3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLMH6611MKX
Texas Instruments · Operational Amplifier · TSOT-23-6
LMH6611MKX from Texas Instruments, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Amplifier output, rail-to-rail, linear output current ±100 mA at 5 V; do not short-circuit the output, and continuous source or sink currents larger than the typical IOUT are not recommended. |
| 2 | V- | power_in | Negative supply rail; the supply span is 2.7 V to 11 V (VS = V+ − V−), and it is the ground reference for single-supply operation. |
| 3 | +IN | input | Non-inverting input; the input common-mode range is −0.2 V to 3.8 V at 5 V supply (−0.2 V to 1.8 V at 3 V supply). |
| 4 | -IN | input | Inverting input; it shares the same input common-mode range as +IN, −0.2 V to 3.8 V at 5 V supply. |
| 5 | DISABLE | input | Active-low disable pin: below 2.0 V (5 V supply) the amplifier is disabled with about 120 µA typical shutdown current, and above 3.0 V it is enabled; it can be tied to V+ through a resistor or left floating for normal operation. |
| 6 | V+ | power_in | Positive supply rail; the supply span is 2.7 V to 11 V (VS = V+ − V−). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSOT-23-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (LMH6611) | VOS | -1.5 | 0.013 | 1.5 | mV | VCM = 0.5V | 5 |
| Input Offset Voltage (LMH6611), boldface limit at temperature extremes | VOS | -2 | 0.013 | 2 | mV | VCM = 0.5V, boldface (temperature extremes) | 5 |
| Input Bias Current | IB | -10.1 | -6.3 | µA | VCM = 0.5V | 5 | |
| Input Bias Current, boldface limit at temperature extremes | IB | -11.1 | -6.3 | µA | VCM = 0.5V, boldface (temperature extremes) | 5 | |
| Input Offset Current | IO | -0.5 | 0.01 | 0.5 | µA | 5 | |
| Input Offset Current, boldface limit at temperature extremes | IO | -0.7 | 0.01 | 0.7 | µA | boldface (temperature extremes) | 5 |
| Input Voltage Range | CMVR | -0.2 | 3.8 | V | DC, CMRR ≥ 78 dB | 5 | |
| Gain Bandwidth (LMH6611) | GBW | 115 | 135 | MHz | AV = 10, RF = 2 kΩ, RG = 221Ω, RL = 1 kΩ, VOUT = 0.2 VPP | 5 | |
| Common Mode Rejection Ratio | CMRR | 81 | 98 | dB | VCM Stepped from −0.1V to 3.7V | 6 | |
| Open Loop Gain | AOL | 92 | 103 | dB | RL = 1 kΩ, VOUT = 4.6V to 0.4V | 6 | |
| Open Loop Gain | AOL | 80 | 86 | dB | RL = 150Ω, VOUT = 4.4V to 0.6V | 6 | |
| Output Swing High (LMH6611), from V+ supply rail | VO | 76 | 90 | mV | RL = 1 kΩ to V+/2 | 6 | |
| Output Swing High (LMH6611), from V+ supply rail, boldface limit | VO | 76 | 93 | mV | RL = 1 kΩ to V+/2, boldface (temperature extremes) | 6 | |
| Output Swing High (LMH6611), from V+ supply rail | VO | 195 | 239 | mV | RL = 150Ω to V+/2 | 6 | |
| Output Swing High (LMH6611), from V+ supply rail, boldface limit | VO | 195 | 256 | mV | RL = 150Ω to V+/2, boldface (temperature extremes) | 6 | |
| Output Swing Low (LMH6611), from V- supply rail | VO | 74 | 92 | mV | RL = 1 kΩ to V+/2 | 6 | |
| Output Swing Low (LMH6611), from V- supply rail, boldface limit | VO | 74 | 98 | mV | RL = 1 kΩ to V+/2, boldface (temperature extremes) | 6 | |
| Output Swing Low (LMH6611), from V- supply rail | VO | 193 | 243 | mV | RL = 150Ω to V+/2 | 6 | |
| Output Swing Low (LMH6611), from V- supply rail, boldface limit | VO | 193 | 265 | mV | RL = 150Ω to V+/2, boldface (temperature extremes) | 6 | |
| Output Swing Low (LMH6611), from V- supply rail | VO | 48 | 60 | mV | RL = 150Ω to V- | 6 | |
| Output Swing Low (LMH6611), from V- supply rail, boldface limit | VO | 48 | 64 | mV | RL = 150Ω to V-, boldface (temperature extremes) | 6 | |
| Linear Output Current | IOUT | -100 | 100 | mA | VOUT = V+/2 | 6 | |
| Power Supply Rejection Ratio | PSRR | 81 | 96 | dB | DC, VCM = 0.5V, VS = 2.7V to 11V | 6 | |
| Supply Current (LMH6611) | IS | 3.2 | 3.6 | mA | RL = ∞ | 6 | |
| Supply Current (LMH6611), boldface limit at temperature extremes | IS | 3.2 | 4 | mA | RL = ∞, boldface (temperature extremes) | 6 | |
| Disable Shutdown Current (LMH6611) | ISD | 120 | 162 | µA | DISABLE = 0V | 6 | |
| Supply Voltage (VS = V+ − V−) | VS | 2.7 | 11 | V | 2 | ||
| Ambient Temperature Range | TA | -40 | 125 | °C | 2 | ||
| Supply Voltage (VS = V+ − V−) | VS | 12 | V | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| ESD Tolerance, Human Body Model | 2000 | V | input pins only | 2 | |||
| ESD Tolerance, Machine Model | 200 | V | 2 | ||||
| ESD Tolerance, Charge Device Model | 1000 | V | 2 | ||||
| Package Thermal Resistance, 6-Pin SOT | θJA | 231 | °C/W | package soldered directly onto PC board | 2 |
CAD (KiCad official)
- Symbol:
LMH6611MKX - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lmh6611mkx-etched.step/lmh6611mkx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lmh6611mkx.step/lmh6611mkx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (46 pp, sha256
36161a520fad4c0b, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).