3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT3509EDE#TRPBF
Analog Devices · DC-DC Converters · DFN-14(3x4)
LT3509EDE#TRPBF from Analog Devices, in a DFN-14(3x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DA1 | passive | DA1 is the anode connection for catch diode 1, connected internally to the exposed ground pad through a current sensing resistor. |
| 2 | BOOST1 | passive | BOOST1 dynamically boosts the power transistor base above VIN and must be tied to SW1 through the boost capacitor. |
| 3 | SW1 | power_out | SW1 is the internal power switch 1 output, connected to the inductor, catch diode cathode and boost capacitor. |
| 4 | VIN | power_in | VIN supplies power to the internal switches and control circuitry, with 36V maximum for continuous operation and 60V for non-repetitive 1 second transients. |
| 5 | SW2 | power_out | SW2 is the internal power switch 2 output, connected to the inductor, catch diode cathode and boost capacitor. |
| 6 | BOOST2 | passive | BOOST2 dynamically boosts the power transistor base above VIN and must be tied to SW2 through the boost capacitor. |
| 7 | DA2 | passive | DA2 is the anode connection for catch diode 2, connected internally to the exposed ground pad through a current sensing resistor. |
| 8 | FB2 | input | FB2 sets the regulated output 2 voltage through a resistor divider so the pin is at 0.8V when the output is at the desired voltage. |
| 9 | RUN/SS2 | input | RUN/SS2 enables channel 2 with full output current available above 2V, shuts down when both pins are pulled to ground, and must not be tied to VIN. |
| 10 | RT | passive | RT sets the internal oscillator frequency, where a 40.2k resistor from RT to ground gives a nominal frequency of 1MHz. |
| 11 | SYNC | input | SYNC synchronizes the switching frequency to an external clock and must not be allowed to float, so tie it low through 10kΩ or less if unused. |
| 12 | BD | power_in | BD is the common anode of the internal Schottky boost diodes, provides charging power for the BOOST capacitors, and should be locally bypassed. |
| 13 | RUN/SS1 | input | RUN/SS1 enables channel 1 with full output current available above 2V, shuts down when both pins are pulled to ground, and must not be tied to VIN. |
| 14 | FB1 | input | FB1 sets the regulated output 1 voltage through a resistor divider so the pin is at 0.8V when the output is at the desired voltage. |
| 15 | GND | power_in | The exposed pad is GND, the reference and supply ground for the regulator, and must be soldered to the PCB and electrically connected to supply ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-14(3x4) |
| Category | Power Management |
| Pins | 15 |
CAD (KiCad official)
- Symbol:
LT3509EDE#TRPBF - Footprint:
Package_DFN_QFN:DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm - 3D model: DFN-14(3x4) (KiCad packages3D, STEP)
- 3D model files:
lt3509ede-trpbf-etched.step/lt3509ede-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3509ede-trpbf.step/lt3509ede-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
8f003028ba275e36, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).