main
Ray Publish 0.1.0 0f4d56e
{
  "slug": "lt3509ede-trpbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Converters, DFN-14(3x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management",
    "lt3509ede#trpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt3509ede-trpbf.kicad_sym",
    "lt3509ede-trpbf.kicad_mod",
    "lt3509ede-trpbf.glb",
    "lt3509ede-trpbf.step",
    "lt3509ede-trpbf.lbr",
    "docs/hero.png",
    "docs/lt3509ede-trpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt3509ede-trpbf-hero.glb",
    "lt3509ede-trpbf-hero.overlay.json",
    "lt3509ede-trpbf-etched.glb"
  ],
  "component": {
    "mpn": "LT3509EDE#TRPBF",
    "manufacturer": "Analog Devices",
    "package": "DFN-14(3x4)",
    "pin_count": 15,
    "category": "Power Management",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/3509fd.pdf",
    "parts": {
      "symbol": "lt3509ede-trpbf.kicad_sym",
      "footprint": "lt3509ede-trpbf.kicad_mod",
      "model_3d": "lt3509ede-trpbf-hero.glb",
      "model_3d_plain": "lt3509ede-trpbf-etched.glb",
      "model_3d_step": "lt3509ede-trpbf-etched.step",
      "model_3d_step_plain": "lt3509ede-trpbf.step",
      "lbr": "lt3509ede-trpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C7451081",
      "digikey": "LT3509EDE#TRPBFTR-ND",
      "mouser": "584-LT3509EDE#TRPBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T16:39:36Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LT3509EDE#TRPBFTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT3509EDE#TRPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "DA1",
        "type": "passive",
        "description": "DA1 is the anode connection for catch diode 1, connected internally to the exposed ground pad through a current sensing resistor."
      },
      {
        "number": "2",
        "name": "BOOST1",
        "type": "passive",
        "description": "BOOST1 dynamically boosts the power transistor base above VIN and must be tied to SW1 through the boost capacitor."
      },
      {
        "number": "3",
        "name": "SW1",
        "type": "power_out",
        "description": "SW1 is the internal power switch 1 output, connected to the inductor, catch diode cathode and boost capacitor."
      },
      {
        "number": "4",
        "name": "VIN",
        "type": "power_in",
        "description": "VIN supplies power to the internal switches and control circuitry, with 36V maximum for continuous operation and 60V for non-repetitive 1 second transients."
      },
      {
        "number": "5",
        "name": "SW2",
        "type": "power_out",
        "description": "SW2 is the internal power switch 2 output, connected to the inductor, catch diode cathode and boost capacitor."
      },
      {
        "number": "6",
        "name": "BOOST2",
        "type": "passive",
        "description": "BOOST2 dynamically boosts the power transistor base above VIN and must be tied to SW2 through the boost capacitor."
      },
      {
        "number": "7",
        "name": "DA2",
        "type": "passive",
        "description": "DA2 is the anode connection for catch diode 2, connected internally to the exposed ground pad through a current sensing resistor."
      },
      {
        "number": "8",
        "name": "FB2",
        "type": "input",
        "description": "FB2 sets the regulated output 2 voltage through a resistor divider so the pin is at 0.8V when the output is at the desired voltage."
      },
      {
        "number": "9",
        "name": "RUN/SS2",
        "type": "input",
        "description": "RUN/SS2 enables channel 2 with full output current available above 2V, shuts down when both pins are pulled to ground, and must not be tied to VIN."
      },
      {
        "number": "10",
        "name": "RT",
        "type": "passive",
        "description": "RT sets the internal oscillator frequency, where a 40.2k resistor from RT to ground gives a nominal frequency of 1MHz."
      },
      {
        "number": "11",
        "name": "SYNC",
        "type": "input",
        "description": "SYNC synchronizes the switching frequency to an external clock and must not be allowed to float, so tie it low through 10kΩ or less if unused."
      },
      {
        "number": "12",
        "name": "BD",
        "type": "power_in",
        "description": "BD is the common anode of the internal Schottky boost diodes, provides charging power for the BOOST capacitors, and should be locally bypassed."
      },
      {
        "number": "13",
        "name": "RUN/SS1",
        "type": "input",
        "description": "RUN/SS1 enables channel 1 with full output current available above 2V, shuts down when both pins are pulled to ground, and must not be tied to VIN."
      },
      {
        "number": "14",
        "name": "FB1",
        "type": "input",
        "description": "FB1 sets the regulated output 1 voltage through a resistor divider so the pin is at 0.8V when the output is at the desired voltage."
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "The exposed pad is GND, the reference and supply ground for the regulator, and must be soldered to the PCB and electrically connected to supply ground."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The extracted DE14 top-view label order does not match the DFN pin numbers in the Pin Functions sect"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0215,
        "at": "2026-10-28T16:39:27"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/3509fd.pdf",
        "pages": 24,
        "sha256": "8f003028ba275e36",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 15,
        "described": 15,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt3509ede-trpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "be5cff1a18ac6ffbe197561441c1546755e61de7ca02dcc6734fc20d3d6c79dd",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt3509ede-trpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "dd351771c128450a17e17de2a724a90f106a0d161c2aab385589237dc43be7fd",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}