Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISL32472EIBZ-T

RENESAS · RS-485 / RS-422 ICs · SOIC-8

ISL32472EIBZ-T from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output that is high if A-B is at least 10mV and low if A-B is at most 200mV as printed, and is high when A and B are floating, shorted, or on a terminated undriven bus.
2 RE input Receiver output enable: RO is enabled when RE is low and is high impedance when RE is high, with an internal pull-down to low.
3 DE input Driver output enable: the driver outputs Y and Z are enabled when DE is high and are high impedance when DE is low, with an internal pull-up to high.
4 DI input Driver input: a low on DI forces output Y low and output Z high, and a high on DI forces output Y high and output Z low.
5 GND power_in Ground connection.
6 A/Y bidirectional Non-inverting receiver input and non-inverting driver output, ±60V fault and ±16.5kV HBM ESD protected at RS-485/RS-422 levels; it is an input when DE = 0 and an output when DE = 1.
7 B/Z bidirectional Inverting receiver input and inverting driver output, ±60V fault and ±16.5kV HBM ESD protected at RS-485/RS-422 levels; it is an input when DE = 0 and an output when DE = 1.
8 VCC power_in System power supply input, specified at 4.5V to 5.5V.

Key specifications

Parameter Value
Manufacturer RENESAS
Package SOIC-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Driver Differential VOUT (Loaded) VOD2 2.4 3.2 V RL = 100Ω (RS-422) 5
Driver Differential VOUT (Loaded) VOD2 1.5 2.5 V RL = 54Ω (RS-485) 5
Driver Differential VOUT (Loaded) VOD2 2 2.5 V RL = 54Ω (PROFIBUS, VCC ≥ 5V) 5
Driver Differential VOUT (Loaded) VOD2 0.8 1.3 V RL = 21Ω (six 120Ω terminations for star configurations, VCC ≥ 4.75V) 5
Change in Magnitude of Driver Differential VOUT for Complementary Output States ΔVOD 0.2 V RL = 54Ω or 100Ω (Figure 5A) 5
Driver Differential VOUT with Common-Mode Load VOD3 1.5 2.1 V RL = 60Ω, -7V ≤ VCM ≤ 12V 5
Driver Differential VOUT with Common-Mode Load VOD3 1.7 2.3 V RL = 60Ω, -15V ≤ VCM ≤ 15V (VCC ≥ 4.75V) 5
Change in Magnitude of Driver Common-Mode VOUT for Complementary Output States ΔVOC 0.2 V RL = 54Ω or 100Ω (Figure 5A) 5
Driver Common-Mode VOUT VOC -1 3 V RL = 54Ω or 100Ω 5
Driver Short-Circuit Current IOSD -250 250 mA DE = VCC, -15V ≤ VO ≤ 15V (Note 10) 5
Driver Short-Circuit Current at first foldback IOSD1 -83 83 mA At first foldback, 22V ≤ VO ≤ -22V 5
Driver Short-Circuit Current at second foldback IOSD2 -13 13 mA At second foldback, 35V ≤ VO ≤ -35V 5
Logic Input High Voltage VIH 2.5 V DE, DI, RE 5
Logic Input Low Voltage VIL 0.8 V DE, DI, RE 5
Logic Input Current (DI) IIN1 -1 1 µA DI 5
Logic Input Current (DE, RE) IIN1 -15 6 15 µA DE, RE 5
Input/Output Current (A/Y, B/Z) IIN2 110 250 µA DE = 0V, VCC = 0V or 5.5V; VIN = 12V 6
Input/Output Current (A/Y, B/Z) IIN2 -200 -75 µA DE = 0V, VCC = 0V or 5.5V; VIN = -7V 6
Input/Output Current (A/Y, B/Z) IIN2 -800 800 µA DE = 0V, VCC = 0V or 5.5V; VIN = ±15V 6
Input/Output Current (A/Y, B/Z) IIN2 -6 6 mA DE = 0V, VCC = 0V or 5.5V; VIN = ±60V (Note 18) 6
Receiver Differential Threshold Voltage VTH -200 -100 -10 mV -15V ≤ VCM ≤ 15V 6
Receiver Output High Voltage VOH 2.8 4.2 V IO = -8mA, VID = -10mV 6
Receiver Output Low Voltage VOL 0.27 0.4 V IO = 6mA, VID = -200mV 6
Receiver Output Low Current IOL 15 22 mA VO = 1V, VID = -200mV 6
Three-State (High Impedance) Receiver Output Current IOZR -1 0.01 1 µA 0V ≤ VO ≤ VCC 6
No-Load Supply Current ICC 2.3 4.5 mA DE = VCC, RE = 0V or VCC, DI = 0V or VCC (Note 9) 6
Shutdown Supply Current ISHDN 10 50 µA DE = 0V, RE = VCC, DI = 0V or VCC 6
Driver Differential Output Delay (250kbps) tPLH, tPHL 320 450 ns RD = 54Ω, CD = 50pF (Figure 6) 6
Driver Differential Output Skew (250kbps) tSKEW 6 30 ns RD = 54Ω, CD = 50pF (Figure 6) 6
Driver Differential Rise or Fall Time (250kbps) tR, tF 400 650 1200 ns RD = 54Ω, CD = 50pF (Figure 6) 6
Maximum Data Rate (driver, 250kbps) fMAX 0.25 1.5 Mbps CD = 820pF (Figure 8) 7
Driver Enable to Output High (250kbps) tZH 1200 ns SW = GND (Figure 7), (Note 11) 7
Driver Enable to Output Low (250kbps) tZL 1200 ns SW = VCC (Figure 7), (Note 11) 7
Driver Disable from Output Low (250kbps) tLZ 120 ns SW = VCC (Figure 7) 7
Driver Disable from Output High (250kbps) tHZ 120 ns SW = GND (Figure 7) 7
Time to Shutdown (driver section) tSHDN 60 160 600 ns (Note 13) 7
Driver Enable from Shutdown to Output High (250kbps) tZH(SHDN) 2500 ns SW = GND (Figure 7), (Notes 13, 14) 7
Driver Enable from Shutdown to Output Low (250kbps) tZL(SHDN) 2500 ns SW = VCC (Figure 7), (Notes 13, 14) 7
Maximum Data Rate (receiver, 250kbps) fMAX 0.25 5 Mbps (Figure 9) 8
Receiver Input to Output Delay (250kbps) tPLH, tPHL 200 280 ns (Figure 9) 8
Receiver Skew (250kbps) tSKD 4 10 ns (Figure 9) 8
Receiver Enable to Output Low (250kbps) tZL 50 ns RL = 1kΩ, CL = 15pF, SW = VCC (Figure 10), (Note 12) 8
Receiver Enable to Output High (250kbps) tZH 50 ns RL = 1kΩ, CL = 15pF, SW = GND (Figure 10), (Note 12) 8
Receiver Disable from Output Low (250kbps) tLZ 50 ns RL = 1kΩ, CL = 15pF, SW = VCC (Figure 10) 8
Receiver Disable from Output High (250kbps) tHZ 50 ns RL = 1kΩ, CL = 15pF, SW = GND (Figure 10) 8
Time to Shutdown (receiver section) tSHDN 60 160 600 ns (Note 13) 8
Receiver Enable from Shutdown to Output High (250kbps) tZH(SHDN) 2000 ns RL = 1kΩ, CL = 15pF, SW = GND (Figure 10), (Notes 13, 15) 8
Receiver Enable from Shutdown to Output Low (250kbps) tZL(SHDN) 2000 ns RL = 1kΩ, CL = 15pF, SW = VCC (Figure 10), (Notes 13, 15) 8
VCC to Ground VCC 7 V 5
Input Voltages (DI, DE, RE) -0.3 V to (VCC + 0.3V) 5
Input/Output Voltages (A/Y, B/Z, A, B, Y, Z) -60 60 V ±60V as printed 5
Input/Output Voltages transient pulse through 100Ω (Note 17) -80 80 V ±80V as printed, transient pulse through 100Ω (Note 17) 5
RO Output Voltage -0.3 V to (VCC +0.3V) 5
Maximum Junction Temperature (Plastic Package) 150 °C 5
Maximum Storage Temperature Range -65 150 °C 5
Supply Voltage (VCC) VCC 5 V 5
Temperature Range -40 85 °C 5
Bus Pin Common-Mode Voltage Range VCM -15 15 V 5
Thermal Resistance Junction-to-Ambient (8 Ld SOIC) θJA 108 °C/W 8 Ld SOIC package (Notes 6, 7) 5
Thermal Resistance Junction-to-Case (8 Ld SOIC) θJC 47 °C/W 8 Ld SOIC package (Notes 6, 7) 5

CAD (KiCad official)

  • Symbol: ISL32472EIBZ-T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: isl32472eibz-t-etched.step / isl32472eibz-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isl32472eibz-t.step / isl32472eibz-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (21 pp, sha256 d78425ae58ecdc0d, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF