Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT1058SW#PBF

Analog Devices · FET InputAmplifiers · SOIC-16-300mil

LT1058SW#PBF from Analog Devices, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Amplifier A output; output short-circuit duration is indefinite.
2 -IN A input Amplifier A inverting input; input voltage must stay within ±20V and differential input within ±40V.
3 +IN A input Amplifier A non-inverting input; input voltage must stay within ±20V and differential input within ±40V.
4 V+ power_in Positive supply; total supply voltage is limited to ±20V absolute maximum.
5 +IN B input Amplifier B non-inverting input; input voltage must stay within ±20V and differential input within ±40V.
6 -IN B input Amplifier B inverting input; input voltage must stay within ±20V and differential input within ±40V.
7 OUT B output Amplifier B output; output short-circuit duration is indefinite.
8 NC unconnected No internal connection.
9 NC unconnected No internal connection.
10 OUT C output Amplifier C output; output short-circuit duration is indefinite.
11 -IN C input Amplifier C inverting input; input voltage must stay within ±20V and differential input within ±40V.
12 +IN C input Amplifier C non-inverting input; input voltage must stay within ±20V and differential input within ±40V.
13 V- power_in Negative supply; total supply voltage is limited to ±20V absolute maximum.
14 +IN D input Amplifier D non-inverting input; input voltage must stay within ±20V and differential input within ±40V.
15 -IN D input Amplifier D inverting input; input voltage must stay within ±20V and differential input within ±40V.
16 OUT D output Amplifier D output; output short-circuit duration is indefinite.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-16-300mil
Category Amplifiers
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 0.35 2.5 mV SW package, VS = ±15V, TA = 25°C, VCM = 0V 3
Input Offset Current lOS 5 50 pA Fully warmed up 3
Input Bias Current lB -100 10 100 pA Fully warmed up 3
Large-Signal Voltage Gain AVOL 100 300 V/mV VO = ±10V, RL = 2k 4
Large-Signal Voltage Gain AVOL 50 220 V/mV VO = ±10V, RL = 1k 4
Common Mode Rejection Ratio (LT1058) CMRR 80 98 dB VCM = ±15V 4
Power Supply Rejection Ratio PSRR 86 102 dB VS = ±10V to ±18V 4
Output Voltage Swing VOUT -12 13 V RL = 2k 4
Slew Rate SR 8 13 V/µs 4
Gain-Bandwidth Product GBW 3 5 MHz f = 1MHz (Note 6) 4
Supply Current Per Amplifier IS 1.7 2.8 mA 4
Supply Voltage -20 20 V 2
Differential Input Voltage -40 40 V 2
Input Voltage -20 20 V 2
Storage Temperature Range -65 150 °C 2
Lead Temperature (Soldering) 300 °C 10 sec 2
Maximum Junction Temperature TJMAX 150 °C SW package 2
Operating Temperature Range (LT1058SW) TA 0 70 °C LT1058SW (commercial) 5
Thermal Resistance, Junction to Ambient θJA 90 °C/W SW package 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin NOTE: LEAD DIMENSIONS APPLY TO SOLDER DIP/PLATE OR TIN PLATE LEADS 14

CAD (KiCad official)

  • Symbol: LT1058SW#PBF
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: lt1058sw-etched.step / lt1058sw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1058sw.step / lt1058sw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 1cfc1e91ea879c76, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF