Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HX65HVD3082EIDRG

HANSCHIP semiconductor · RS-485 / RS-422 ICs · SOP-8

HX65HVD3082EIDRG from HANSCHIP semiconductor, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: with RE low, RO is high when (A − B) ≥ −50 mV and low when (A − B) ≤ −200 mV.
2 RE input Receiver output enable: RO is active when RE is low and high-impedance when RE is high; RE high with DE low puts the device in low-power shutdown, and RE has a hot-plug input structure.
3 DE input Driver output enable: the driver outputs are active when DE is high and high-impedance when DE is low; RE high with DE low puts the device in low-power shutdown, and DE has a hot-plug input structure.
4 DI input Driver input: with DE high, a low on DI drives A/Y low and B/Z high, and a high on DI drives A/Y high and B/Z low.
5 GND power_in Ground reference for the device.
6 A bidirectional Receiver non-inverting input and driver non-inverting output (A/Y); receiver input/bus voltage range is −7 V to +12 V and the pin has ±16 kV IEC 61000-4-2 ESD protection.
7 B bidirectional Receiver inverting input and driver inverting output (B/Z); receiver input/bus voltage range is −7 V to +12 V and the pin has ±16 kV IEC 61000-4-2 ESD protection.
8 VCC power_in Positive supply: 4.5 V ≤ VCC ≤ 5.5 V, with a 0.1 µF capacitor to ground recommended.

Key specifications

Parameter Value
Manufacturer HANSCHIP semiconductor
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 6 V 3
Control input voltage (RE, DE) RE, DE -0.3 6 V 3
Driver input voltage DI -0.3 6 V 3
Driver output voltage A,B,Y,Z -7 12 V 3
Receiver input voltage A,B -7 12 V 3
Receiver output voltage RO -0.3 V upper limit printed as VCC+0.3 3
Continuous power dissipation, 8-pin SOP 500 mW TA=+70℃ 3
Storage temperature -65 150 ℃ 3
Lead temperature, soldering TLEAD 245 ℃ 焊接 10s 3
Operating temperature, EI grade -40 85 ℃ HX65HVD308_EI 3
Supply voltage VCC 4.5 5.5 V 15
Differential driver output, RS-422 load VOD 2.7 V 图1,RL=100Ω(RS-422) 4
Differential driver output, RS-485 load VOD 2.1 V 图1,RL=54Ω(RS-485) 4
Change in magnitude of differential output voltage ΔVOD 0.2 V 图1,RL=100Ω 或 RL=54Ω 4
Driver common-mode output voltage VOC 3 V 图1,RL=100Ω 或 RL=54Ω 4
Change in magnitude of common-mode output voltage ΔVOC 0.2 V 图1,RL=100Ω 或 RL=54Ω 4
Input high voltage (DE, DI, RE) VIH 2 V 4
Input low voltage (DE, DI) VIL 0.8 V 4
Input current (DE, DI, RE) IIN -1 1 μA 4
Input current (A,B), full duplex IA, IB 125 μA DE=GND, VCC=GND 或 VCC, VIN=12V 4
Input current (A,B), full duplex IA, IB -75 μA DE=GND, VCC=GND 或 VCC, VIN=-7V 4
Output leakage current (Y,Z), full duplex IO 125 μA DE=GND, VCC=GND 或 VCC, VIN=12V 4
Output leakage current (Y,Z), full duplex IO -100 μA DE=GND, VCC=GND 或 VCC, VIN=-7V 4
Driver short-circuit output current IOSD 250 mA 0≦VOUT≦12V 4
Driver short-circuit output current IOSD -250 mA -7≦VOUT≦Vcc 4
Driver short-circuit foldback output current IOSDF 20 mA Vcc-1V≦VOUT≦Vcc+0.5V 4
Driver short-circuit foldback output current IOSDF -20 mA -0.5V≦VOUT≦+1V 4
Receiver differential threshold voltage VTH -200 -125 -50 mV -7V≦VCM≦12V 4
Receiver output low voltage VOL 0.4 V IO= 4mA,VID=-200mV 4
Receiver tri-state output current IOZR -1 1 μA 0≦VO≦VCC 4
Receiver input resistance RIN 96 kΩ -7V≦VCM≦12V 4
Receiver output short-circuit current IOSR -7 7 mA 0V≦VRO≦VCC 4
Receiver output short-circuit current IOSR -95 95 mA 0V≦VRO≦VCC 4
Supply current, no load Icc 530 900 μA 无负载, RE=VCC, DI=GND 或 VCC, DE=VCC 5
Supply current, no load Icc 475 600 μA 无负载, RE=VCC, DE=GND 5
Supply current, no load Icc 530 1000 μA 无负载, RE=GND, DI=GND 或 VCC, DE=VCC 5
Supply current, no load Icc 475 800 μA 无负载, RE=GND, DE=GND 5
Standby supply current ISHDN 0.05 10 μA DE=GND, RE=VCC 5
ESD, RS-485 pins, IEC 61000-4-2 air-gap discharge -16 16 kV RS-485 pins (A,B,Y,Z,A/Y,B/Z) 5
ESD, RS-485 pins, IEC 61000-4-2 contact discharge, half duplex -16 16 kV IEC 61000-4-2 接触放电, 半双工 5
ESD, RS-485 pins to GND, HBM -16 16 kV 管脚到地 5
ESD, all pins, HBM -4 4 kV JEDEC JS-001-2010 5
ESD, charged device model (CDM) -500 500 V JESD22-C101E 5
Driver enable to output low tDZL 3500 ns 图3和6,CL=100pF, S2闭合 5
Driver low to disable time tDLZ 100 ns 图3和6,CL=15pF S2闭合 5
Driver high to disable time tDHZ 100 ns 图3和6,CL=15pF S3闭合 5
Driver enable from standby to output high tDZH(SHDN) 5500 ns 图3和6,CL=15pF S3闭合 5
Driver enable from standby to output low tDZL(SHDN) 5500 ns 图3和6,CL=15pF S2闭合 5
Standby time tSHDN 50 350 700 ns 注释4 5
Receiver propagation delay tRPLH, tRPHL 200 ns 图7和8,CL=15pF /VID/≥2.0V, VID≤15ns 6
Receiver differential output skew tRSKEW -30 30 ns 图7和8,CL=15pF /VID/≥2.0V, VID≤15ns 6
Receiver enable to output low tRZL 50 ns 图4和9,S1=-1.5V,S2接VCC 6
Receiver enable to output high tRZH 50 ns 图4和9,S1=+1.5V,S2接GND 6
Receiver low to disable time tRLZ 50 ns 图4和9,S1=-1.5V,S2接VCC 6
Receiver high to disable time tRHZ 50 ns 图4和9,S1=+1.5V,S2接GND 6
Receiver enable from standby to output high tRZH(SHDN) 5500 ns 图4和9,S1=-1.5V,S2接VCC 6
Receiver enable from standby to output low tRZL(SHDN) 5500 ns 图4和9,S1=+1.5V,S2接GND 6
Receiver standby time tSHDN 50 700 ns 注释4 6
Input hysteresis (DE, DI, RE) VHYS 100 mV 4

CAD (KiCad official)

  • Symbol: HX65HVD3082EIDRG
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hx65hvd3082eidrg-etched.step / hx65hvd3082eidrg-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx65hvd3082eidrg.step / hx65hvd3082eidrg.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HANSCHIP semiconductor datasheet (24 pp, sha256 1f5431dc10e7574a, retrieved 2026-10-18, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF