Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STM32L052K8U3TR

STMicroelectronics · ST Microelectronics · UFQFPN-32(5x5)

STM32L052K8U3TR from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VDD power_in Digital supply pin; the device operates from a 1.65 V to 3.6 V power supply.
2 PC14-OSC32_IN bidirectional 5 V tolerant I/O (FT) that also serves as OSC32_IN, the input of the 32 kHz LSE oscillator.
3 PC15-OSC32_OUT bidirectional Standard 3.3 V I/O (TC) that also serves as OSC32_OUT, the output of the 32 kHz LSE oscillator.
4 NRST bidirectional Bidirectional reset pin with embedded weak pull-up resistor.
5 VDDA power_in Analog supply pin (VDDA) referenced in the datasheet's general operating conditions and ADC/reference specifications.
6 PA0 bidirectional Standard 3.3 V I/O (TC) with alternate functions TIM2_CH1, TSC_G1_IO1, USART2_CTS, TIM2_ETR and COMP1_OUT, and additional functions ADC_IN0, COMP1_INM6 and RTC_TAMP2/WKUP1.
7 PA1 bidirectional 5 V tolerant I/O (FT) with alternate functions EVENTOUT, TIM2_CH2, TSC_G1_IO2, USART2_RTS/USART2_DE and TIM21_ETR, and additional functions ADC_IN1 and COMP1_INP.
8 PA2 bidirectional 5 V tolerant I/O (FT) with alternate functions TIM21_CH1, TIM2_CH3, TSC_G1_IO3, USART2_TX and COMP2_OUT, and additional functions ADC_IN2 and COMP2_INM6.
9 PA3 bidirectional 5 V tolerant I/O (FT) with alternate functions TIM21_CH2, TIM2_CH4, TSC_G1_IO4 and USART2_RX, and additional functions ADC_IN3 and COMP2_INP.
10 PA4 bidirectional Standard 3.3 V I/O (TC) offering reduced touch sensing sensitivity, so it is recommended to use it as a sampling capacitor I/O; alternate functions include SPI1_NSS, TSC_G2_IO1, USART2_CK and TIM22_ETR, and additional functions ADC_IN4 and DAC_OUT.
11 PA5 bidirectional Standard 3.3 V I/O (TC) with alternate functions SPI1_SCK, TIM2_ETR, TSC_G2_IO2 and TIM2_CH1, and additional functions ADC_IN5, COMP1_INM5 and COMP2_INM5.
12 PA6 bidirectional 5 V tolerant I/O (FT) with alternate functions SPI1_MISO, TSC_G2_IO3, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT, and additional function ADC_IN6.
13 PA7 bidirectional 5 V tolerant I/O (FT) with alternate functions SPI1_MOSI, TSC_G2_IO4, TIM22_CH2, EVENTOUT and COMP2_OUT, and additional function ADC_IN7.
14 PB0 bidirectional 5 V tolerant I/O (FT) with alternate functions EVENTOUT and TSC_G3_IO2, and additional functions ADC_IN8 and VREF_OUT.
15 PB1 bidirectional 5 V tolerant I/O (FT) with alternate functions TSC_G3_IO3 and LPUART1_RTS/LPUART1_DE, and additional functions ADC_IN9 and VREF_OUT.
16 PB2 bidirectional 5 V tolerant I/O (FT) with alternate functions LPTIM1_OUT and TSC_G3_IO4.
17 VDD power_in Digital supply pin; the device operates from a 1.65 V to 3.6 V power supply.
18 PA8 bidirectional 5 V tolerant I/O (FT) with alternate functions MCO, USB_CRS_SYNC, EVENTOUT and USART1_CK.
19 PA9 bidirectional 5 V tolerant I/O (FT) with alternate functions MCO, TSC_G4_IO1 and USART1_TX.
20 PA10 bidirectional 5 V tolerant I/O (FT) with alternate functions TSC_G4_IO2 and USART1_RX.
21 PA11 bidirectional 5 V tolerant I/O (FT) powered by VDD_USB, with alternate functions SPI1_MISO, EVENTOUT, TSC_G4_IO3, USART1_CTS and COMP1_OUT, and additional function USB_DM.
22 PA12 bidirectional 5 V tolerant I/O (FT) powered by VDD_USB, with alternate functions SPI1_MOSI, EVENTOUT, TSC_G4_IO4, USART1_RTS/USART1_DE and COMP2_OUT, and additional function USB_DP.
