3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLT1058SW#PBF
Analog Devices · FET InputAmplifiers · SOIC-16-300mil
LT1058SW#PBF from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Amplifier A output; output short-circuit duration is indefinite. |
| 2 | -IN A | input | Amplifier A inverting input; input voltage must stay within ±20V and differential input within ±40V. |
| 3 | +IN A | input | Amplifier A non-inverting input; input voltage must stay within ±20V and differential input within ±40V. |
| 4 | V+ | power_in | Positive supply; total supply voltage is limited to ±20V absolute maximum. |
| 5 | +IN B | input | Amplifier B non-inverting input; input voltage must stay within ±20V and differential input within ±40V. |
| 6 | -IN B | input | Amplifier B inverting input; input voltage must stay within ±20V and differential input within ±40V. |
| 7 | OUT B | output | Amplifier B output; output short-circuit duration is indefinite. |
| 8 | NC | unconnected | No internal connection. |
| 9 | NC | unconnected | No internal connection. |
| 10 | OUT C | output | Amplifier C output; output short-circuit duration is indefinite. |
| 11 | -IN C | input | Amplifier C inverting input; input voltage must stay within ±20V and differential input within ±40V. |
| 12 | +IN C | input | Amplifier C non-inverting input; input voltage must stay within ±20V and differential input within ±40V. |
| 13 | V- | power_in | Negative supply; total supply voltage is limited to ±20V absolute maximum. |
| 14 | +IN D | input | Amplifier D non-inverting input; input voltage must stay within ±20V and differential input within ±40V. |
| 15 | -IN D | input | Amplifier D inverting input; input voltage must stay within ±20V and differential input within ±40V. |
| 16 | OUT D | output | Amplifier D output; output short-circuit duration is indefinite. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-16-300mil |
| Category | Amplifiers |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 0.35 | 2.5 | mV | SW package, VS = ±15V, TA = 25°C, VCM = 0V | 3 | |
| Input Offset Current | lOS | 5 | 50 | pA | Fully warmed up | 3 | |
| Input Bias Current | lB | -100 | 10 | 100 | pA | Fully warmed up | 3 |
| Large-Signal Voltage Gain | AVOL | 100 | 300 | V/mV | VO = ±10V, RL = 2k | 4 | |
| Large-Signal Voltage Gain | AVOL | 50 | 220 | V/mV | VO = ±10V, RL = 1k | 4 | |
| Common Mode Rejection Ratio (LT1058) | CMRR | 80 | 98 | dB | VCM = ±15V | 4 | |
| Power Supply Rejection Ratio | PSRR | 86 | 102 | dB | VS = ±10V to ±18V | 4 | |
| Output Voltage Swing | VOUT | -12 | 13 | V | RL = 2k | 4 | |
| Slew Rate | SR | 8 | 13 | V/µs | 4 | ||
| Gain-Bandwidth Product | GBW | 3 | 5 | MHz | f = 1MHz (Note 6) | 4 | |
| Supply Current Per Amplifier | IS | 1.7 | 2.8 | mA | 4 | ||
| Supply Voltage | -20 | 20 | V | 2 | |||
| Differential Input Voltage | -40 | 40 | V | 2 | |||
| Input Voltage | -20 | 20 | V | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering) | 300 | °C | 10 sec | 2 | |||
| Maximum Junction Temperature | TJMAX | 150 | °C | SW package | 2 | ||
| Operating Temperature Range (LT1058SW) | TA | 0 | 70 | °C | LT1058SW (commercial) | 5 | |
| Thermal Resistance, Junction to Ambient | θJA | 90 | °C/W | SW package | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | NOTE: LEAD DIMENSIONS APPLY TO SOLDER DIP/PLATE OR TIN PLATE LEADS | 14 |
CAD (KiCad official)
- Symbol:
LT1058SW#PBF - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
lt1058sw-etched.step/lt1058sw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1058sw.step/lt1058sw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
1cfc1e91ea879c76, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).