 4 | ||
| Input current (A,B), full duplex | IA, IB | -75 | μA | DE=GND, VCC=GND 或 VCC, VIN=-7V | 4 | ||
| Output leakage current (Y,Z), full duplex | IO | 125 | μA | DE=GND, VCC=GND 或 VCC, VIN=12V | 4 | ||
| Output leakage current (Y,Z), full duplex | IO | -100 | μA | DE=GND, VCC=GND 或 VCC, VIN=-7V | 4 | ||
| Driver short-circuit output current | IOSD | 250 | mA | 0≦VOUT≦12V | 4 | ||
| Driver short-circuit output current | IOSD | -250 | mA | -7≦VOUT≦Vcc | 4 | ||
| Driver short-circuit foldback output current | IOSDF | 20 | mA | Vcc-1V≦VOUT≦Vcc+0.5V | 4 | ||
| Driver short-circuit foldback output current | IOSDF | -20 | mA | -0.5V≦VOUT≦+1V | 4 | ||
| Receiver differential threshold voltage | VTH | -200 | -125 | -50 | mV | -7V≦VCM≦12V | 4 |
| Receiver output low voltage | VOL | 0.4 | V | IO= 4mA,VID=-200mV | 4 | ||
| Receiver tri-state output current | IOZR | -1 | 1 | μA | 0≦VO≦VCC | 4 | |
| Receiver input resistance | RIN | 96 | kΩ | -7V≦VCM≦12V | 4 | ||
| Receiver output short-circuit current | IOSR | -7 | 7 | mA | 0V≦VRO≦VCC | 4 | |
| Receiver output short-circuit current | IOSR | -95 | 95 | mA | 0V≦VRO≦VCC | 4 | |
| Supply current, no load | Icc | 530 | 900 | μA | 无负载, RE=VCC, DI=GND 或 VCC, DE=VCC | 5 | |
| Supply current, no load | Icc | 475 | 600 | μA | 无负载, RE=VCC, DE=GND | 5 | |
| Supply current, no load | Icc | 530 | 1000 | μA | 无负载, RE=GND, DI=GND 或 VCC, DE=VCC | 5 | |
| Supply current, no load | Icc | 475 | 800 | μA | 无负载, RE=GND, DE=GND | 5 | |
| Standby supply current | ISHDN | 0.05 | 10 | μA | DE=GND, RE=VCC | 5 | |
| ESD, RS-485 pins, IEC 61000-4-2 air-gap discharge | -16 | 16 | kV | RS-485 pins (A,B,Y,Z,A/Y,B/Z) | 5 | ||
| ESD, RS-485 pins, IEC 61000-4-2 contact discharge, half duplex | -16 | 16 | kV | IEC 61000-4-2 接触放电, 半双工 | 5 | ||
| ESD, RS-485 pins to GND, HBM | -16 | 16 | kV | 管脚到地 | 5 | ||
| ESD, all pins, HBM | -4 | 4 | kV | JEDEC JS-001-2010 | 5 | ||
| ESD, charged device model (CDM) | -500 | 500 | V | JESD22-C101E | 5 | ||
| Driver enable to output low | tDZL | 3500 | ns | 图3和6,CL=100pF, S2闭合 | 5 | ||
| Driver low to disable time | tDLZ | 100 | ns | 图3和6,CL=15pF S2闭合 | 5 | ||
| Driver high to disable time | tDHZ | 100 | ns | 图3和6,CL=15pF S3闭合 | 5 | ||
| Driver enable from standby to output high | tDZH(SHDN) | 5500 | ns | 图3和6,CL=15pF S3闭合 | 5 | ||
| Driver enable from standby to output low | tDZL(SHDN) | 5500 | ns | 图3和6,CL=15pF S2闭合 | 5 | ||
| Standby time | tSHDN | 50 | 350 | 700 | ns | 注释4 | 5 |
| Receiver propagation delay | tRPLH, tRPHL | 200 | ns | 图7和8,CL=15pF /VID/≥2.0V, VID≤15ns | 6 | ||
| Receiver differential output skew | tRSKEW | -30 | 30 | ns | 图7和8,CL=15pF /VID/≥2.0V, VID≤15ns | 6 | |
| Receiver enable to output low | tRZL | 50 | ns | 图4和9,S1=-1.5V,S2接VCC | 6 | ||
| Receiver enable to output high | tRZH | 50 | ns | 图4和9,S1=+1.5V,S2接GND | 6 | ||
| Receiver low to disable time | tRLZ | 50 | ns | 图4和9,S1=-1.5V,S2接VCC | 6 | ||
| Receiver high to disable time | tRHZ | 50 | ns | 图4和9,S1=+1.5V,S2接GND | 6 | ||
| Receiver enable from standby to output high | tRZH(SHDN) | 5500 | ns | 图4和9,S1=-1.5V,S2接VCC | 6 | ||
| Receiver enable from standby to output low | tRZL(SHDN) | 5500 | ns | 图4和9,S1=+1.5V,S2接GND | 6 | ||
| Receiver standby time | tSHDN | 50 | 700 | ns | 注释4 | 6 | |
| Input hysteresis (DE, DI, RE) | VHYS | 100 | mV | 4 |
CAD (KiCad official)
- Symbol:
HX65HVD3082EIDRG - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx65hvd3082eidrg-etched.step/hx65hvd3082eidrg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx65hvd3082eidrg.step/hx65hvd3082eidrg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HANSCHIP semiconductor datasheet (24 pp, sha256
1f5431dc10e7574a, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).