Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS2116DRLR

Texas Instruments · Power Distribution Switches · SOT-583

TPS2116DRLR from Texas Instruments, in a SOT-583. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 GND power_in Device ground pin.
2 VOUT power_out Output power pin, with recommended operating voltage of 0 V to 5.5 V and absolute maximum of -0.3 V to 6 V.
3 VIN1 power_in Channel 1 input power pin, with recommended input voltage of 1.6 V to 5.5 V.
4 PR1 input Selects VIN1 when high and VIN2 when low; the PR1 reference voltage is 0.92 V minimum, 1 V typical and 1.08 V maximum.
5 MODE input Tie to VIN1 for priority mode or pull up to an external voltage for manual mode; logic high threshold is 1 V minimum and logic low threshold is 0.35 V maximum.
6 VIN2 power_in Channel 2 input power pin, with recommended input voltage of 1.6 V to 5.5 V.
7 VOUT power_out Output power pin, with recommended operating voltage of 0 V to 5.5 V and absolute maximum of -0.3 V to 6 V.
8 ST output Open-drain status output that is pulled low when VIN1 is not being used, with VOL of 0.1 V maximum at 1 mA.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-583
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN1, VIN2 1.6 5.5 V 4
Output voltage VOUT 0 5.5 V 4
Control pin voltage VST, VMODE, VPR1 0 5.5 V 4
Ambient temperature TA -40 105 °C 4
Input voltage VIN1, VIN2 -0.3 6 V 4
Output voltage VOUT -0.3 6 V 4
Control pin voltage VST, VPR1, VMODE -0.3 6 V 4
Maximum current IMAX 2.5 A 4
Maximum pulsed current IMAX,PLS 4 A Max duration 1ms, Duty cycle of 2% 4
Storage temperature Tstg -65 150 °C 4
Junction-to-ambient thermal resistance RθJA 111.5 °C/W 4
VIN1 standby current ISTBY,VIN1 1.1 uA VIN2 powers VOUT; VIN1 > VIN2 + 0.1V; 25°C 5
VIN1 standby current ISTBY,VIN1 2 uA VIN2 powers VOUT; VIN1 > VIN2 + 0.1V; -40°C to 105°C 5
VIN1 standby current ISTBY,VIN1 0.22 uA VIN2 powers VOUT; VIN2 > VIN1 + 0.2V; 25°C 5
VIN1 standby current ISTBY,VIN1 0.32 uA VIN2 powers VOUT; VIN2 > VIN1 + 0.2V; -40°C to 105°C 5
VIN2 standby current ISTBY,VIN2 1.2 uA VIN1 powers VOUT; VIN2 > VIN1 + 0.2V; 25°C 5
VIN2 standby current ISTBY,VIN2 2.1 uA VIN1 powers VOUT; VIN2 > VIN1 + 0.2V; -40°C to 105°C 5
VIN2 standby current ISTBY,VIN2 0.05 uA VIN1 powers VOUT; VIN1 > VIN2 + 0.1V; 25°C 5
VIN2 standby current ISTBY,VIN2 0.09 uA VIN1 powers VOUT; VIN1 > VIN2 + 0.1V; -40°C to 105°C 5
VIN1 quiescent current IQ, VIN1 1.32 uA VIN1 powers VOUT; VIN1 > VIN2 + 0.1V; 25°C 5
VIN1 quiescent current IQ, VIN1 4.4 uA VIN1 powers VOUT; VIN1 > VIN2 + 0.1V; -40°C to 105°C 5
VIN1 quiescent current IQ, VIN1 0.3 uA VIN1 powers VOUT; VIN2 > VIN1 + 0.2V; 25°C 5
VIN1 quiescent current IQ, VIN1 0.55 uA VIN1 powers VOUT; VIN2 > VIN1 + 0.2V; -40°C to 105°C 5
VIN2 quiescent current IQ, VIN2 1.35 uA VIN2 powers VOUT; VIN2 > VIN1 + 0.2V; 25°C 5
