component
TPS2116DRLR
Public Made by Adomby adom
Texas Instruments Power Distribution Switches, SOT-583. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS2116DRLR
Texas Instruments · Power Distribution Switches · SOT-583
TPS2116DRLR from Texas Instruments, in a SOT-583. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Device ground pin. |
| 2 | VOUT | power_out | Output power pin, with recommended operating voltage of 0 V to 5.5 V and absolute maximum of -0.3 V to 6 V. |
| 3 | VIN1 | power_in | Channel 1 input power pin, with recommended input voltage of 1.6 V to 5.5 V. |
| 4 | PR1 | input | Selects VIN1 when high and VIN2 when low; the PR1 reference voltage is 0.92 V minimum, 1 V typical and 1.08 V maximum. |
| 5 | MODE | input | Tie to VIN1 for priority mode or pull up to an external voltage for manual mode; logic high threshold is 1 V minimum and logic low threshold is 0.35 V maximum. |
| 6 | VIN2 | power_in | Channel 2 input power pin, with recommended input voltage of 1.6 V to 5.5 V. |
| 7 | VOUT | power_out | Output power pin, with recommended operating voltage of 0 V to 5.5 V and absolute maximum of -0.3 V to 6 V. |
| 8 | ST | output | Open-drain status output that is pulled low when VIN1 is not being used, with VOL of 0.1 V maximum at 1 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-583 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN1, VIN2 | 1.6 | 5.5 | V | 4 | ||
| Output voltage | VOUT | 0 | 5.5 | V | 4 | ||
| Control pin voltage | VST, VMODE, VPR1 | 0 | 5.5 | V | 4 | ||
| Ambient temperature | TA | -40 | 105 | °C | 4 | ||
| Input voltage | VIN1, VIN2 | -0.3 | 6 | V | 4 | ||
| Output voltage | VOUT | -0.3 | 6 | V | 4 | ||
| Control pin voltage | VST, VPR1, VMODE | -0.3 | 6 | V | 4 | ||
| Maximum current | IMAX | 2.5 | A | 4 | |||
| Maximum pulsed current | IMAX,PLS | 4 | A | Max duration 1ms, Duty cycle of 2% | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 111.5 | °C/W | 4 | |||
| VIN1 standby current | ISTBY,VIN1 | 1.1 | uA | VIN2 powers VOUT; VIN1 > VIN2 + 0.1V; 25°C | 5 | ||
| VIN1 standby current | ISTBY,VIN1 | 2 | uA | VIN2 powers VOUT; VIN1 > VIN2 + 0.1V; -40°C to 105°C | 5 | ||
| VIN1 standby current | ISTBY,VIN1 | 0.22 | uA | VIN2 powers VOUT; VIN2 > VIN1 + 0.2V; 25°C | 5 | ||
| VIN1 standby current | ISTBY,VIN1 | 0.32 | uA | VIN2 powers VOUT; VIN2 > VIN1 + 0.2V; -40°C to 105°C | 5 | ||
| VIN2 standby current | ISTBY,VIN2 | 1.2 | uA | VIN1 powers VOUT; VIN2 > VIN1 + 0.2V; 25°C | 5 | ||
| VIN2 standby current | ISTBY,VIN2 | 2.1 | uA | VIN1 powers VOUT; VIN2 > VIN1 + 0.2V; -40°C to 105°C | 5 | ||
| VIN2 standby current | ISTBY,VIN2 | 0.05 | uA | VIN1 powers VOUT; VIN1 > VIN2 + 0.1V; 25°C | 5 | ||
| VIN2 standby current | ISTBY,VIN2 | 0.09 | uA | VIN1 powers VOUT; VIN1 > VIN2 + 0.1V; -40°C to 105°C | 5 | ||
| VIN1 quiescent current | IQ, VIN1 | 1.32 | uA | VIN1 powers VOUT; VIN1 > VIN2 + 0.1V; 25°C | 5 | ||
| VIN1 quiescent current | IQ, VIN1 | 4.4 | uA | VIN1 powers VOUT; VIN1 > VIN2 + 0.1V; -40°C to 105°C | 5 | ||
| VIN1 quiescent current | IQ, VIN1 | 0.3 | uA | VIN1 powers VOUT; VIN2 > VIN1 + 0.2V; 25°C | 5 | ||
| VIN1 quiescent current | IQ, VIN1 | 0.55 | uA | VIN1 powers VOUT; VIN2 > VIN1 + 0.2V; -40°C to 105°C | 5 | ||
| VIN2 quiescent current | IQ, VIN2 | 1.35 | uA | VIN2 powers VOUT; VIN2 > VIN1 + 0.2V; 25°C | 5 | ||
| VIN2 quiescent current | IQ, VIN2 | 4.5 | uA | VIN2 powers VOUT; VIN2 > VIN1 + 0.2V; -40°C to 105°C | 5 | ||
| VIN2 quiescent current | IQ, VIN2 | 0.1 | uA | VIN2 powers VOUT; VIN1 > VIN2 + 0.1V; 25°C | 5 | ||
| VIN2 quiescent current | IQ, VIN2 | 0.29 | uA | VIN2 powers VOUT; VIN1 > VIN2 + 0.1V; -40°C to 105°C | 5 | ||
| VIN1 shutdown current | ISD,VIN1 | 2.9 | uA | MODE = 0V, PR1 = 5V; VIN1 > VIN2; VOUT = 0V; -40°C to 105°C | 5 | ||
| VIN1 shutdown current | ISD,VIN1 | 2.4 | uA | MODE = 0V, PR1 = 5V; VIN1 < VIN2; VOUT = 0V; -40°C to 105°C | 5 | ||
| Reverse leakage current out of VINx | IREV | 0.001 | uA | VOUT = 5.5V; VINx = 0V, VINy = Open; 25°C | 5 | ||
| Reverse leakage current out of VINx | IREV | 0.15 | uA | VOUT = 5.5V; VINx = 0V, VINy = Open; 105°C | 5 | ||
| Reverse leakage current into VOUT | IREV | 0.01 | uA | VOUT = 5.5V; VINx = 0V, VINy = Open; 25°C | 5 | ||
| Reverse leakage current into VOUT | IREV | 0.25 | uA | VOUT = 5.5V; VINx = 0V, VINy = Open; 105°C | 5 | ||
| PR1 pin leakage | IPR1 | 0.1 | uA | -40°C to 105°C | 5 | ||
| MODE pin leakage | IMODE | 0.1 | uA | -40°C to 105°C | 5 | ||
| ST pin leakage | IST | 0.03 | uA | -40°C to 105°C | 5 | ||
| On-resistance | RON | 37 | 46 | mΩ | VINx = 5V; IOUT = 200mA; 25°C | 5 | |
| On-resistance | RON | 55 | mΩ | VINx = 5V; IOUT = 200mA; -40°C to 85°C | 5 | ||
| On-resistance | RON | 60 | mΩ | VINx = 5V; IOUT = 200mA; -40°C to 105°C | 5 | ||
| On-resistance | RON | 40 | 48 | mΩ | VINx = 3.3V; IOUT = 200mA; 25°C | 5 | |
| On-resistance | RON | 59 | mΩ | VINx = 3.3V; IOUT = 200mA; -40°C to 105°C | 5 | ||
| On-resistance | RON | 41 | 51 | mΩ | VINx = 1.8V; IOUT = 200mA; 25°C | 5 | |
| On-resistance | RON | 61 | mΩ | VINx = 1.8V; IOUT = 200mA; -40°C to 85°C | 5 | ||
| On-resistance | RON | 66 | mΩ | VINx = 1.8V; IOUT = 200mA; -40°C to 105°C | 5 | ||
| On-resistance | RON | 42 | 52 | mΩ | VINx = 1.6V; IOUT = 200mA; 25°C | 5 | |
| On-resistance | RON | 68 | mΩ | VINx = 1.6V; IOUT = 200mA; -40°C to 85°C | 5 | ||
| On-resistance | RON | 74 | mΩ | VINx = 1.6V; IOUT = 200mA; -40°C to 105°C | 5 | ||
| Status pin VOL | VOL,ST | 0.1 | V | IST = 1mA; -40°C to 105°C | 6 | ||
| Status pin response time | tST | 5 | us | ST pin pulled high to low; RST = 10kΩ; -40°C to 105°C | 6 | ||
| PR1 reference voltage | VREF | 0.92 | 1 | 1.08 | V | -40°C to 105°C | 6 |
| MODE logic high threshold | VIH,MODE | 1 | 5.5 | V | -40°C to 105°C | 6 | |
| MODE logic low threshold | VIL,MODE | 0 | 0.35 | V | -40°C to 105°C | 6 | |
| Reverse current blocking response time | tRCB | 2 | us | VOUT > Selected VIN + 1V; -40°C to 105°C | 6 | ||
| Reverse current blocking rising threshold (VOUT - VIN) | VRCB,R | 42 | 70 | mV | -40°C to 105°C | 6 | |
| Reverse current blocking falling threshold (VOUT - VIN) | VRCB,F | 17 | 40 | mV | -40°C to 105°C | 6 | |
| Reverse current blocking activation current | IRCB | 1.4 | 4 | A | -40°C to 105°C | 6 | |
| Thermal shutdown | TSD | 170 | °C | 6 | |||
| Thermal shutdown hysteresis | TSDHYS | 20 | °C | 7 |
CAD (Adom-generated)
- Symbol:
TPS2116DRLR - Footprint:
Adom_Gen:Texas_Instruments_TPS2116_1e2d2a - 3D model: generated to fit the land (STEP)
- 3D model files:
tps2116drlr-etched.step/tps2116drlr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps2116drlr.step/tps2116drlr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
5babd88afb84e2e6, retrieved 2026-11-06, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.