3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTSC2007IPW
Texas Instruments · Touch Screen Controllers · TSSOP-16
TSC2007IPW from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD/REF | power_in | Supply voltage (1.2V to 3.6V specified) and external reference input; abs max -0.3 to +5V relative to GND. |
| 2 | X+ | input | X+ analog channel input to the touch screen interface, rated -0.4V to VDD + 0.1V. |
| 3 | Y+ | input | Y+ analog channel input to the touch screen interface, rated -0.4V to VDD + 0.1V. |
| 4 | X- | input | X- analog channel input to the touch screen interface, rated -0.4V to VDD + 0.1V. |
| 5 | Y- | input | Y- analog channel input to the touch screen interface, rated -0.4V to VDD + 0.1V. |
| 6 | GND | power_in | Ground; should be connected to a clean ground point. |
| 7 | NC | unconnected | No connection. |
| 8 | NC | unconnected | No connection. |
| 9 | NC | unconnected | No connection. |
| 10 | PENIRQ | output | Active-low data-available interrupt output (delayed pen touch detect) with programmable on-chip pull-up of 51kΩ or 90kΩ typ at 1.8V. |
| 11 | SDA | bidirectional | I2C serial data input/output. |
| 12 | SCL | bidirectional | I2C serial clock, normally an input but acts as an output when the device stretches the clock to delay a bus transfer. |
| 13 | A1 | input | I2C address input bit 1. |
| 14 | A0 | input | I2C address input bit 0. |
| 15 | NC | unconnected | No connection. |
| 16 | AUX | input | Auxiliary analog channel input with range 0 to VDD. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Data Converters |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Auxiliary input voltage range | 0 | V | 0 to VDD | 3 | |||
| AUX input leakage current | -1 | 1 | µA | 3 | |||
| Power-supply voltage | VDD | 1.2 | 3.6 | V | Specified performance | 4 | |
| Power-down supply current | 0 | 0.8 | µA | Not addressed, SCL = SDA = 1 | 4 | ||
| Quiescent supply current | 128 | 190 | µA | VDD = 1.2V, 32.56k eq rate, 12-bit Fast mode, PD[1:0]=0,0 | 4 | ||
| Quiescent supply current | 165 | 240 | µA | VDD = 1.8V, 34.42k eq rate, 12-bit Fast mode, PD[1:0]=0,0 | 4 | ||
| Quiescent supply current | 226.2 | 335 | µA | VDD = 2.7V, 34.79k eq rate, 12-bit Fast mode, PD[1:0]=0,0 | 4 | ||
| Output low voltage | VOL | 0 | 0.2 | V | IOL = 2 TTL loads | 4 | |
| Input leakage current | IIL | -1 | 1 | µA | SCL and SDA pins | 4 | |
| Floating output leakage current | ILEAK | -1 | 1 | µA | Floating output | 4 | |
| Temperature sensor range | -40 | 85 | °C | 3 | |||
| Switch drive current | 50 | mA | 100ms duration; specified by design, not tested | 3 | |||
| VDD off ramp | tVDD_OFF_RAMP | 2 | kV/s | TA = -40°C to +85°C | 31 | ||
| VDD off time | tVDD_OFF | 1.2 | s | TA = -40°C to +85°C, VDD = 0V | 31 | ||
| VDD off time | tVDD_OFF | 0.3 | s | TA = -20°C to +85°C, VDD = 0V | 31 | ||
| VDD on ramp | tVDD_ON_RAMP | 12 | kV/s | TA = -40°C to +85°C | 31 | ||
| SCL clock frequency (High-Speed) | fSCL | 0 | 3.4 | MHz | 8 | ||
| Hold time repeated START (High-Speed) | tHD,STA | 160 | ns | 8 | |||
| Low period of SCL (High-Speed) | tLOW | 160 | ns | 8 | |||
| High period of SCL (High-Speed) | tHIGH | 60 | ns | 8 | |||
| Setup time repeated START (High-Speed) | tSU,STA | 160 | ns | 8 | |||
| Data hold time (High-Speed) | tHD,DAT | 0 | 70 | ns | 8 | ||
| Data setup time (High-Speed) | tSU,DAT | 10 | ns | 8 | |||
| Rise time SCL (High-Speed) | tR | 10 | 40 | ns | Cb = total bus capacitance | 8 | |
| Rise time SDA (High-Speed) | tR | 10 | 80 | ns | Cb = total bus capacitance | 8 | |
| Fall time SCL (High-Speed) | tF | 10 | 40 | ns | Cb = total bus capacitance | 8 | |
| Fall time SDA (High-Speed) | tF | 10 | 80 | ns | Cb = total bus capacitance | 8 | |
| Setup time STOP (High-Speed) | tSU,STO | 160 | ns | 8 | |||
| Capacitive load per bus line (High-Speed) | Cb | 100 | pF | Cb = total capacitance of one bus line in pF | 8 | ||
| Analog input X+, Y+, AUX to GND | -0.4 | V | Upper limit VDD + 0.1 V | 2 | |||
| Analog input X-, Y- to GND | -0.4 | V | Upper limit VDD + 0.1 V | 2 | |||
| VDD/REF pin to GND | -0.3 | 5 | V | 2 | |||
| Digital input voltage to GND | -0.3 | V | Upper limit VDD + 0.3 V | 2 | |||
| Digital output voltage to GND | -0.3 | V | Upper limit VDD + 0.3 V | 2 | |||
| Operating free-air temperature range | TA | -40 | 85 | °C | 2 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 2 | ||
| Junction temperature | TJ Max | 150 | °C | 2 | |||
| Lead temperature, vapor phase | 215 | °C | 60 sec | 2 | |||
| Lead temperature, infrared | 220 | °C | 15 sec | 2 | |||
| IEC contact discharge | -15 | 15 | kV | X+, X-, Y+, Y- | 2 | ||
| IEC air discharge | -25 | 25 | kV | X+, X-, Y+, Y- | 2 | ||
| Thermal impedance, TSSOP package | θJA | 86 | °C/W | TSSOP package | 2 | ||
| Input capacitance (AUX) | 12 | pF | 3 | ||||
| Integral linearity | 1.5 | LSB | printed ±1.5 | 3 | |||
| PENIRQ pull-up resistor | RIRQ | 51 | kΩ | TA = +25°C, VDD = 1.8V, command '1011' set '0000' | 3 | ||
| PENIRQ pull-up resistor | RIRQ | 90 | kΩ | TA = +25°C, VDD = 1.8V, command '1011' set '0001' | 3 | ||
| Switch on-resistance Y+, X+ | 6 | Ω | 3 | ||||
| Switch on-resistance Y-, X- | 5 | Ω | 3 | ||||
| Input capacitance SCL, SDA | CIN | 10 | pF | SCL and SDA pins | 4 | ||
| Floating output capacitance | COUT | 10 | pF | Floating output | 4 |
CAD (KiCad official)
- Symbol:
TSC2007IPW - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
tsc2007ipw-etched.step/tsc2007ipw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tsc2007ipw.step/tsc2007ipw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (43 pp, sha256
323aaeadff2a88d7, retrieved 2026-10-26, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).