VIN2 quiescent current IQ, VIN2 4.5 uA VIN2 powers VOUT; VIN2 > VIN1 + 0.2V; -40°C to 105°C 5
VIN2 quiescent current IQ, VIN2 0.1 uA VIN2 powers VOUT; VIN1 > VIN2 + 0.1V; 25°C 5
VIN2 quiescent current IQ, VIN2 0.29 uA VIN2 powers VOUT; VIN1 > VIN2 + 0.1V; -40°C to 105°C 5
VIN1 shutdown current ISD,VIN1 2.9 uA MODE = 0V, PR1 = 5V; VIN1 > VIN2; VOUT = 0V; -40°C to 105°C 5
VIN1 shutdown current ISD,VIN1 2.4 uA MODE = 0V, PR1 = 5V; VIN1 < VIN2; VOUT = 0V; -40°C to 105°C 5
Reverse leakage current out of VINx IREV 0.001 uA VOUT = 5.5V; VINx = 0V, VINy = Open; 25°C 5
Reverse leakage current out of VINx IREV 0.15 uA VOUT = 5.5V; VINx = 0V, VINy = Open; 105°C 5
Reverse leakage current into VOUT IREV 0.01 uA VOUT = 5.5V; VINx = 0V, VINy = Open; 25°C 5
Reverse leakage current into VOUT IREV 0.25 uA VOUT = 5.5V; VINx = 0V, VINy = Open; 105°C 5
PR1 pin leakage IPR1 0.1 uA -40°C to 105°C 5
MODE pin leakage IMODE 0.1 uA -40°C to 105°C 5
ST pin leakage IST 0.03 uA -40°C to 105°C 5
On-resistance RON 37 46 mΩ VINx = 5V; IOUT = 200mA; 25°C 5
On-resistance RON 55 mΩ VINx = 5V; IOUT = 200mA; -40°C to 85°C 5
On-resistance RON 60 mΩ VINx = 5V; IOUT = 200mA; -40°C to 105°C 5
On-resistance RON 40 48 mΩ VINx = 3.3V; IOUT = 200mA; 25°C 5
On-resistance RON 59 mΩ VINx = 3.3V; IOUT = 200mA; -40°C to 105°C 5
On-resistance RON 41 51 mΩ VINx = 1.8V; IOUT = 200mA; 25°C 5
On-resistance RON 61 mΩ VINx = 1.8V; IOUT = 200mA; -40°C to 85°C 5
On-resistance RON 66 mΩ VINx = 1.8V; IOUT = 200mA; -40°C to 105°C 5
On-resistance RON 42 52 mΩ VINx = 1.6V; IOUT = 200mA; 25°C 5
On-resistance RON 68 mΩ VINx = 1.6V; IOUT = 200mA; -40°C to 85°C 5
On-resistance RON 74 mΩ VINx = 1.6V; IOUT = 200mA; -40°C to 105°C 5
Status pin VOL VOL,ST 0.1 V IST = 1mA; -40°C to 105°C 6
Status pin response time tST 5 us ST pin pulled high to low; RST = 10kΩ; -40°C to 105°C 6
PR1 reference voltage VREF 0.92 1 1.08 V -40°C to 105°C 6
MODE logic high threshold VIH,MODE 1 5.5 V -40°C to 105°C 6
MODE logic low threshold VIL,MODE 0 0.35 V -40°C to 105°C 6
Reverse current blocking response time tRCB 2 us VOUT > Selected VIN + 1V; -40°C to 105°C 6
Reverse current blocking rising threshold (VOUT - VIN) VRCB,R 42 70 mV -40°C to 105°C 6
Reverse current blocking falling threshold (VOUT - VIN) VRCB,F 17 40 mV -40°C to 105°C 6
Reverse current blocking activation current IRCB 1.4 4 A -40°C to 105°C 6
Thermal shutdown TSD 170 °C 6
Thermal shutdown hysteresis TSDHYS 20 °C 7

CAD (Adom-generated)

  • Symbol: TPS2116DRLR
  • Footprint: Adom_Gen:Texas_Instruments_TPS2116_1e2d2a
  • 3D model: generated to fit the land (STEP)
  • 3D model files: tps2116drlr-etched.step / tps2116drlr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps2116drlr.step / tps2116drlr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (25 pp, sha256 5babd88afb84e2e6, retrieved 2026-11-06, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF