main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt3509ede-trpbf: viewers · Ray
lt3509ede-trpbf-etched.glb Publish 0.1.0 · Ray
lt3509ede-trpbf-etched.step lt3509ede-trpbf: factory component page (tier=mfr) · Ray
lt3509ede-trpbf-hero.glb lt3509ede-trpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt3509ede-trpbf-hero.overlay.json Publish 0.1.0 · Ray
lt3509ede-trpbf.glb Publish 0.1.0 · Ray
lt3509ede-trpbf.kicad_mod Publish 0.1.0 · Ray
lt3509ede-trpbf.kicad_sym Publish 0.1.0 · Ray
lt3509ede-trpbf.lbr Publish 0.1.0 · Ray
lt3509ede-trpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

LT3509EDE#TRPBF

Analog Devices · DC-DC Converters · DFN-14(3x4)

LT3509EDE#TRPBF from Analog Devices, in a DFN-14(3x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DA1 passive DA1 is the anode connection for catch diode 1, connected internally to the exposed ground pad through a current sensing resistor.
2 BOOST1 passive BOOST1 dynamically boosts the power transistor base above VIN and must be tied to SW1 through the boost capacitor.
3 SW1 power_out SW1 is the internal power switch 1 output, connected to the inductor, catch diode cathode and boost capacitor.
4 VIN power_in VIN supplies power to the internal switches and control circuitry, with 36V maximum for continuous operation and 60V for non-repetitive 1 second transients.
5 SW2 power_out SW2 is the internal power switch 2 output, connected to the inductor, catch diode cathode and boost capacitor.
6 BOOST2 passive BOOST2 dynamically boosts the power transistor base above VIN and must be tied to SW2 through the boost capacitor.
7 DA2 passive DA2 is the anode connection for catch diode 2, connected internally to the exposed ground pad through a current sensing resistor.
8 FB2 input FB2 sets the regulated output 2 voltage through a resistor divider so the pin is at 0.8V when the output is at the desired voltage.
9 RUN/SS2 input RUN/SS2 enables channel 2 with full output current available above 2V, shuts down when both pins are pulled to ground, and must not be tied to VIN.
10 RT passive RT sets the internal oscillator frequency, where a 40.2k resistor from RT to ground gives a nominal frequency of 1MHz.
11 SYNC input SYNC synchronizes the switching frequency to an external clock and must not be allowed to float, so tie it low through 10kΩ or less if unused.
12 BD power_in BD is the common anode of the internal Schottky boost diodes, provides charging power for the BOOST capacitors, and should be locally bypassed.
13 RUN/SS1 input RUN/SS1 enables channel 1 with full output current available above 2V, shuts down when both pins are pulled to ground, and must not be tied to VIN.
14 FB1 input FB1 sets the regulated output 1 voltage through a resistor divider so the pin is at 0.8V when the output is at the desired voltage.
15 GND power_in The exposed pad is GND, the reference and supply ground for the regulator, and must be soldered to the PCB and electrically connected to supply ground.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-14(3x4)
Category Power Management
Pins 15

CAD (KiCad official)

  • Symbol: LT3509EDE#TRPBF
  • Footprint: Package_DFN_QFN:DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm
  • 3D model: DFN-14(3x4) (KiCad packages3D, STEP)
  • 3D model files: lt3509ede-trpbf-etched.step / lt3509ede-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3509ede-trpbf.step / lt3509ede-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 8f003028ba275e36, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF