3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSTM32L052K8U3TR
STMicroelectronics · ST Microelectronics · UFQFPN-32(5x5)
STM32L052K8U3TR from STMicroelectronics, in a UFQFPN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model, then checked against ST open pin data). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Digital supply pin; the device operates from a 1.65 V to 3.6 V power supply. |
| 2 | PC14-OSC32_IN | bidirectional | 5 V tolerant I/O (FT) that also serves as OSC32_IN, the input of the 32 kHz LSE oscillator. |
| 3 | PC15-OSC32_OUT | bidirectional | Standard 3.3 V I/O (TC) that also serves as OSC32_OUT, the output of the 32 kHz LSE oscillator. |
| 4 | NRST | bidirectional | Bidirectional reset pin with embedded weak pull-up resistor. |
| 5 | VDDA | power_in | Analog supply pin (VDDA) referenced in the datasheet's general operating conditions and ADC/reference specifications. |
| 6 | PA0 | bidirectional | Standard 3.3 V I/O (TC) with alternate functions TIM2_CH1, TSC_G1_IO1, USART2_CTS, TIM2_ETR and COMP1_OUT, and additional functions ADC_IN0, COMP1_INM6 and RTC_TAMP2/WKUP1. |
| 7 | PA1 | bidirectional | 5 V tolerant I/O (FT) with alternate functions EVENTOUT, TIM2_CH2, TSC_G1_IO2, USART2_RTS/USART2_DE and TIM21_ETR, and additional functions ADC_IN1 and COMP1_INP. |
| 8 | PA2 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TIM21_CH1, TIM2_CH3, TSC_G1_IO3, USART2_TX and COMP2_OUT, and additional functions ADC_IN2 and COMP2_INM6. |
| 9 | PA3 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TIM21_CH2, TIM2_CH4, TSC_G1_IO4 and USART2_RX, and additional functions ADC_IN3 and COMP2_INP. |
| 10 | PA4 | bidirectional | Standard 3.3 V I/O (TC) offering reduced touch sensing sensitivity, so it is recommended to use it as a sampling capacitor I/O; alternate functions include SPI1_NSS, TSC_G2_IO1, USART2_CK and TIM22_ETR, and additional functions ADC_IN4 and DAC_OUT. |
| 11 | PA5 | bidirectional | Standard 3.3 V I/O (TC) with alternate functions SPI1_SCK, TIM2_ETR, TSC_G2_IO2 and TIM2_CH1, and additional functions ADC_IN5, COMP1_INM5 and COMP2_INM5. |
| 12 | PA6 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI1_MISO, TSC_G2_IO3, LPUART1_CTS, TIM22_CH1, EVENTOUT and COMP1_OUT, and additional function ADC_IN6. |
| 13 | PA7 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI1_MOSI, TSC_G2_IO4, TIM22_CH2, EVENTOUT and COMP2_OUT, and additional function ADC_IN7. |
| 14 | PB0 | bidirectional | 5 V tolerant I/O (FT) with alternate functions EVENTOUT and TSC_G3_IO2, and additional functions ADC_IN8 and VREF_OUT. |
| 15 | PB1 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TSC_G3_IO3 and LPUART1_RTS/LPUART1_DE, and additional functions ADC_IN9 and VREF_OUT. |
| 16 | PB2 | bidirectional | 5 V tolerant I/O (FT) with alternate functions LPTIM1_OUT and TSC_G3_IO4. |
| 17 | VDD | power_in | Digital supply pin; the device operates from a 1.65 V to 3.6 V power supply. |
| 18 | PA8 | bidirectional | 5 V tolerant I/O (FT) with alternate functions MCO, USB_CRS_SYNC, EVENTOUT and USART1_CK. |
| 19 | PA9 | bidirectional | 5 V tolerant I/O (FT) with alternate functions MCO, TSC_G4_IO1 and USART1_TX. |
| 20 | PA10 | bidirectional | 5 V tolerant I/O (FT) with alternate functions TSC_G4_IO2 and USART1_RX. |
| 21 | PA11 | bidirectional | 5 V tolerant I/O (FT) powered by VDD_USB, with alternate functions SPI1_MISO, EVENTOUT, TSC_G4_IO3, USART1_CTS and COMP1_OUT, and additional function USB_DM. |
| 22 | PA12 | bidirectional | 5 V tolerant I/O (FT) powered by VDD_USB, with alternate functions SPI1_MOSI, EVENTOUT, TSC_G4_IO4, USART1_RTS/USART1_DE and COMP2_OUT, and additional function USB_DP. |
| 23 | PA13 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SWDIO and USB_NOE. |
| 24 | PA14 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SWCLK and USART2_TX. |
| 25 | PA15 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI1_NSS, TIM2_ETR, EVENTOUT, USART2_RX and TIM2_CH1. |
| 26 | PB3 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI1_SCK, TIM2_CH2, TSC_G5I_O1 and EVENTOUT, and additional function COMP2_INN. |
| 27 | PB4 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI1_MISO, EVENTOUT, TSC_G5_IO2 and TIM22_CH1, and additional function COMP2_INP. |
| 28 | PB5 | bidirectional | 5 V tolerant I/O (FT) with alternate functions SPI1_MOSI, LPTIM1_IN1, I2C1_SMBA and TIM22_CH2, and additional function COMP2_INP. |
| 29 | PB6 | bidirectional | 5 V tolerant, FM+ capable I/O (FTf) with alternate functions USART1_TX, I2C1_SCL, LPTIM1_ETR and TSC_G5_IO3, and additional function COMP2_INP. |
| 30 | PB7 | bidirectional | 5 V tolerant, FM+ capable I/O (FTf) with alternate functions USART1_RX, I2C1_SDA, LPTIM1_IN2 and TSC_G5_IO4, and additional functions COMP2_INP and PVD_IN. |
| 31 | BOOT0 | input | Dedicated BOOT0 pin (structure B) per the pin-definition legend; its boot-mode behaviour is described in the boot modes section, which is not in this extract. |
| 32 | PB8 | bidirectional | 5 V tolerant, FM+ capable I/O (FTf) with alternate functions TSC_SYNC and I2C1_SCL. |
| 33 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | UFQFPN-32(5x5) |
| Category | Embedded Processors & Controllers |
| Pins | 33 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| External main supply voltage (VDD-VSS) | VDD-VSS | -0.3 | 4 | V | Including VDDA, VDD_USB, VDD | 56 | |
| Variations between different VDDx power pins | /ΔVDD/ | 50 | mV | 56 | |||
| Variations between any VDDx and VDDA power pins | /VDDA-VDDx/ | 300 | mV | 56 | |||
| Variations between all different ground pins | /ΔVSS/ | 50 | mV | 56 | |||
| Total current into sum of all VDD power lines (source) | ΣIVDD | 105 | mA | 57 | |||
| Total current out of sum of all VSS ground lines (sink) | ΣIVSS | 105 | mA | 57 | |||
| Total current into VDD_USB power lines (source) | ΣIVDD_USB | 25 | mA | 57 | |||
| Maximum current into each VDD power pin (source) | IVDD(PIN) | 100 | mA | 57 | |||
| Maximum current out of each VSS ground pin (sink) | IVSS(PIN) | 100 | mA | 57 | |||
| Output current sunk by any I/O and control pin except FTf pins | IIO | 16 | mA | Except FTf pins | 57 | ||
| Output current sunk by FTf pins | IIO | 22 | mA | FTf pins | 57 | ||
| Output current sourced by any I/O and control pin | IIO | -16 | mA | 57 | |||
| Total output current sunk by sum of all IOs and control pins | ΣIIO(PIN) | 90 | mA | Except PA11 and PA12 | 57 | ||
| Total output current sunk by PA11 and PA12 | ΣIIO(PIN) | 25 | mA | PA11 and PA12 | 57 | ||
| Total output current sourced by sum of all IOs and control pins | ΣIIO(PIN) | -90 | mA | 57 | |||
| Injected current on FT, FTf, RST and B pins | IINJ(PIN) | -5 | 0 | mA | Printed as -5/+0 | 57 | |
| Injected current on TC pin | IINJ(PIN) | -5 | 5 | mA | Printed as ±5 | 57 | |
| Total injected current (sum of all I/O and control pins) | ΣIINJ(PIN) | -25 | 25 | mA | Printed as ±25 | 57 | |
| Storage temperature range | TSTG | -65 | 150 | °C | 57 | ||
| Maximum junction temperature | TJ | 150 | °C | 57 | |||
| Internal AHB clock frequency | fHCLK | 0 | 32 | MHz | 58 | ||
| Standard operating voltage | VDD | 1.65 | 3.6 | V | BOR detector disabled | 58 | |
| Standard operating voltage | VDD | 1.8 | 3.6 | V | BOR detector enabled, at power-on | 58 | |
| Analog operating voltage (DAC not used) | VDDA | 1.65 | 3.6 | V | DAC not used; must be the same voltage as VDD | 58 | |
| Analog operating voltage (all features) | VDDA | 1.8 | 3.6 | V | All features; must be the same voltage as VDD | 58 | |
| Standard operating voltage, USB domain | VDD_USB | 3 | 3.6 | V | USB peripheral used | 58 | |
| Standard operating voltage, USB domain | VDD_USB | 0 | 3.6 | V | USB peripheral not used | 58 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.5 | V | 2.0 V ≤ VDD ≤ 3.6 V | 58 | |
| Input voltage on FT, FTf and RST pins | VIN | -0.3 | 5.2 | V | 1.65 V ≤ VDD ≤ 2.0 V | 58 | |
| Input voltage on BOOT0 pin | VIN | 0 | 5.5 | V | 58 | ||
| Power dissipation at TA = 85 °C (range 6) or 105 °C (range 7), UFQFPN32 | PD | 526 | mW | UFQFPN32 package | 58 | ||
| Power dissipation at TA = 125 °C (range 3), UFQFPN32 | PD | 132 | mW | UFQFPN32 package | 58 | ||
| Temperature range, maximum power dissipation (range 6) | TA | -40 | 85 | °C | 59 | ||
| Temperature range, maximum power dissipation (range 3) | TA | -40 | 125 | °C | 59 | ||
| Junction temperature range (range 6) | TJ | -40 | 105 | °C | -40 °C ≤ TA ≤ 85 °C | 59 | |
| Junction temperature range (range 3) | TJ | -40 | 130 | °C | -40 °C ≤ TA ≤ 125 °C | 59 | |
| Power-on/power down reset threshold, falling edge | VPOR/PDR | 1 | 1.5 | 1.65 | V | Falling edge | 60 |
| Power-on/power down reset threshold, rising edge | VPOR/PDR | 1.3 | 1.5 | 1.65 | V | Rising edge | 60 |
| Reset temporization | TRSTTEMPO | 2 | 3.3 | ms | VDD rising, BOR enabled | 60 | |
| Internal reference voltage | VREFINT out | 1.202 | 1.224 | 1.242 | V | -40 °C < TJ < +125 °C | 61 |
| Internal reference startup time | TVREFINT | 2 | 3 | ms | 61 | ||
| Temperature coefficient of VREFINT | TCoeff | 25 | 100 | ppm/°C | -40 °C < TJ < +125 °C | 61 | |
| Voltage coefficient of VREFINT | VDDCoeff | 2000 | ppm/V | 3.0 V < VDDA < 3.6 V | 61 | ||
| Supply current in Run mode, code executed from Flash, 1 MHz | IDD (Run from Flash) | 165 | 230 | µA | Range 3, VCORE=1.2 V, VOS[1:0]=11, HSI clock, 1 MHz | 63 | |
| Supply current in Run mode, code executed from Flash, 32 MHz HSI | IDD (Run from Flash) | 6.25 | 7 | mA | Range 1, VCORE=1.8 V, VOS[1:0]=01, HSI clock 32 MHz | 63 | |
| Supply current in Stop mode | IDD (Stop) | 0.41 | 1 | µA | TA = −40 to 25 °C | 69 | |
| Supply current in Stop mode | IDD (Stop) | 0.63 | 2.1 | µA | TA = 55 °C | 69 | |
| Supply current in Stop mode | IDD (Stop) | 1.7 | 4.5 | µA | TA = 85 °C | 69 | |
| Supply current in Stop mode | IDD (Stop) | 4 | 9.6 | µA | TA = 105 °C | 69 | |
| Supply current in Stop mode | IDD (Stop) | 11 | 24 | µA | TA = 125 °C | 69 | |
| Supply current in Standby mode, independent watchdog and LSI enabled | IDD (Standby) | 1.3 | 1.7 | µA | TA = −40 to 25 °C | 70 | |
| Supply current in Standby mode, independent watchdog and LSI enabled | IDD (Standby) | 8.5 | µA | TA = 125 °C | 70 | ||
| Supply current in Standby mode, independent watchdog and LSI OFF | IDD (Standby) | 0.29 | 0.6 | µA | TA = −40 to 25 °C | 70 | |
| Supply current in Standby mode, independent watchdog and LSI OFF | IDD (Standby) | 2.6 | 7 | µA | TA = 125 °C | 70 | |
| Accuracy of factory-calibrated HSI16 oscillator | ACCHSI16 | -1.5 | 1.5 | % | VDDA = 3.0 V, TA = 0 to 55 °C | 79 | |
| Accuracy of factory-calibrated HSI16 oscillator | ACCHSI16 | -5.45 | 3.25 | % | VDDA = 1.65 V to 3.6 V, TA = −40 to 125 °C | 79 | |
| HSI16 oscillator startup time | tSU(HSI16) | 3.7 | 6 | µs | 79 | ||
| HSI16 oscillator power consumption | IDD(HSI16) | 100 | 140 | µA | 79 | ||
| LSI oscillator frequency | fLSI | 26 | 38 | 56 | kHz | Guaranteed by test in production | 80 |
| LSI oscillator frequency drift | DLSI | -10 | 4 | % | 0°C ≤ TA ≤ 85°C; deviation for an individual part after initial measurement | 80 | |
| PLL output clock | fPLL_OUT | 2 | 32 | MHz | 82 | ||
| Operating voltage (Flash read/write/erase) | VDD | 1.65 | 3.6 | V | Read / Write / Erase | 83 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
STM32L052K8U3TR - Footprint:
Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm - 3D model: UFQFPN-32(5x5), generated on the KiCad land (body 5 x 5 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stm32l052k8u3tr-etched.step/stm32l052k8u3tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm32l052k8u3tr.step/stm32l052k8u3tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (150 pp, sha256
ccec04f26ebfb036, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).