23 PA13 bidirectional 5 V tolerant I/O (FT) with alternate functions SWDIO and USB_NOE.
24 PA14 bidirectional 5 V tolerant I/O (FT) with alternate functions SWCLK and USART2_TX.
25 PA15 bidirectional 5 V tolerant I/O (FT) with alternate functions SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX and TIM2_CH1.
26 PB3 bidirectional 5 V tolerant I/O (FT) with alternate functions SPI1_SCK, TIM2_CH2, TSC_G5I_O1 and EVENTOUT, and additional function COMP2_INN.
27 PB4 bidirectional 5 V tolerant I/O (FT) with alternate functions SPI1_MISO, EVENTOUT, TSC_G5_IO2 and TIM22_CH1, and additional function COMP2_INP.
28 PB5 bidirectional 5 V tolerant I/O (FT) with alternate functions SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA and TIM22_CH2, and additional function COMP2_INP.
29 PB6 bidirectional 5 V tolerant, FM+ capable I/O (FTf) with alternate functions USART1_TX, I2C1_SCL, LPTIM1_ETR and TSC_G5_IO3, and additional function COMP2_INP.
30 PB7 bidirectional 5 V tolerant, FM+ capable I/O (FTf) with alternate functions USART1_RX, I2C1_SDA, LPTIM1_IN2 and TSC_G5_IO4, and additional functions COMP2_INP and PVD_IN.
31 BOOT0 input Dedicated BOOT0 pin (structure B) per the pin-definition legend; its boot-mode behaviour is described in the boot modes section, which is not in this extract.
32 PB8 bidirectional 5 V tolerant, FM+ capable I/O (FTf) with alternate functions TSC_SYNC and I2C1_SCL.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package UFQFPN-32(5x5)
Category Embedded Processors & Controllers
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
External main supply voltage (VDD-VSS) VDD-VSS -0.3 4 V Including VDDA, VDD_USB, VDD 56
Variations between different VDDx power pins /ΔVDD/ 50 mV 56
Variations between any VDDx and VDDA power pins /VDDA-VDDx/ 300 mV 56
Variations between all different ground pins /ΔVSS/ 50 mV 56
Total current into sum of all VDD power lines (source) ΣIVDD 105 mA 57
Total current out of sum of all VSS ground lines (sink) ΣIVSS 105 mA 57
Total current into VDD_USB power lines (source) ΣIVDD_USB 25 mA 57
Maximum current into each VDD power pin (source) IVDD(PIN) 100 mA 57
Maximum current out of each VSS ground pin (sink) IVSS(PIN) 100 mA 57
Output current sunk by any I/O and control pin except FTf pins IIO 16 mA Except FTf pins 57
Output current sunk by FTf pins IIO 22 mA FTf pins 57
Output current sourced by any I/O and control pin IIO -16 mA 57
Total output current sunk by sum of all IOs and control pins ΣIIO(PIN) 90 mA Except PA11 and PA12 57
Total output current sunk by PA11 and PA12 ΣIIO(PIN) 25 mA PA11 and PA12 57
Total output current sourced by sum of all IOs and control pins ΣIIO(PIN) -90 mA 57
Injected current on FT, FTf, RST and B pins IINJ(PIN) -5 0 mA Printed as -5/+0 57
Injected current on TC pin IINJ(PIN) -5 5 mA Printed as ±5 57
Total injected current (sum of all I/O and control pins) ΣIINJ(PIN) -25 25 mA Printed as ±25 57
Storage temperature range TSTG -65 150 °C 57
Maximum junction temperature TJ 150 °C 57
Internal AHB clock frequency fHCLK 0 32 MHz 58
Standard operating voltage VDD 1.65 3.6 V BOR detector disabled 58
Standard operating voltage VDD 1.8 3.6 V BOR detector enabled, at power-on 58
Analog operating voltage (DAC not used) VDDA 1.65 3.6 V DAC not used; must be the same voltage as VDD 58
Analog operating voltage (all features) VDDA 1.8 3.6 V All features; must be the same voltage as VDD 58
Standard operating voltage, USB domain VDD_USB 3 3.6 V USB peripheral used 58
Standard operating voltage, USB domain VDD_USB 0 3.6 V USB peripheral not used 58
Input voltage on FT, FTf and RST pins VIN -0.3 5.5 V 2.0 V ≤ VDD ≤ 3.6 V 58
Input voltage on FT, FTf and RST pins VIN -0.3 5.2 V 1.65 V ≤ VDD ≤ 2.0 V 58
Input voltage on BOOT0 pin VIN 0 5.5 V 58
Power dissipation at TA = 85 °C (range 6) or 105 °C (range 7), UFQFPN32 PD 526 mW UFQFPN32 package 58
Power dissipation at TA = 125 °C (range 3), UFQFPN32 PD 132 mW UFQFPN32 package 58
Temperature range, maximum power dissipation (range 6) TA -40 85 °C 59
Temperature range, maximum power dissipation (range 3) TA -40 125 °C 59
Junction temperature range (range 6) TJ -40 105 °C -40 °C ≤ TA ≤ 85 °C 59
Junction temperature range (range 3) TJ -40 130 °C -40 °C ≤ TA ≤ 125 °C 59
Power-on/power down reset threshold, falling edge VPOR/PDR 1 1.5 1.65 V Falling edge 60
Power-on/power down reset threshold, rising edge VPOR/PDR 1.3 1.5 1.65 V Rising edge 60
Reset temporization TRSTTEMPO 2 3.3 ms VDD rising, BOR enabled 60
Internal reference voltage VREFINT out 1.202 1.224 1.242 V -40 °C < TJ < +125 °C 61
Internal reference startup time TVREFINT 2 3 ms 61
Temperature coefficient of VREFINT TCoeff 25 100 ppm/°C -40 °C < TJ < +125 °C 61
Voltage coefficient of VREFINT VDDCoeff 2000 ppm/V 3.0 V < VDDA < 3.6 V 61
Supply current in Run mode, code executed from Flash, 1 MHz IDD (Run from Flash) 165 230 µA Range 3, VCORE=1.2 V, VOS[1:0]=11, HSI clock, 1 MHz 63
Supply current in Run mode, code executed from Flash, 32 MHz HSI IDD (Run from Flash) 6.25 7 mA Range 1, VCORE=1.8 V, VOS[1:0]=01, HSI clock 32 MHz 63
Supply current in Stop mode IDD (Stop) 0.41 1 µA TA = −40 to 25 °C 69
Supply current in Stop mode IDD (Stop) 0.63 2.1 µA TA = 55 °C 69
Supply current in Stop mode IDD (Stop) 1.7 4.5 µA TA = 85 °C 69
Supply current in Stop mode IDD (Stop) 4 9.6 µA TA = 105 °C 69
Supply current in Stop mode IDD (Stop) 11 24 µA TA = 125 °C 69
Supply current in Standby mode, independent watchdog and LSI enabled IDD (Standby) 1.3 1.7 µA TA = −40 to 25 °C 70
Supply current in Standby mode, independent watchdog and LSI enabled IDD (Standby) 8.5 µA TA = 125 °C 70
Supply current in Standby mode, independent watchdog and LSI OFF IDD (Standby) 0.29 0.6 µA TA = −40 to 25 °C 70
Supply current in Standby mode, independent watchdog and LSI OFF IDD (Standby) 2.6 7 µA TA = 125 °C 70
Accuracy of factory-calibrated HSI16 oscillator ACCHSI16 -1.5 1.5 % VDDA = 3.0 V, TA = 0 to 55 °C 79
Accuracy of factory-calibrated HSI16 oscillator ACCHSI16 -5.45 3.25 % VDDA = 1.65 V to 3.6 V, TA = −40 to 125 °C 79
HSI16 oscillator startup time tSU(HSI16) 3.7 6 µs 79
HSI16 oscillator power consumption IDD(HSI16) 100 140 µA 79
LSI oscillator frequency fLSI 26 38 56 kHz Guaranteed by test in production 80
LSI oscillator frequency drift DLSI -10 4 % 0°C ≤ TA ≤ 85°C; deviation for an individual part after initial measurement 80
PLL output clock fPLL_OUT 2 32 MHz 82
Operating voltage (Flash read/write/erase) VDD 1.65 3.6 V Read / Write / Erase 83

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: STM32L052K8U3TR
  • Footprint: Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm
  • 3D model: UFQFPN-32(5x5), generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: stm32l052k8u3tr-etched.step / stm32l052k8u3tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stm32l052k8u3tr.step / stm32l052k8u3tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (150 pp, sha256 ccec04f26ebfb036, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF