Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMH6611MKX

Texas Instruments · Operational Amplifier · TSOT-23-6

LMH6611MKX from Texas Instruments, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT output Amplifier output, rail-to-rail, linear output current ±100 mA at 5 V; do not short-circuit the output, and continuous source or sink currents larger than the typical IOUT are not recommended.
2 V- power_in Negative supply rail; the supply span is 2.7 V to 11 V (VS = V+ − V−), and it is the ground reference for single-supply operation.
3 +IN input Non-inverting input; the input common-mode range is −0.2 V to 3.8 V at 5 V supply (−0.2 V to 1.8 V at 3 V supply).
4 -IN input Inverting input; it shares the same input common-mode range as +IN, −0.2 V to 3.8 V at 5 V supply.
5 DISABLE input Active-low disable pin: below 2.0 V (5 V supply) the amplifier is disabled with about 120 µA typical shutdown current, and above 3.0 V it is enabled; it can be tied to V+ through a resistor or left floating for normal operation.
6 V+ power_in Positive supply rail; the supply span is 2.7 V to 11 V (VS = V+ − V−).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSOT-23-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage (LMH6611) VOS -1.5 0.013 1.5 mV VCM = 0.5V 5
Input Offset Voltage (LMH6611), boldface limit at temperature extremes VOS -2 0.013 2 mV VCM = 0.5V, boldface (temperature extremes) 5
Input Bias Current IB -10.1 -6.3 µA VCM = 0.5V 5
Input Bias Current, boldface limit at temperature extremes IB -11.1 -6.3 µA VCM = 0.5V, boldface (temperature extremes) 5
Input Offset Current IO -0.5 0.01 0.5 µA 5
Input Offset Current, boldface limit at temperature extremes IO -0.7 0.01 0.7 µA boldface (temperature extremes) 5
Input Voltage Range CMVR -0.2 3.8 V DC, CMRR ≥ 78 dB 5
Gain Bandwidth (LMH6611) GBW 115 135 MHz AV = 10, RF = 2 kΩ, RG = 221Ω, RL = 1 kΩ, VOUT = 0.2 VPP 5
Common Mode Rejection Ratio CMRR 81 98 dB VCM Stepped from −0.1V to 3.7V 6
Open Loop Gain AOL 92 103 dB RL = 1 kΩ, VOUT = 4.6V to 0.4V 6
Open Loop Gain AOL 80 86 dB RL = 150Ω, VOUT = 4.4V to 0.6V 6
Output Swing High (LMH6611), from V+ supply rail VO 76 90 mV RL = 1 kΩ to V+/2 6
Output Swing High (LMH6611), from V+ supply rail, boldface limit VO 76 93 mV RL = 1 kΩ to V+/2, boldface (temperature extremes) 6
Output Swing High (LMH6611), from V+ supply rail VO 195 239 mV RL = 150Ω to V+/2 6
Output Swing High (LMH6611), from V+ supply rail, boldface limit VO 195 256 mV RL = 150Ω to V+/2, boldface (temperature extremes) 6
Output Swing Low (LMH6611), from V- supply rail VO 74 92 mV RL = 1 kΩ to V+/2 6
Output Swing Low (LMH6611), from V- supply rail, boldface limit VO 74 98 mV RL = 1 kΩ to V+/2, boldface (temperature extremes) 6
Output Swing Low (LMH6611), from V- supply rail VO 193 243 mV RL = 150Ω to V+/2 6
Output Swing Low (LMH6611), from V- supply rail, boldface limit VO 193 265 mV RL = 150Ω to V+/2, boldface (temperature extremes) 6
Output Swing Low (LMH6611), from V- supply rail VO 48 60 mV RL = 150Ω to V- 6
Output Swing Low (LMH6611), from V- supply rail, boldface limit VO 48 64 mV RL = 150Ω to V-, boldface (temperature extremes) 6
Linear Output Current IOUT -100 100 mA VOUT = V+/2 6
Power Supply Rejection Ratio PSRR 81 96 dB DC, VCM = 0.5V, VS = 2.7V to 11V 6
Supply Current (LMH6611) IS 3.2 3.6 mA RL = ∞ 6
Supply Current (LMH6611), boldface limit at temperature extremes IS 3.2 4 mA RL = ∞, boldface (temperature extremes) 6
Disable Shutdown Current (LMH6611) ISD 120 162 µA DISABLE = 0V 6
Supply Voltage (VS = V+ − V−) VS 2.7 11 V 2
Ambient Temperature Range TA -40 125 °C 2
Supply Voltage (VS = V+ − V−) VS 12 V 2
Junction Temperature 150 °C 2
ESD Tolerance, Human Body Model 2000 V input pins only 2
ESD Tolerance, Machine Model 200 V 2
ESD Tolerance, Charge Device Model 1000 V 2
Package Thermal Resistance, 6-Pin SOT θJA 231 °C/W package soldered directly onto PC board 2

CAD (KiCad official)

  • Symbol: LMH6611MKX
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: lmh6611mkx-etched.step / lmh6611mkx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmh6611mkx.step / lmh6611mkx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (46 pp, sha256 36161a520fad4c0b, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF