component

TLV702475DBVR

Public Made by Adom

by adom

Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentpmictlv702475dbvr
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

TLV702475DBVR

Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

TLV702475DBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Unregulated input supply pin, 2 V to 5.5 V (6 V abs max). A small 1-µF ceramic capacitor from IN to GND is recommended for stability and good transient performance.
2 GND power_in Device ground reference. All voltages are referenced to this node.
3 EN input Enable input. Driving EN above 0.9 V turns the regulator on; driving EN below 0.4 V puts it in shutdown (~1 µA IQ). Absolute max is VIN + 0.3 V or 6.0 V (whichever is smaller). Enable current is ~0.04 µA at VEN=5.5 V. For TLV702P, OUT is discharged through an internal 120-Ω resistor when disabled.
4 NC unconnected No internal connection. May be tied to GND to improve thermal dissipation.
5 OUT power_out Regulated 4.75-V output pin (fixed for the '475' option), up to 300 mA. A 1-µF ceramic capacitor from OUT to GND is required for stability. Internally current-limited (typ 500 mA, min 320 mA).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • TLV702475DBVR
  • TLV702475DBVRDBVT
  • TLV702475DBVRDSER
  • TLV702475DBVRDSET

CAD (KiCad official)

  • Symbol: TLV702475DBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: tlv702475dbvr-etched.step / tlv702475dbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tlv702475dbvr.step / tlv702475dbvr.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
tlv702475dbvr.step 85 KB You want the bare part, or you mark your own boards.
tlv702475dbvr-etched.step 1.9 MB You want the part with TLV702475DBVR already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 489 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 5a8afc4236a17ab4, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF