main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers tsc2007ipw: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
tsc2007ipw-etched.glb Publish 0.1.0 · Ray
tsc2007ipw-etched.step tsc2007ipw: factory component page (tier=mfr) · Ray
tsc2007ipw-hero.glb tsc2007ipw: hero GLB from the etched model (keeps the MPN mark) · Ray
tsc2007ipw-hero.overlay.json Publish 0.1.0 · Ray
tsc2007ipw.glb Publish 0.1.0 · Ray
tsc2007ipw.kicad_mod Publish 0.1.0 · Ray
tsc2007ipw.kicad_sym Publish 0.1.0 · Ray
tsc2007ipw.lbr Publish 0.1.0 · Ray
tsc2007ipw.step Publish 0.1.0 · Ray

TSC2007IPW

Texas Instruments · Touch Screen Controllers · TSSOP-16

TSC2007IPW from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD/REF power_in Supply voltage (1.2V to 3.6V specified) and external reference input; abs max -0.3 to +5V relative to GND.
2 X+ input X+ analog channel input to the touch screen interface, rated -0.4V to VDD + 0.1V.
3 Y+ input Y+ analog channel input to the touch screen interface, rated -0.4V to VDD + 0.1V.
4 X- input X- analog channel input to the touch screen interface, rated -0.4V to VDD + 0.1V.
5 Y- input Y- analog channel input to the touch screen interface, rated -0.4V to VDD + 0.1V.
6 GND power_in Ground; should be connected to a clean ground point.
7 NC unconnected No connection.
8 NC unconnected No connection.
9 NC unconnected No connection.
10 PENIRQ output Active-low data-available interrupt output (delayed pen touch detect) with programmable on-chip pull-up of 51kΩ or 90kΩ typ at 1.8V.
11 SDA bidirectional I2C serial data input/output.
12 SCL bidirectional I2C serial clock, normally an input but acts as an output when the device stretches the clock to delay a bus transfer.
13 A1 input I2C address input bit 1.
14 A0 input I2C address input bit 0.
15 NC unconnected No connection.
16 AUX input Auxiliary analog channel input with range 0 to VDD.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-16
Category Data Converters
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Auxiliary input voltage range 0 V 0 to VDD 3
AUX input leakage current -1 1 µA 3
Power-supply voltage VDD 1.2 3.6 V Specified performance 4
Power-down supply current 0 0.8 µA Not addressed, SCL = SDA = 1 4
Quiescent supply current 128 190 µA VDD = 1.2V, 32.56k eq rate, 12-bit Fast mode, PD[1:0]=0,0 4
Quiescent supply current 165 240 µA VDD = 1.8V, 34.42k eq rate, 12-bit Fast mode, PD[1:0]=0,0 4
Quiescent supply current 226.2 335 µA VDD = 2.7V, 34.79k eq rate, 12-bit Fast mode, PD[1:0]=0,0 4
Output low voltage VOL 0 0.2 V IOL = 2 TTL loads 4
Input leakage current IIL -1 1 µA SCL and SDA pins 4
Floating output leakage current ILEAK -1 1 µA Floating output 4
Temperature sensor range -40 85 °C 3
Switch drive current 50 mA 100ms duration; specified by design, not tested 3
VDD off ramp tVDD_OFF_RAMP 2 kV/s TA = -40°C to +85°C 31
VDD off time tVDD_OFF 1.2 s TA = -40°C to +85°C, VDD = 0V 31
VDD off time tVDD_OFF 0.3 s TA = -20°C to +85°C, VDD = 0V 31
VDD on ramp tVDD_ON_RAMP 12 kV/s TA = -40°C to +85°C 31
SCL clock frequency (High-Speed) fSCL 0 3.4 MHz 8
Hold time repeated START (High-Speed) tHD,STA 160 ns 8
Low period of SCL (High-Speed) tLOW 160 ns 8
High period of SCL (High-Speed) tHIGH 60 ns 8
Setup time repeated START (High-Speed) tSU,STA 160 ns 8
Data hold time (High-Speed) tHD,DAT 0 70 ns 8
Data setup time (High-Speed) tSU,DAT 10 ns 8
Rise time SCL (High-Speed) tR 10 40 ns Cb = total bus capacitance 8
Rise time SDA (High-Speed) tR 10 80 ns Cb = total bus capacitance 8
Fall time SCL (High-Speed) tF 10 40 ns Cb = total bus capacitance 8
Fall time SDA (High-Speed) tF 10 80 ns Cb = total bus capacitance 8
Setup time STOP (High-Speed) tSU,STO 160 ns 8
Capacitive load per bus line (High-Speed) Cb 100 pF Cb = total capacitance of one bus line in pF 8
Analog input X+, Y+, AUX to GND -0.4 V Upper limit VDD + 0.1 V 2
Analog input X-, Y- to GND -0.4 V Upper limit VDD + 0.1 V 2
VDD/REF pin to GND -0.3 5 V 2
Digital input voltage to GND -0.3 V Upper limit VDD + 0.3 V 2
Digital output voltage to GND -0.3 V Upper limit VDD + 0.3 V 2
Operating free-air temperature range TA -40 85 °C 2
Storage temperature range TSTG -65 150 °C 2
Junction temperature TJ Max 150 °C 2
Lead temperature, vapor phase 215 °C 60 sec 2
Lead temperature, infrared 220 °C 15 sec 2
IEC contact discharge -15 15 kV X+, X-, Y+, Y- 2
IEC air discharge -25 25 kV X+, X-, Y+, Y- 2
Thermal impedance, TSSOP package θJA 86 °C/W TSSOP package 2
Input capacitance (AUX) 12 pF 3
Integral linearity 1.5 LSB printed ±1.5 3
PENIRQ pull-up resistor RIRQ 51 kΩ TA = +25°C, VDD = 1.8V, command '1011' set '0000' 3
PENIRQ pull-up resistor RIRQ 90 kΩ TA = +25°C, VDD = 1.8V, command '1011' set '0001' 3
Switch on-resistance Y+, X+ 6 Ω 3
Switch on-resistance Y-, X- 5 Ω 3
Input capacitance SCL, SDA CIN 10 pF SCL and SDA pins 4
Floating output capacitance COUT 10 pF Floating output 4

CAD (KiCad official)

  • Symbol: TSC2007IPW
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: tsc2007ipw-etched.step / tsc2007ipw-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tsc2007ipw.step / tsc2007ipw.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (43 pp, sha256 323aaeadff2a88d7, retrieved 2026-10-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF