3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownISL32472EIBZ-T
RENESAS · RS-485 / RS-422 ICs · SOIC-8
ISL32472EIBZ-T from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output that is high if A-B is at least 10mV and low if A-B is at most 200mV as printed, and is high when A and B are floating, shorted, or on a terminated undriven bus. |
| 2 | RE | input | Receiver output enable: RO is enabled when RE is low and is high impedance when RE is high, with an internal pull-down to low. |
| 3 | DE | input | Driver output enable: the driver outputs Y and Z are enabled when DE is high and are high impedance when DE is low, with an internal pull-up to high. |
| 4 | DI | input | Driver input: a low on DI forces output Y low and output Z high, and a high on DI forces output Y high and output Z low. |
| 5 | GND | power_in | Ground connection. |
| 6 | A/Y | bidirectional | Non-inverting receiver input and non-inverting driver output, ±60V fault and ±16.5kV HBM ESD protected at RS-485/RS-422 levels; it is an input when DE = 0 and an output when DE = 1. |
| 7 | B/Z | bidirectional | Inverting receiver input and inverting driver output, ±60V fault and ±16.5kV HBM ESD protected at RS-485/RS-422 levels; it is an input when DE = 0 and an output when DE = 1. |
| 8 | VCC | power_in | System power supply input, specified at 4.5V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Driver Differential VOUT (Loaded) | VOD2 | 2.4 | 3.2 | V | RL = 100Ω (RS-422) | 5 | |
| Driver Differential VOUT (Loaded) | VOD2 | 1.5 | 2.5 | V | RL = 54Ω (RS-485) | 5 | |
| Driver Differential VOUT (Loaded) | VOD2 | 2 | 2.5 | V | RL = 54Ω (PROFIBUS, VCC ≥ 5V) | 5 | |
| Driver Differential VOUT (Loaded) | VOD2 | 0.8 | 1.3 | V | RL = 21Ω (six 120Ω terminations for star configurations, VCC ≥ 4.75V) | 5 | |
| Change in Magnitude of Driver Differential VOUT for Complementary Output States | ΔVOD | 0.2 | V | RL = 54Ω or 100Ω (Figure 5A) | 5 | ||
| Driver Differential VOUT with Common-Mode Load | VOD3 | 1.5 | 2.1 | V | RL = 60Ω, -7V ≤ VCM ≤ 12V | 5 | |
| Driver Differential VOUT with Common-Mode Load | VOD3 | 1.7 | 2.3 | V | RL = 60Ω, -15V ≤ VCM ≤ 15V (VCC ≥ 4.75V) | 5 | |
| Change in Magnitude of Driver Common-Mode VOUT for Complementary Output States | ΔVOC | 0.2 | V | RL = 54Ω or 100Ω (Figure 5A) | 5 | ||
| Driver Common-Mode VOUT | VOC | -1 | 3 | V | RL = 54Ω or 100Ω | 5 | |
| Driver Short-Circuit Current | IOSD | -250 | 250 | mA | DE = VCC, -15V ≤ VO ≤ 15V (Note 10) | 5 | |
| Driver Short-Circuit Current at first foldback | IOSD1 | -83 | 83 | mA | At first foldback, 22V ≤ VO ≤ -22V | 5 | |
| Driver Short-Circuit Current at second foldback | IOSD2 | -13 | 13 | mA | At second foldback, 35V ≤ VO ≤ -35V | 5 | |
| Logic Input High Voltage | VIH | 2.5 | V | DE, DI, RE | 5 | ||
| Logic Input Low Voltage | VIL | 0.8 | V | DE, DI, RE | 5 | ||
| Logic Input Current (DI) | IIN1 | -1 | 1 | µA | DI | 5 | |
| Logic Input Current (DE, RE) | IIN1 | -15 | 6 | 15 | µA | DE, RE | 5 |
| Input/Output Current (A/Y, B/Z) | IIN2 | 110 | 250 | µA | DE = 0V, VCC = 0V or 5.5V; VIN = 12V | 6 | |
| Input/Output Current (A/Y, B/Z) | IIN2 | -200 | -75 | µA | DE = 0V, VCC = 0V or 5.5V; VIN = -7V | 6 | |
| Input/Output Current (A/Y, B/Z) | IIN2 | -800 | 800 | µA | DE = 0V, VCC = 0V or 5.5V; VIN = ±15V | 6 | |
| Input/Output Current (A/Y, B/Z) | IIN2 | -6 | 6 | mA | DE = 0V, VCC = 0V or 5.5V; VIN = ±60V (Note 18) | 6 | |
| Receiver Differential Threshold Voltage | VTH | -200 | -100 | -10 | mV | -15V ≤ VCM ≤ 15V | 6 |
| Receiver Output High Voltage | VOH | 2.8 | 4.2 | V | IO = -8mA, VID = -10mV | 6 | |
| Receiver Output Low Voltage | VOL | 0.27 | 0.4 | V | IO = 6mA, VID = -200mV | 6 | |
| Receiver Output Low Current | IOL | 15 | 22 | mA | VO = 1V, VID = -200mV | 6 | |
| Three-State (High Impedance) Receiver Output Current | IOZR | -1 | 0.01 | 1 | µA | 0V ≤ VO ≤ VCC | 6 |
| No-Load Supply Current | ICC | 2.3 | 4.5 | mA | DE = VCC, RE = 0V or VCC, DI = 0V or VCC (Note 9) | 6 | |
| Shutdown Supply Current | ISHDN | 10 | 50 | µA | DE = 0V, RE = VCC, DI = 0V or VCC | 6 | |
| Driver Differential Output Delay (250kbps) | tPLH, tPHL | 320 | 450 | ns | RD = 54Ω, CD = 50pF (Figure 6) | 6 | |
| Driver Differential Output Skew (250kbps) | tSKEW | 6 | 30 | ns | RD = 54Ω, CD = 50pF (Figure 6) | 6 | |
| Driver Differential Rise or Fall Time (250kbps) | tR, tF | 400 | 650 | 1200 | ns | RD = 54Ω, CD = 50pF (Figure 6) | 6 |
| Maximum Data Rate (driver, 250kbps) | fMAX | 0.25 | 1.5 | Mbps | CD = 820pF (Figure 8) | 7 | |
| Driver Enable to Output High (250kbps) | tZH | 1200 | ns | SW = GND (Figure 7), (Note 11) | 7 | ||
| Driver Enable to Output Low (250kbps) | tZL | 1200 | ns | SW = VCC (Figure 7), (Note 11) | 7 | ||
| Driver Disable from Output Low (250kbps) | tLZ | 120 | ns | SW = VCC (Figure 7) | 7 | ||
| Driver Disable from Output High (250kbps) | tHZ | 120 | ns | SW = GND (Figure 7) | 7 | ||
| Time to Shutdown (driver section) | tSHDN | 60 | 160 | 600 | ns | (Note 13) | 7 |
| Driver Enable from Shutdown to Output High (250kbps) | tZH(SHDN) | 2500 | ns | SW = GND (Figure 7), (Notes 13, 14) | 7 | ||
| Driver Enable from Shutdown to Output Low (250kbps) | tZL(SHDN) | 2500 | ns | SW = VCC (Figure 7), (Notes 13, 14) | 7 | ||
| Maximum Data Rate (receiver, 250kbps) | fMAX | 0.25 | 5 | Mbps | (Figure 9) | 8 | |
| Receiver Input to Output Delay (250kbps) | tPLH, tPHL | 200 | 280 | ns | (Figure 9) | 8 | |
| Receiver Skew (250kbps) | tSKD | 4 | 10 | ns | (Figure 9) | 8 | |
| Receiver Enable to Output Low (250kbps) | tZL | 50 | ns | RL = 1kΩ, CL = 15pF, SW = VCC (Figure 10), (Note 12) | 8 | ||
| Receiver Enable to Output High (250kbps) | tZH | 50 | ns | RL = 1kΩ, CL = 15pF, SW = GND (Figure 10), (Note 12) | 8 | ||
| Receiver Disable from Output Low (250kbps) | tLZ | 50 | ns | RL = 1kΩ, CL = 15pF, SW = VCC (Figure 10) | 8 | ||
| Receiver Disable from Output High (250kbps) | tHZ | 50 | ns | RL = 1kΩ, CL = 15pF, SW = GND (Figure 10) | 8 | ||
| Time to Shutdown (receiver section) | tSHDN | 60 | 160 | 600 | ns | (Note 13) | 8 |
| Receiver Enable from Shutdown to Output High (250kbps) | tZH(SHDN) | 2000 | ns | RL = 1kΩ, CL = 15pF, SW = GND (Figure 10), (Notes 13, 15) | 8 | ||
| Receiver Enable from Shutdown to Output Low (250kbps) | tZL(SHDN) | 2000 | ns | RL = 1kΩ, CL = 15pF, SW = VCC (Figure 10), (Notes 13, 15) | 8 | ||
| VCC to Ground | VCC | 7 | V | 5 | |||
| Input Voltages (DI, DE, RE) | -0.3 | V | to (VCC + 0.3V) | 5 | |||
| Input/Output Voltages (A/Y, B/Z, A, B, Y, Z) | -60 | 60 | V | ±60V as printed | 5 | ||
| Input/Output Voltages transient pulse through 100Ω (Note 17) | -80 | 80 | V | ±80V as printed, transient pulse through 100Ω (Note 17) | 5 | ||
| RO Output Voltage | -0.3 | V | to (VCC +0.3V) | 5 | |||
| Maximum Junction Temperature (Plastic Package) | 150 | °C | 5 | ||||
| Maximum Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Supply Voltage (VCC) | VCC | 5 | V | 5 | |||
| Temperature Range | -40 | 85 | °C | 5 | |||
| Bus Pin Common-Mode Voltage Range | VCM | -15 | 15 | V | 5 | ||
| Thermal Resistance Junction-to-Ambient (8 Ld SOIC) | θJA | 108 | °C/W | 8 Ld SOIC package (Notes 6, 7) | 5 | ||
| Thermal Resistance Junction-to-Case (8 Ld SOIC) | θJC | 47 | °C/W | 8 Ld SOIC package (Notes 6, 7) | 5 |
CAD (KiCad official)
- Symbol:
ISL32472EIBZ-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
isl32472eibz-t-etched.step/isl32472eibz-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl32472eibz-t.step/isl32472eibz-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (21 pp, sha256
d78425ae58ecdc0d, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).